Fujitsu 560H SERIES User manual

1
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
MEMORY CARD CONNECTORS
(PCMCIA CONFORMABLE)
560H SERIES
■FEATURES
• The connectors conform to the Japan Electronic Industry
Development Association (JEIDA) and Personal
Computer Memory Card International Association
(PCMCIA) standards Ver. 4.
• Contact pitch of 1.27 mm (0.050 in.) x 1.27 mm (0.050 in.).
Incorrect insertion is prevented. Hot system plugging is
possible (contact detection).
• Plugs have an easy-to-use ejection mechanism.
• Raised mounting type connectors (under which
components can be mounted) and low-profile connectors
are available.
• In addition to connectors for type I and type II cards, a
connector for type III cards has been provided.
• The sockets are of the SMT type. A straddle-type socket for double-sided mounting and a socket for single-sided
mounting are available.
■PIN CONNECTOR (PLUG) CONTACT LENGTH
■SPECIFICATIONS
Item
Operating temperature range
Current rating
Voltage rating
Contact resistance
Insulation resistance
Dielectric withstanding voltage
Insertion/withdrawal life
Specification
– 55°C to + 85°C
DC 0.5 A
AC 250 V
40 mΩmax (6 VDC, 0.1 A)
1000 MΩmin. (500 VDC)
500 VAC for 1 minute
Industrial environment: 5,000 times
Office environment: 10,000 times
Contact type
Power, ground pins
Card detection pins
Other signal pins
Pin No.
1, 17, 34, 35, 51, 68
36, 67
Others
Contact length
5.0 mm (0.196 in.)
3.5 mm (0.137 in.)
4.25 mm (0.167 in.)
■MATERIALS
Plug body: PPS resin UL94V-0
: 6T nylon (for type III card connector) UL94V-0
Ejector: Polyester
:
PPS resin (for SMT and type III card connectors)
Copper alloy
Contact: Gold over palladium over nickel
(PAGOS)
Terminal: Palladium
Specification
Item
Insulating material
Conductor
Plating

560HSeriesConnectorConforming toVer. 4
2
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
■ORDERING PART NUMBER [PLUG]
V4: Conforms to Ver.4
E4: Conforms to Ver.4 and anti-ESD
Specification
Plating G: Gold plating
Number of contacts: 68, 136
Body P: Plug
Pin type 4: Straight
5: Right-angle
8: SMT
560 series connector
Fujitsu connector
FCN-56 5 P 068-G / XC-V4
■ORDERING PART NUMBER [SOCKET]
FCN-56 8 J 068-G / 0
Terminal type 0: PC board double-sided straddle type
B:
PC board single-sided mounting type
Plating G: Gold plating
Number of contacts: 68
Body J: Socket
Pin type 8: SMT
560 series connector
Fujitsu connector

560HSeries ConnectorConforming toVer. 4
3
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
RIGHT-ANGLE PLUG, THROUGH HOLE TYPE (WITH NO EJECTOR, STANDARD TYPE)
SUPPORTS TYPE I, II CARDS
■DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE ((
((
(WITH NO EJECTOR, LOW-PROFILE TYPE))
))
)
SUPPORTS TYPE I, II CARDS
■DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Unit: mm (in.)
Part number: FCN-565P068-G/C-V4
3
(0.118) 4
(0.157)
1.51 (0.059)
1.905 (0.075)
3.810 (0.15)
5.715 (0.225)
50.8 (2)
1.27 (0.05) ×(34-1) = 41.91 (1.65)
1.27 (0.05)
3
(0.118) 42 (1.65)
12.2 (0.48)
58.7 (2.31)
24.9 (0.98)
1.27 (0.05)
1.27 (0.05)
1.27 (0.05) ×(34-1) = 41.91 (1.65)
No.1
No.35 No.68
No.34
2- ø 2.8 (0.11)
2.5mm (0.098)
deep spot facing
3.6 (0.141)
Part number: FCN-565P068-G/01-V4
• Models with a board lock (metal fitting for direct mounting) are also available. Part number: FCN-565P068-G/12-V4 (for 1.2 mm (0.047 in.) to 1.6 mm (0.063 in.) thick PC board)
FCN-565P068-G/08-V4 (for 1.0 mm (0.039 in.) thick PC board)
• Long-terminal models are also available. Part number: FCN-565P068-G/13-V4 (4 mm (0.157 in.))
FCN-565P068-G/02-V4 (10 mm (0.394 in.))
• Models which support Type III are also available. Part number: FCN-565P068-G/17-V4
FCN-565P068-G/18-V4 (with board lock, for 1.2 mm (0.047 in.) to 1.6 mm
(0.063 in.) thick PC board )
Unit: mm (in.)
50.8 (2)
0.51 (0.02)
1.905 (0.075)
3.810 (0.15)
5.715 (0.225)
7 (0.276)
3 (0.118)
11.2 (0.44)
5 (0.197) 1 (0.039)
4.25 (0.167)
3.5 (0.138)
2- ø 2.8 (0.110)
41.91 (1.65)1.27 (0.05)
59.7(2.35)
2.42 (0.095)
35.2 (1.39)
2.5mm (0.098)
deep spot facing
41.91 (1.65)
1.27 (0.05)
No.17
No.51 No.34
No.68
No.35
No.1
1.27 (0.05)
4 (0.157)
50.8 (2)
±0.1 (0.0039)
41.91 (1.65)
±0.1 (0.0039)
1.27 (0.05)
±0.05 (0.0020)
No.3
No.1
No.2
5.715 (0.225)
±0.05 (0.0020)
3.810 (0.15)
±0.05 (0.0020)
1.905 (0.075)
±0.05 (0.0020)
No.68
2- ø 2.8 (0.110)
±0.1 (0.0039)
68- ø 1 (0.039)
±0.05 (0.0020)
(Card insertion side)
50.8 (2) ±0.1 (0.0039)
41.91(1.65)±0.1 (0.0039)
1.27 (0.05)±0.05 (0.0020)
No.3
No.1
No.2
5.715 (0.225) ±0.05 (0.0020)
3.810 (0.15) ±0.05 (0.0020)
1.905 (0.075) ±0.05 (0.0020) No.68
2- ø 2.8 (0.110)
±0.1 (0.0039)
68- ø 1 (0.039)
±0.05 (0.0020)
(Card insertion side)
Use M2.5 (0.098 in) nut and screws. Screw torque is 3.2 kg/cm.
In order to avoid damage to the connector, do not pull out the card at an angle.

560HSeries ConnectorConforming toVer. 4
4
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
0.51 (0.059)
3 (0.118)
1.905 (0.075) 3.810 (0.15)
5.715 (0.225)
6 (0.236)
8 (0.315)
7 (0.276)
4.5 (0.177)
2.42 (0.095)
35.2 (1.385)
11.2 (0.441)
59.7 (2.35)
50.8 (2)
2- ø 2.2 (0.0866)
1.27 (0.05) × (34 – 1) = 41.91 (1.65)
1.27 (0.05)
No.1 No.17
No.35 No.51
No.34
No.68
1.27 (0.05)
53.7 (2.114)
8.5
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, TO BE MOUNTED ON
THE BACK OF THE PC BOARD) SUPPORTS TYPE I, II CARDS
■DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, RAISED MOUNTING
TYPE) SUPPORTS TYPE I, II CARDS
■DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Unit: mm (in.)
Part number: FCN-565P068-G/F-V4
Part number: FCN-565P068-G/J-V4 (SUPPORTS TYPE I, II CARD)
Part number: FCN-565P068-G/J-4V (SUPPORTS TYPE I, II, III CARD)
7 (0.276)2.5
(0.098)
1 (0.039)
5.715 (0.225)
3.810 (0.15) 1.905 (0.075)
0.51 (0.059)
2.42 (0.095)
35.2 (1.385)
11.2 (0.441)
59.7 (2.35)
50.8 (2)
1.27 (0.05)
1.27 (0.05) × (34 – 1) = 41.91 (1.65)
(2) M2.5 (0.098 in.)
thread nut
1.27 (0.05) × (34 – 1) = 41.91 (1.65)
1.27 (0.05)
1.27 (0.05)
No.68 No.51 No.35
No.1No.17No.34
4(0.157)
Unit: mm (in.)
• A model with no nuts buried is available. Part number: FCN-565P068-G/H-V4
• Applicable screw: Self-tapping screw M2.5 (0.098 in.) x 5 mm (0.197 in.) (for 1.6 mm (0.063 in.) thick PC board)
• A model mounted on bottom of a PC board is also available. Part number: FCN-565P068-G16-V4 (supports type I, II)
50.8 (2)
±0.05 (0.0039)
1.27 (0.05) × (68/2-1) =
41.91 (1.65)
±0.1 (0.0039)
1.27 (0.05)
±0.05 (0.0020)
No.34
No.68
5.715 (0.225)
±0.05 (0.0020)
3.810 (0.15)
±0.05 (0.0020)
1.905 (0.075)
±0.05 (0.0020)
No.35
68- ø 1 (0.039)
±0.05 (0.0020)
(Card insertion side)
2- ø 2.8 (0.110)
±0.1 (0.0039)
<To be mounted on back of PC board>
No.1
50.8 (2)
±0.1 (0.0039)
41.91 (1.65)
±0.1 (0.0039)
1.27 (0.05)
±0.05 (0.0020)
No.3
No.1
No.2
5.715 (0.225)
±0.05 (0.0020)
3.810 (0.15)
±0.05 (0.0020)
1.905 (0.075)
±0.05 (0.0020)
No.68
2- ø 2.8 (0.110)
±0.1 (0.0039)
68- ø 1 (0.039)
±0.05 (0.0020)
(Card insertion side)

560HSeries ConnectorConforming toVer. 4
5
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, SUNK MOUNTING TYPE)
SUPPORTS TYPE I, II CARDS
■DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Unit: mm (in.)
Part number: FCN-565P068-G/A-V4
3 (0.118) 4.5 (0.177)
1.905 (0.075)
3.810 (0.15)
5.715 (0.225)
6 (0.236)
11.2 (0.441)
50.8 (2)
1.27 (0.05) × (34–1) = 41.91 (1.65)
1.27 (0.05)
59.7 (2.35)
2.42 (0.095)
35.2 (1.39)
2- ø 2.8 (0.110)
1.27 (0.05) × (34–1) = 41.91 (1.65)
1.27 (0.05)
1.27 (0.05)
3 (0.118)
No.1 No.17 No.34
No.68No.51No.35
2.5mm (0.098)
deep spot facing
5.715 (0.225)
±0.05 (0.0020)
3.810 (0.15)
±0.05 (0.0020)
1.905 (0.075)
±0.05 (0.0020)
2- ø 2.8 (0.110)
±0.1 (0.0039)
68- ø 1 (0.039)
±0.05 (0.0020)
1.27 (0.05)
50.8 (2)
±0.1 (0.0039)
±0.05 (0.0020)
1.27 (0.05) × (68/2-1) =
41.91 (1.65)
±0.1 (0.0039)
No.35
No.1
No.68
No.34
6.7 (0.264)
±0
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, TWO LAYER STACK TYPE)
■DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Unit: mm (in.)
Part number: FCN-565P136-G/0-V4
7
(0.276) 7 (0.276)
1.905 (0.075)
1.905 (0.075) ×(8-1) = 13.335 (0.525)
35.2 (1.39)
11.2 (0.441)
2.42 (0.095)
59.7 (2.35)
50.8 (2)
11 (0.433)
3
(0.118)
4 (0.157)
No.35
No.1
No.35 No.1
No.34
No.68
No.34
No.68
1.905 (0.075)
±0.05 (0.0020)
No.35
No.1
1.905 (0.075) × (8-1) = 13.335 (0.525)
No.1
No.35
±0.1 (0.0039)
50.8 (2)
1.27 (0.05) × (68/2-1)
= 41.91 (1.65)
±0.1 (0.0039)
1.27 (0.05)
±0.05 (0.0020)
No.34
No.68
No.34
No.68
±0.05 (0.0020)
2- ø 2.8 (0.110)
±0.1 (0.0039)
136- ø 1 (0.039)
±0.05 (0.0020)

560HSeries ConnectorConforming toVer. 4
6
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, WITH GUIDE)
SUPPORTS TYPE I, II CARDS
■DIMENSIONS
Part number: FCN-565P068-G/C34-V4
*A 60.48 mm (2.381 in.) model is also available. FCN-565P068-G/C32-V4
Unit: mm (in.)
■PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Unit: mm (in.)
50.8 (2) ±0.1 (0.0039)
1.27 (0.05) × (68/2-1)
= 41.91 (1.65) ±0.1 (0.0039)
1.27 (0.05) ±0.05 (0.0020)
No.1
No.35
5.715 (0.225)±0.05 (0.0020)
3.810 (0.15) ±0.05 (0.0020)
1.905 (0.075)±0.05 (0.0020) No.68
No.34
2- ø 2.8 (0.110)±0.1 (0.0039)
±0.05 (0.0020)
68- ø 1 (0.039)
0.51 (0.02)
3 (0.118)
1.905 (0.075)
3.810 (0.15) 5.715 (0.225)
7
(0.276) 59.7 (2.35)
50.8 (2)
2- ø 2.8 (0.110)
2.42 (0.095)
35.2 (1.386)
11.2 (0.441)
No.1
No.35
No.34
No.68
7 (0.276)
4 (0.157)
59 (2.32)
2.5mm (0.098)
deep spot facing
83.38 (3.283)*A

560HSeries ConnectorConforming toVer. 4
7
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT-BUTTON EJECTOR)
SUPPORTS TYPE I, II CARDS
■DIMENSIONS
Part number: FCN-565P068-G/XC-V4 (Type I, II Card, Button color: Black)
Part number: FCN-565P068-G/XC-4V (Type I, II, III Card, Button color: Black)
Part number: FCN-565P068-G/PC-V4 (Type I, II Card, Button color: Beige)
7 (0.276)
3 (0.118)
0.51 (0.020) 1.905 (0.075) 3.810 (0.15) 5.715 (0.225)
35.2 (1.386) 2.42 (0.095)
11.2 (0.441)
8 (0.315)
83.38 (3.283)
67.31 (2.65)
59.7 (2.35)
50.8 (2)
34 (1.339)
4.25 (0.167)
3.5
(0.138)
36 (1.417)
40 (1.574)
R 1.4
3.7 (0.146)
10 (0.394)
78.5 (3.091)
59 (2.323) 42 (1.654)
35.5 (1.398)
7 (0.276) 11 (0.433)
4.8 (0.189)
2.1 (0.083)
4 (0.157)
No.1 No.17
No.35 No.51 No.68
No.18 No.34
No.52
ø 2.8 (0.110)
2- ø 2.8 (0.110)
2.5mm (0.098)
deep spot facing
5 (0.197)
A model with an FG accessory for ESD protection is also available. Specify part number FCN-565P068-G/C23-E4,
instead of FCN-565P068-G/XC-V4.
■PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
50.8 (2)
±0.1 (0.0039)
41.91 (1.65)
±0.1 (0.0039)
1.27 (0.05)
±0.05 (0.0020)
No.3
No.1
No.2
5.715 (0.225)
±0.05 (0.0020)
3.810 (0.15)
±0.05 (0.0020)
1.905 (0.075)
±0.05 (0.0020)
No.68
2- ø 2.8 (0.110)
(Card insertion side)
34 (1.339)
±0.05 (0.0020)
67.31 (2.65)~68.0 (2.677)
40 (1.574)
±0.1 (0.0039)
4- ø 2.8 (0.110)
±0.1 (0.0039)
±0.1 (0.0039)
±0.05 (0.0020)
68- ø 1 (0.039)
Unit: mm (in.)
Unit: mm (in.)

560HSeries ConnectorConforming toVer. 4
8
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH LEFT-BUTTON EJECTOR)
SUPPORTS TYPE I, II CARDS
■DIMENSIONS
Part number: FCN-565P068-G/MC-V4 (Button color: Black)
Part number: FCN-565P068-G/C22-V4 (Button color: Beige)
Unit: mm (in.)
7 (0.276)
3 (0.118)
0.51 (0.020)
1.905 (0.075)
3.810 (0.15)
5.715 (0.225)
35.2 (1.386) 2.42 (0.095)
11.2 (0.441)
8 (0.315)
83.38 (3.283)
67.31 (2.65)
59.7 (2.35)
50.8 (2)
34 (1.339)
4.25 (0.167)
3.5
(0.138)
36 (1.417)
40 (1.574)
R 1.4
3.7 (0.146)
10 (0.394) 78.5 (3.091)
59 (2.323)
42 (1.654)
35.5 (1.398)
7 (0.276) 11 (0.433)
4.8 (0.189)
2.1 (0.083)
4 (0.157)
No.1 No.17
No.35 No.51 No.68
No.18 No.34
No.52
2- ø 2.8 (0.110)
2.5mm (0.098)
deep spot facing
5 (0.197)
ø 2.8 (0.110)
■PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Models with an FG accessory ESD protection are also available. Specify part number FCN-565P068-G/KC-E4 instead of
FCN-565P068-G/MC-V4, or specify FCN-565P068-G/C33-E4 instead of FCN-565P068-G/C22-V4.
50.8 (2)
±0.1 (0.0039)
41.91 (1.65)
±0.1 (0.0039)
1.27 (0.05)
±0.05 (0.0020)
No.3
No.1
No.2
5.715 (0.225)
±0.05 (0.0020)
3.810 (0.15)
±0.05 (0.0020)
1.905 (0.075)
±0.05 (0.0020)
No.68
2- ø 2.8 (0.110)
(Card insertion side)
34 (1.339)
±0.05 (0.0020)
67.31 (2.65)~68.0 (2.677)
40 (1.574)
±0.1 (0.0039)
4- ø 2.8 (0.110)
±0.1 (0.0039)
±0.1 (0.0039)
68- ø 1 (0.039)
±0.05 (0.0020)
Unit: mm (in.)

560HSeries ConnectorConforming toVer. 4
9
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT-BUTTON EJECTOR, TO BE
MOUNTED ON THE BACK OF THE PC BOARD) SUPPORTS TYPE I, II CARDS
■DIMENSIONS
Unit: mm (in.)
Part number: FCN-565P068-G/XF-V4 (Button color: Black)
Part number: FCN-565P068-G/PF-V4 (Button color: Beige)
2.5
7 (0.276)
0.51 (0.020) 1.905 (0.075) 3.810 (0.15) 5.715 (0.225)
35.2 (1.386) 2.42 (0.095)
11.2 (0.441)
8 (0.315)
83.38 (3.283)
67.31 (2.65)
59.7 (2.35)
50.8 (2)
34 (1.339)
4.25 (0.167)
3.5
(0.138)
36 (1.417)
40 (1.574)
R 1.4
3.7 (0.146)
10 (0.394)
78.5 (3.091)
4.8 (0.189)
42 (1.654)
35.5 (1.398)
7 (0.276)
1 (0.039)
2.5mm (0.098)
deep spot facing
59 (2.323)
2.1 (0.083)
4 (0.157)
No.68 No.35
No.1No.34
ø 2.8 (0.110)
When a card is ejected
When a card is inserted
5 (0.197)
Unit: mm (in.)
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
■MOUNTING EXAMPLE
50.8 (2)±0.1 (0.0039)
1.27 (0.05) × (68/2-1) = 41.91 (1.65)±0.1 (0.0039)
1.27 (0.05)±0.05 (0.0020)
No.34 No.1
No.68
5.715 (0.225)±0.05 (0.0020)
3.810 (0.15) ±0.05 (0.0020)
1.905 (0.075)±0.05 (0.0020)
68- ø 1 (0.039)
±0.05 (0.0020)
Ejector button
34 (1.339) ±0.05 (0.0020)
67.31 (2.65)~68.0 (2.677)
40 (1.574)±0.1 (0.0039)
4- ø 2.8 (0.110)
±0.1 (0.0039)
No.35
Regardless of how the connector is mounted on the PC
board, a card can be inserted with its face upward.
Nut buried

560HSeries ConnectorConforming toVer. 4
10
Dimensions are in millimeters (inches) www.fcai.fujitsu.com
Specifications
subject to change
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH LEFT-BUTTON EJECTOR, SUNK
MOUNTING TYPE) SUPPORTS TYPE I, II CARDS
■DIMENSIONS
Part number: FCN-565P068-G/W-V4
■PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
The connector is mounted on a PC board so that only its terminal connection part rests on the board.
5.715 (0.225)
±0.05 (0.0020)
3.810 (0.15)
±0.05 (0.0020)
1.905 (0.075)
±0.05 (0.0020)
1.27 (0.05)
50.8 (2)
±0.1(0.0039)
±0.05 (0.0020)
41.91 (1.65)
±0.1 (0.0039)
No.1
No.68
6.7
+0
No.2 No.3
(Card insertion side)
2- ø 2.8 (0.110)
68- ø 1 (0.039)
±0.1(0.0039)
±0.05 (0.0020)
■MOUNTING EXAMPLE
M2.5 screw
Nut
Mounting height
4.5mm(0.177in.)
Nut
Unit: mm (in.)
Unit: mm (in.)
Unit: mm (in.)
3 (0.118)
6 (0.236)
0.51 (0.020) 1.905 (0.075) 3.810 (0.15) 5.715 (0.225)
4.5
(0.177)
2.5 (0.098) 2.1
(0.083)
5 (0.197) 3 (0.118)
67.31 (2.65)
59.7 (2.35)
50.8 (2)
34 (1.339)
2.42 (0.095)
11.2 (0.441)
8 (0.315)
ø 2.8
3.5
(0.138)
35.2 (1.386)
R 1.4
2- ø 2.8 (0.110)
83.38 (3.283)
3.7 (0.146)
10 (0.394)
When a card is ejected
When a card is inserted
11 (0.433)
78.5 (3.091)
42 (1.654)
35.5 (1.398)
7 (0.276)
2.1 (0.083)
No.68
No.35
No.1 No.34No.17
No.51 2.5 (0.098)
5 (0.197)
4.25 (0.167)