FUFU & GAGA KF21012 User manual

ASSEMBLY INSTRUCTION
NOTE: 50% TIGHTEN BEFORE FIXING ALL BOLTS
Item N.O.: KF21012
Item name: L shape sofa set

Helpful Hints
Before You Start
PEOPLE NEEDED FOR ASSEMBLY: 1 - 2
ESTIMATED ASSEMBLY TIME: 1 HOUR
‐Open your item in the area you plan to keep it to avoid excessive heavy lifting.
‐Identify, sort and count the parts before attempting assembly.
‐Compression dowels are lightly tapped in with a hammer.
‐Slides are labeled with a R (right) and L (left) for proper placement.
‐Make sure to always face the point on the top of the Cam Lock towards the outer edge.
‐Use all the nails provided for the back panel and spread them out equally.
‐Back panel must be used to make sure your unit is sturdy.
‐Do NOT use harsh chemicals or abrasive cleaners on this item.
‐Never push, pull, or drag your furniture.
‐Read through each step carefully and follow the proper order
‐Separate and count all your parts and hardware
‐Give yourself enough room for the assembly process
‐Have the following tools: Hammer
‐Caution: If using a power drill or power screwdriver for screwing,
please be aware to slow down and stop when screw is tight.
Failure to do so may result in stripping the screw.

C
B
A
1
1
1
2
2
2
2
2
3
STEP 1
Connect Right Frame (A) & Right back frame (B) with Bolt (1)
STEP 2
Connect part from STEP 1 & Right seat frame (C) with Bolt (2) & (3)
50%
50%
3 pcs
1
6 pcs
2
1 pc
3
x2
x2

D
P
Q
T
33
3
3
STEP 3
Connect part from STEP 2 & Side frame (D) with Bolt (3)
STEP 4
Put on Seat cushion (T), Back cushion (P) & Small back cushion (Q) to complete right bench
50%
100%
4 pcs
3
x2
x1x1
P
T

E
F
G
1
1
1
2
2
2
2
2
23
STEP 5
Connect Left frame (E) & Left back frame (F) with Bolt (1)
STEP 6
Connect part from STEP 5 & Left seat frame (G) with Bolt (2) & (3)
50%
50%
3 pcs
1
6 pcs
2
1 pc
3
x1
x1

D
3
3
33
STEP 7
Connect part from STEP 6 & Side frame (D) with Bolt (3)
STEP 8
50%
100%
4 pcs
3
x1
x1
T
P
Put on Seat cushion (T), Back pillow (P) to complete left bench

I
H
L
L
2
2
44
44
44
44
STEP 9
Connect Table top (I) & (H) with Bolt (2)
STEP 10
Connect part from STEP 9 & Table leg frame (L) with Bolt (4)
50%
50%
2 pcs
1
8 pcs
4
x1
x1