FUFU & GAGA KF180139-01 User manual

Version:04/06/2023 1/35
KF180139-
Shoe Cabinet
01

please read the entire manual before starting to assemble
and/or using this product.follow the manual thoroughly and
keep it for further reference.
IMPORTANT INFORMATION!
It is important that any product which is assembled using any kind of screw is re-tightened
2 weeks after assembly,and once every 3 months - in order to assure stability through-out
the lifespan of the product.
For regular maintenance and cleaning of the product, for the frame, please use a rag dipped
in neutral detergent to fully wipe it, and then dry it with a clean rag.For glass materials, wipe
with a rag dampened with water glass cleaner, and then dry with a dry rag.
Do not use an electric screwdriver, and do not use too much force when installing, because
Overturned furniture can cause serious or fatal crush injuries. To prevent tipping over, be sure
IMPORTANT !
the board is easy to break.
to use the wall attachment, if not included with this product. Please purchase the wall
attachment that fit your wall. If unsure, seek professional advice. Please read and follow each
ANTI-TOPPLE WARNING !
step of the instructions carefully.
Try to find a partner to install
with you, which can speed up
the installation efficiency and
In order to avoid scratching this
IMPROVE EFFICIENCY !
shorten the time.
furnuture should be assembled
AVOID SCRATCHES!
on a soft layer-could be a rug.
2/35

3/35
3×12

4/35
This is a permanent label.
Do not remove!
ALWAYS install tipover restraint
provided.
NEVER put a TV on this product.
NEVER allow children to stand,climb
or hang on drawers,doors,or shelves.
NEVER open more than one drawer
at a time.
Place heaviest items in the lowest
drawers.
x 2
1
2
3
4
5
6
78
10
11
12
13
14
15
16
17
18
18
19
20
21
22
23
22
22
24
25
26

1
5 x 31 mm
A x 4 D x 1
5/35
A
A
A
A
D
D
D
1
A
A
1
D
D
D
1
Insert quickfit screw(A) into plate 1
with a screwdriver as shown.
Fix handle(D) to plate 1.

2
6/35
5 x 31 mm
A x 4
AA
AA
2
3
A
A
Insert quickfit screw(A) into plate 2 and 3
with a screwdriver as shown.

3
15 x 9.5 mm
K x 4
7/35
A
K
K
2
4
3
K
K
4
Attach plate 2 and 3 to plate 4, add
cam lock(K) into plate 4 and turn
clockwise to tighten as shown.

4
8/35
15 x 9.5 mm
K x 4
2
3
180°
K
K
5
1
2
K
1
K
4
Slide bottom plate 5 along grooves as shown.
Attach plate 1 to plate 2 and 3, add cam lock(K)
into plate 2,3 and turn clockwise to tighten as shown.

5
3 x 12 mm
Px 4 G x 1
9/35
DL
DR
DL
DR
DR
DL
5
3
2
2
Fix runner(DL) and (DR) to plate 2 and 3
with screw(P) as shown.

6
10/35
5 x 31 mm
A x 6
A
A
A
A
A
A
20
Insert quickfit screw(A) into plate 20
with a screwdriver as shown.
A
A
20

7
11/35
5 x 31 mm
A x 10
A
A
A
A
A
A
AA
A
A
21
Insert quickfit screw(A) into plate 21
with a screwdriver as shown.
A
A
21

8
12/35
5 x 31 mm
A x 4
A
A
A
A
17
A
A
17
17
Insert quickfit screw(A) into plate 17
with a screwdriver as shown.

9
15 x 11 mm
B x 4
6 x 30 mm
C x 4
13/35
B
B
C
C
C
C
17
18
18
B
C
C18
17
Insert wooden dowel(C) into plate 18 at first,
then attach to plate 17.
Add cam lock(B) into plate 18 and turn
clockwise to tighten as shown.

10
14/35
5 x 31 mm
A x 4
A
A
A
A
17
A17
Insert quickfit screw(A) into plate 17 with
a screwdriver as shown.

11
15/35
5 x 31 mm
A x 6 H x 2
H
H
A
A
A
A
AA
13
AA
H
Insert quickfit screw(A) into plate 13 with
a screwdriver as shown.
Knock part(H) into plate 13 as shown.

12
16/35
3 x 12 mm
P x 4 G x 1
CL
13
G-CL
Fix slide rail(CL) to plate 13
with screw(P) as shown.

13
17/35
5 x 31 mm
A x 2 H x 2
H
H
A
A
14 H
A
Insert quickfit screw(A) into plate 14
with a screwdriver as shown.
Knock part(H) into plate 14 as shown.

14
G x 1
18/35
CR
3 x 12mm
P x 2
14
G-CR
Fix slide rail(CR) to plate 14
with screw(P) as shown.

15
19/35
15 x 11 mm
B x 2
6 x 30 mm
C x 2
B
BC
C
14
15
B
C
Insert wooden dowel(C) into plate 14 at first,
then attach plate 15 to.
Add cam lock(B) into plate 15 and turn clockwise
to tighten as shown.

16
20/35
15 x 11 mm
B x 2
6 x 30 mm
C x 2
B
C
C
14
Insert wooden dowel(C) into plate 17 at first,
then attach plate 14 to.
Add cam lock(B) into plate 14 and turn clockwise
to tighten as shown.
14
15
17
18
B
B