FujiFilm Revoria Press SC180 User manual

Reference Guide
Main Unit
Revoria Press SC180
Revoria Press SC170
April 2023 GM1778E2-1 Edition 1
FUJIFILM Business Innovation Corp.

21 Preface
1Preface
A guide describing the basic operations, maintenance and precautions for use of the main unit.
In this manual, safety instructions are preceded by the symbol . Always read and follow the
instructions before performing the required procedures.
As the copying device contains a feature designed to prevent forging of certain documents, there
may be rare instances where copies or scanned images do not achieve the desired results.
If a malfunction occurs with the machine's storage media, any received or stored data including
registered configurations may be lost. Our company is not responsible for any direct or indirect
damages arising from or caused by such data loss.
Our company is not responsible for any breakdown of machines due to infection of computer virus
or computer hacking.
When you use a reflective projector to project transparencies printed in color onto a screen, the
projected images may appear darker. This problem can be resolved by using a projector with
higher brightness levels.
The printed image may fade or peel off due to moisture caused by water, rain or vapor. For more
information, contact your local representative.
Trademark
Microsoft, Active Directory, Azure, Windows, Windows Server, and Wingdings are registered
trademarks of US Microsoft Corporation in the U.S. and other countries.
App Store, Bonjour, and OS X are trademarks of Apple Inc., registered in the U.S. and other countries.
IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under
license.
This product uses eT-Kernel. eT-Kernel is a trademark of eSOL Co., Ltd. in Japan and other countries.
Other company names or product names are registered trademarks or trademarks of each company.
FUJIFILM and FUJIFILM logo are registered trademarks or trademarks of FUJIFILM Corporation.
Revoria, Revoria logo, and Revoria Press are registered trademarks or trademarks of FUJIFILM
Business Innovation Corp.
Microsoft product screen shots reprinted with permission from Microsoft Corporation.
This manual may not be edited, modified or copied in whole or part without the written consent
of the publisher.
Some parts of this manual are subject to change without prior notice.
The screen shots and the illustrations in this manual are used as examples. They may differ from
yours depending on the model, the software, or the OS.

3
Notations in Manual
The following symbols are used in this manual.
“Long” paper is paper of which length is 488 mm or more.
There are two paper loading directions: LEF and SEF.
The width, length, front edge, rear edge, top, and bottom of paper indicate the following positions.
(For the High Capacity Feeder and Paper Tray 5 (Bypass), the feeding direction is opposite.)
Some functions mentioned in this manual may not be used according to the model and installed
optional units.
“WSD” stands for “Web Services on Devices”.
“XPS” stands for “XML Paper Specification”.
Indicates important information you have to know or be reminded before
operations.
Indicates supplemental information useful for operations.
Indicates reference destinations.
“ ” Names and inputs of folders, files, apps, and functions. Also reference pages of the
manual.
< > Keys of the keyboard, buttons and lamps of the optional units.
[ ] Tab names, item names, button names, menu names, and file names on the printer
operation screen.
> The display order on the control panel. It is used as [Item name] > [Item name].
“ ” A manual to be referenced.
LEF
Short side: Length, Long side: Width
SEF
Long side: Length, Short side: Width
Important
Note
Refer
Tray
The front of this product
Length
Width
Feed direction
Bottom
Top
Front edge
Rear edge
Tray
The front of this product
Length
Width
Feed direction
Bottom
Top
Front edge
Rear edge

42 Before Using the Machine
2Before Using the
Machine
2.1 Device Components
Front
No. Component Function
1 Document Cover Holds a document in place.
2 Document Glass Load a document here.
3 USB memory slot A USB memory stick can be connected to copy and move data. Insert a
USB memory device directly here.
Note
A memory card reader or a USB memory device cannot be
connected to the USB memory slot with a USB cable. Note that the
machine will not recognize the memory on a memory card reader
or a memory device connected to a USB interface connector on the
rear side of the machine when a USB memory device is already
inserted in the USB memory slot.
1 3
5
4
6
7
810 9
11
12
2
13

5
2.1 Device Components
Left Side and Rear
4 Paper Clip Tray Used for placing paper clips and staples.
5 Toner Cover Open this cover to replace toner.
6 Front Cover Open this cover to clear paper jams or replace the consumables.
7Waste Toner
Container Cover
Open this cover to replace the Waste Toner Container.
8 Paper Trays 1, 2, 3 Load paper here.
9 Locking casters Used to move this machine.
10 Lower Left Cover Open this cover to clear paper jams.
11 Paper Tray 5
(Bypass)
Used for loading non-standard paper that cannot be loaded in Trays 1,
2, 3
12 Paper Tray 5
(Bypass) Top Cover
Open this cover to clear paper jams.
13 Control panel Consists of operation buttons, LED indicators, and a touch screen.
No. Component Function
1 Earth leakage
breaker
Automatically turns the machine off when a current leakage is
detected.
2 Test Button This button is used to check if the earth leakage breaker operates
correctly.
Refer
Refer to the "User's Manual" for details on how to check the
breaker operation.
3 USB 2.0 interface
connector
Connects to a memory card reader, an optional component or a
peripheral with a USB cable.
No. Component Function
6
4
5
3
1
2

62 Before Using the Machine
LAN connection
When connecting to the network port, keep the machine power switched off.
Note
When a connection failure occurs, it may be improved by setting [Disabled] in > [Settings] > [Network
Settings] > [Protocol Settings] > [Ethernet Settings]> [Energy Efficient Ethernet] in the System
Administrator mode.
USB connection
When connecting to a USB connector, keep the machine power switched off.
Inside
4 USB 3.0 interface
connector
Connects to a USB cable for printing.
5Network Port
(optional)
Connects to a network cable.
6 EP interface Used for connecting related products such as Attention Light II and
Attention Light.
No. Component Function
1 Main power switch Switches the main power of the machine on and off. Always follow the
instructions by the system administrator.
Note
Always switch the power off before switching the main power off.
2 Offset Catch Tray
(optional)
Outputs are delivered here.
3 Ground fault
interrupter
Automatically turns the machine off when a current leakage is
detected.
No. Component Function
1
2
3
4
5
68710
11
9

7
2.1 Device Components
Control Panel
Refer
For Control Panel, refer to the “Reference Guide - Operations”.
4 Bottom right door Open this door to clear paper jams.
5Waste toner
container door
Open this door to replace the waste toner container.
6Waste Toner
Container
Collects waste toner.
7 Decurler (handle
[2b])
Flattens curled paper. Open this decurler when clearing paper jams.
8 Fusing Unit Fuses toner on paper.
9 Handle Used to pull out the Transfer Unit.
10 Transfer Unit Transfers toner images on the drum to paper.
11 Toner Cartridge Contains the toner (image forming powder).
No. Component Function
1 Power Button The power switches on.
Note
When “Please wait...” is displayed, the machine is warming up.
The use of machine is not available during this time.
If the power does not switch on, confirm that the Reset button is
in the reset position (button is pushed in) and the power plug is
connected.
2 Home Button Pressing this button displays the Home screen.
Note
When the Home button is pressed, the settings of all applications
in operation are reset.
3 Touch Panel Display Displays messages required for operation, and buttons for various
features.
4 Status Display
Indicator
The indicator lights up in green at an instant of operation reception.
When an error occurs, the lamp blinks in orange.
No. Component Function
12 3
456

82 Before Using the Machine
2.2 Print Area
Image Loss Width (mm)
There is an unprintable area (image loss area) along all four edges of the paper.
The image loss widths are 4.0 mm at the lead edge, 2.0 mm at the trail edge, 2.0 mm at the top edge,
and 2.0 mm at the bottom edge.
Assured Image Area (mm)
The following are the areas for which the image quality is guaranteed.
Image Printable Area (mm)
5 Data Indicator This indicator blinks while data is being sent from the machine or data
is being received from the client computer.
Also, it lights up when documents are stored in the machine.
6 NFC touch area This is an area for you to hold up your NFC-supported mobile devices
over. To communicate interactively, the NFC function of this machine
needs to be enabled.
A3 or smaller Area excluding an image loss area along all four edges
of the paper.
Larger than A3 Copying Max: 293 x 426
Printing Max: 317 x 482
Max 323 x 482
Long paper Max: 323 x 1,194
No. Component Function

9
2.3 Paper
Except for the long paper tray
2.3 Paper
Recommended Paper
Standard paper
To use paper other than the above, contact your local representative.
Unusable paper
Avoid using the following paper to prevent machine malfunction.
There are more types of unusable paper other than the above. For details, contact your local
representative.
Paper name Paper type setting for paper tray Paper weight (g/m2)
J paper Uncoated 82
Colotech Plus Uncoated 90
OS Coat W Coated 127
Colotech Plus Gloss Coat Coated 120
Paper using ink that deteriorates with fusing
heat
Damp paper, damp and wavy paper
Ink jet printer paper Paper with 12 mm or greater curl
Business card size paper Thermal paper, heat-transfer paper
Wrinkled or folded paper Envelopes with windows
bottom 3.5 mm
317 mm
Top 3.5 mm 6.5mm
Image Printable AreaImage Printable AreaImage Printable Area
Assured Image AreaAssured Image AreaAssured Image Area
Feed Direction
6.5 mm
488 mm
482 mm
Rear edge 2 mm Front edge 4 mm
320 mm
323 mm

10 2 Before Using the Machine
Usable paper types
O: Guaranteed paper handling capability
X: Paper handling capability is not guaranteed
-: Cannot input paper basis weight
A: Paper handling capability is guaranteed only for the Bypass Tray (5), High Capacity Feeder C3-DS/2nd High
Capacity Feeder C1-DS/Chained Air Suction Feeder C1-DS/Air Suction Feeder C1-DS (Trays 6 to 9), High
Capacity Feeder B1-S (Tray 6), and Lining board/Cover Tray (T1).
B: Paper handling capability is guaranteed only for the High Capacity Feeder C3-DS/2nd High Capacity Feeder
C1-DS/Chained Air Suction Feeder C1-DS/Air Suction Feeder C1-DS (Trays 6 to 9), and Lining board/Cover
Tray (T1).
C: Paper handling capability is guaranteed only for the Bypass Tray (5), High Capacity Feeder C3-DS/2nd High
Capacity Feeder C1-DS/Chained Air Suction Feeder C1-DS/Air Suction Feeder C1-DS (Trays 6 to 9), and High
Capacity Feeder B1-S (Tray 6).
D: Paper handling capability is guaranteed only for the Chained Air Suction Feeder C1-DS/Air Suction Feeder
C1-DS (Trays 6 to 9).
E: Paper handling capability is guaranteed only for the Bypass Tray (5) and High Capacity Feeder C3-DS/2nd
High Capacity Feeder C1-DS/Chained Air Suction Feeder C1-DS/Air Suction Feeder C1-DS (Trays 6 to 9).
*1 Except for the High Capacity Feeder, Chained Air Suction Feeder C1-DS, and Air Suction Feeder C1-DS, only
one sheet should be loaded. Image quality and paper handling capability are not guaranteed when multiple
sheets are loaded.
*2 Excluding the High Capacity Feeder B1
*3 Only 72 g/m2 and up
*4 Excluding the Lining board/Cover Tray
*5 72 g/m2 and up except for the Bypass Tray (5)
*6 Bypass Tray (5) 129 g/m2 and up only
*7 Paper handling capability is guaranteed for the Lining board/Cover Tray.
Paper Type Basis Weight Selection Group (Unit: gsm)
52-63 64-80 81-90 91-105 106-135 136-157
Uncoated A O O O O O
Uncoated Reload A O O O O O
Coated*1 XO*3 OOOO
Coated Reload*1 XO*3 OOOO
Punched AAAAOO
Recycled X O O O X X
Transparency*2 -
Labels*4 XXXXOO
Precut Tab (Embossed)*7 X*7 X*7 X*7 O*2 O*2 O*2
Postcard*4 XXXXCC
Adhesive -E
Cast Coated*1 XO*5 OOOO
Mat Coated*1 XO*3 OOOO
Embossed*1 XXXXOO
Tab Stock (Embossed)*1 XXXX
O*2 O*2
Film*4 XO*3 OOOO
Transfer Paper*4 XXXX
O*6 O*6

11
2.3 Paper
O: Guaranteed paper handling capability
X: Paper handling capability is not guaranteed
-: Cannot input paper basis weight
A: Paper handling capability is guaranteed only for the Bypass Tray (5), High Capacity Feeder C3-DS/2nd High
Capacity Feeder C1-DS/Chained Air Suction Feeder C1-DS/Air Suction Feeder C1-DS (Trays 6 to 9), High
Capacity Feeder B1-S (Tray 6), and Lining board/Cover Tray (T1).
B: Paper handling capability is guaranteed only for the High Capacity Feeder C3-DS/2nd High Capacity Feeder
C1-DS/Chained Air Suction Feeder C1-DS/Air Suction Feeder C1-DS (Trays 6 to 9), and Lining board/Cover
Tray (T1).
C: Paper handling capability is guaranteed only for the Bypass Tray (5), High Capacity Feeder C3-DS/2nd High
Capacity Feeder C1-DS/Chained Air Suction Feeder C1-DS/Air Suction Feeder C1-DS (Trays 6 to 9), and High
Capacity Feeder B1-S (Tray 6).
D: Paper handling capability is guaranteed only for the Chained Air Suction Feeder C1-DS/Air Suction Feeder
C1-DS (Trays 6 to 9).
E: Paper handling capability is guaranteed only for the Bypass Tray (5) and High Capacity Feeder C3-DS/2nd
High Capacity Feeder C1-DS/Chained Air Suction Feeder C1-DS/Air Suction Feeder C1-DS (Trays 6 to 9).
*1 Except for the High Capacity Feeder, Chained Air Suction Feeder C1-DS, and Air Suction Feeder C1-DS, only
one sheet should be loaded. Image quality and paper handling capability are not guaranteed when multiple
sheets are loaded.
*2 Excluding the High Capacity Feeder B1
*3 Only 72 g/m2 and up
*4 Excluding the Lining board/Cover Tray
*5 72 g/m2 and up except for the Bypass Tray (5)
*6 Bypass Tray (5) 129 g/m2 and up only
*7 Paper handling capability is guaranteed for the Lining board/Cover Tray.
Paper Type Basis Weight Selection Group (Unit: gsm)
158-176 177-220 221-256 257-300 301-350 351-400
Uncoated O O O*2 ABD
Uncoated Reload O O O*2 ABD
Coated*1 OO
O*2 ABD
Coated Reload*1 OO
O*2 ABD
Punched O O O*2 ABD
Recycled XXXXXX
Transparency*2 -
Labels*4 OO
O*2 CBD
Precut Tab (Embossed)*7 O*2 O*2 ABDD
Postcard*4 CCCCBD
Adhesive -E
Cast Coated*1 OOCABD
Mat Coated*1 OOCABD
Embossed*1 OOCABD
Tab Stock (Embossed)*1 O*2 O*2 O*2 ABD
Film*4 OOCABD
Transfer Paper*4 O*6 XXXXX

12 2 Before Using the Machine
Important
Printing with paper that is different from the paper size or paper type selected in the printer driver or Print
Server, or printing with paper loaded in an unsuitable paper tray, may cause paper jams. Select the correct
paper size, paper type, and paper tray for proper printing.
Note
Metric basis weight is the mass of one sheet of paper of 1 m2.
Ream weight is the mass of 1,000 sheets of paper, such as paper in a duodecimo (788 x 1,091 mm)
format.
When printing on postcards, use Japanese postcards. To load postcards into the optional high capacity
feeder, the postcard loading guide is required.
Storing and Handling Paper
Storing paper
Follow the guidelines below since paper is susceptible to moisture in the air and easily deformed by
impacts.
Store paper in a place of low humidity. Paper that has absorbed moisture can create paper jams or
poor image quality.
Using paper stored in a low-temperature environment may cause fusing failures. Storing paper in
an environment where the temperature is 16°C or higher is recommended.
Coated paper stored in a high-temperature, high-humidity environment may cause misfeeding or
double-feeding.
After opening a package of paper, seal and store the remaining paper in a moisture-proof wrapper
or a reclosable plastic bag.
To prevent bending or warping, store paper flat. Do not store it upright.
Do not store paper under direct sunlight.
Handling paper
Do not use collected pieces of paper.
Do not use wrinkled or folded paper.
Do not load paper of different sizes or types in the same tray.
Before loading paper into the tray, fan a stack of paper well to prevent paper jams and double-
feeding (multiple sheets of paper are being fed simultaneously) of transparency films, films and
coated paper.

13
3.1 Loading Paper
3Basic Operations of the
Machine
3.1 Loading Paper
After loading paper, configure the Paper Tray settings on the Home screen.
Important
Do not place paper or other objects in the reserved space of the tray. It may cause paper jams or machine
malfunction.
Note
While the printer is processing a job, do not remove the Paper Tray used for the job.
 Before loading the paper into the Paper Tray, fan a stack of paper well. This will separate the sheets, and
it can prevent paper jamming.
It is recommended to use our recommended papers. Print may not be done correctly according to the use
conditions.
Refer
For details, refer to “Setup” in “Reference Guide - Operations”.
Paper Trays 1 to 3
The paper feeding method is the same for Paper Trays 1 (top tray) through 3 (third tray).
The bottom face of loaded paper is the surface printed on.
Loadable
1. Pull out the Paper Tray until it stops.
2. When paper is already loaded in the tray, take out the paper.
Paper size (mm) Standard size Max A3, 11 x 17", Min A5
Custom size 140 x 182 mm to 330 x 488 mm
Paper weight (g/m2)Single side printing 64 to 256
Maximum number of sheets (sheets) (90 g/m2 paper) 550 x 3 Trays

14 3 Basic Operations of the Machine
3. Pinch the two Guide Clips, and adjust to the correct paper
size.
4. Fan a stack of paper, face the print surface down, and then
load the paper with edges aligned according to the direction
of the arrow.
Important
Do not load paper above the maximum fill line. It may cause
paper jams or machine malfunction.
Note
Adjust the guide correctly to the paper size. If the guide is not
adjusted correctly, the machine cannot feed the paper properly,
resulting in paper jams.
5. Push in the Paper Tray.
Setting special paper and other media
Hole punched paper
Paper orientation: Load paper with holes facing the left side when viewed from the front of the
machine
Postcards
Paper orientation: SEF
Envelopes
Paper orientation when the flaps are open: Flaps come at the right when viewed from the front of the
machine
Paper orientation when the flaps are closed: Flaps come at the left when viewed from the front of the
machine
Note
Load envelopes with glue or seal as the flap is closed.

15
3.1 Loading Paper
Paper Tray 5 (Bypass)
The Paper Tray 5 (Bypass) allows you to use a variety of paper sizes and types that cannot be used in
Paper Trays 1 to 3.
The top face of loaded paper is the surface printed on.
Loadable paper
1. Open the Paper Tray.
2. Fan a stack of paper, face the print surface up, and insert the
paper gently along the Paper Guide until it stops.
Important
Do not set documents above the maximum fill line. It may cause
paper jams or machine malfunction.
3. Pinch the lock to slide the Paper Guide to the correct paper
size.
Important
After adjusting it to the paper size, turn the four metal fittings of
the Paper Guide to fix the Paper Guide in place.
Setting special paper and other media
Hole punched paper
Paper orientation: Load paper with holes facing the right side when viewed from the front of the
machine
Paper size (mm) Standard size Max A3, 11 x 17", Min A6
Custom size 98 x 148 mm to 330 x 1,200 mm
Paper weight (g/m2)Single side printing 52 to 300
Note
When long paper is used,
it is 52 to 220 g/m2
Maximum number of sheets (sheets)(80 g/m2 paper) 250

16 3 Basic Operations of the Machine
Postcards
Paper orientation: SEF
Envelopes
Paper orientation when the flaps are open: Flaps come at the left when viewed from the front of the
machine
Paper orientation when the flaps are closed: Flaps come at the front or right when viewed from the
front of the machine.
Note
Load envelopes with glue or seal as the flap is closed.
The loadable envelope size is up to 428 mm for the length.
Long paper
Load paper one sheet at a time.
Using an optional Long Paper Bypass Tray and Long Paper Inserter prevents skewed feeding and the
paper from falling.
Refer
For loading paper on the Long Paper Bypass Tray, refer to “3 High Capacity Feeder B1-S/C3-DS/C1-DS” of
“Reference Guide - Optional Units”.
3.2 Loading Documents
Document Feeder
Loadable paper
1. Open the Document Cover.
2. Wipe off any dirt adhering to the glass strip and white plastic
area located in the left side of the Document Glass.
3. Close the Document Cover.
4. Confirm that the document is free of tag paper, adhesive
tape, staples, and clips, and stretch out the document if it is
wrinkled or folded.
5. Align the upper left corner of the document so that the
original size is correctly detected.
Paper size Max A3, 11 x 17"
Min A6
Custom size 84 x 139.7 mm to 297 x 432 mm
Paper weight (g/m2)Single side printing 38 to 200
Double side printing 50 to 200
Maximum number of sheets (sheets) (80 g/m2 paper) 250

17
3.2 Loading Documents
6. Load the document face up (when the document is 2-sided,
place the front side up) in the center of Document Feeder.
Important
Do not set documents above the maximum fill line. It may cause
paper jams or machine malfunction.
7. When the confirmation indicator lights up, move the
document guide to align with both edges of the document.
8. Open the Document Stopper.
Note
To prevent a document from being left behind, “Document
Feeder Attention Light” is turned on after the Scan job is
completed and turned off after approx. 3 sec.
Document Glass
Loadable paper
1. Open the Document Cover, and wipe off any dirt from the
Document Glass.
2. Load the document face down with the document aligned
with the upper left corner of the Document Glass.
3. Close the Document Cover.
Paper size (mm) Width Up to 297
Length Up to 432
Document Feeder
Attention Light

18 3 Basic Operations of the Machine
3.3 Outputting Paper
Print Surface
The print surface refers to the surface printed on in single-sided printing (the first page in double-
sided printing).
For the front side printing, the paper is output to the tray with the print side up, and for the rear side
printing, the paper is output to the tray with the print side down.
Long paper
Tray capacity
A4 paper
Papers other than A4
Important
When paper exceeding the tray capacity is loaded, the Extension Tray may get broken.
Single-sided printing
(front side output)
Double-sided printing/
upside down output
(back side output)
Paper size (mm) Width 98 to 330 98 to 330
Length 148 to 488 148 to 488
Paper Weight (g/m2)52 to 256 52 to 256
Note
For trays 1 to 3. When tray 5 (manual feed) is used,
it is 52-300 g/m2.
Single-sided printing Double-sided printing
Paper size (mm) More than 488 to 1,200 More than 488 to 864
Paper weight
(g/m2)
Uncoated Up to 660 mm: 52 to 350
Up to 864 mm: 52 to 300
Up to 1,200 mm: 52 to 256
Coated Up to 660 mm: 52 to 350
Up to 864 mm: 52 to 300
Up to 1,200 mm: 52 to 256
Long Catch Tray 300 sheets
Offset Catch Tray 500 sheets
Long Catch Tray Paper size: Up to 488 mm 300 sheets
Paper size: 489 to 864 mm 100 sheets
Paper size: More than 864 mm 10 sheets

19
3.3 Outputting Paper
Note
The tray capacity varies depending on the following conditions.
- Paper size, paper weight
- Paper types (coated paper or uncoated paper, paper curl height, etc.)
- Single-sided prints / double-sided prints
-Image density
Extension Tray
Insert 2 extension trays until they stop.
Note
Pass them through over the guide at the rear side of the tray until
they stop.
Thin paper loading wire
When it is difficult to load thin paper, install the wire.
Note
The tray capacity is 10 sheets.
Paper of which width is 256 mm or less cannot be used.
The supported paper weights are from 82 to 209 g/m2.
1. Install the wires on the extension tray.
Note
As holding the extension tray with a hand, insert the fixing
devices firmly, and check that the wires will not come off from the
extension tray.
2. Adjust the wire positions as aligning the wires with the “”
marks.
When not using the kit
Hang the kit on the holder at the side.

20 3 Basic Operations of the Machine
Offset
Note
This function is available only for the Offset Catch Tray. Offset cannot be performed on the Long Catch
Tray.
The paper is output with offset stacking for easy separation.
Use the printer driver to set the offset of outputs.
Catch Tray Fan
The catch tray fan is equipped with a knob to adjust the airflow volume. Adjusting the airflow volume
according to the paper volume to be output to the tray can prevent sheets from sticking each other.
Leave the scale to “0” when papers do not stick each other.
Airflow Setting
Note
 In high temperature environment or when a large volume of papers is output to the tray, papers are likely
to stick each other. Increase the airflow volume by turning the knob to the right by 1 to 2 scales.
When papers stick each other even if the airflow volume is increased, keep the number of papers on the
Top Output Tray less than 50 sheets.
Even if paper larger than A4 is used, when output papers heavily stick each other, set the airflow volume
for A4 or smaller papers.
Paper size (mm) Width 170.1 to 297
Length 148 to 488
Paper weight (g/m2)52 to 300
Airflow
volume
None Low Medium High
Memory 03610
Knob
Larger than A4 Smaller than A4
Paper weight (g/m2)All 60 to 105 106 to
128
129 to
150
151 or
greater
Memory When paper amount
is small
0 03610
When paper amount
is large (100 sheets or
more)
0 361010