Fujitsu FI-6130 Configuration guide

Plastic Rollers x 4
Clean lightly while rotating with your finger. Take care not to roughen the surface.
Cleaning Instructions for
fi-6130 and fi-6140 Scanner
It is recommended that these items be
cleaned EVERY 1,000 SCANS
Consumables Part Number
Consumable Kit CON-3450-011A
Cleaning Kit SC-CLE-WGD
Using F1 Impregnated Cleaning Wipes

Brake Rollers
Clean lightly taking care not to scratch the surface.


Turn the Scanner OFF while cleaning the following locations
ADF Glass Surfaces x 2
Clean lightly.
Pick Roller x 2
Clean lightly taking care not to scratch the surface.
P.T.O.

BEFORE CLEANING
Open the ADF while pulling the
cover open

Feed Rollers




Plastic
Rollers
Glass
Brake Rollers 
Eject Rollers
Pick Roller
ADF Cover
Open Lever

Feed Rollers x 2
For further information please refer to the
fi-6130 and fi-6140 Scanner Operators Guide
which can be found on our Website:
http://www.fujitsu.com/emea/products/
January 2010
Using F1 Impregnated Cleaning Wipes
Turn the Scanner ON while cleaning the following locations
PFU Imaging Solutions Europe Ltd Cleaning Instructions for fi-6130 and fi-6140 Scanner

Open the ADF only if the Function Number Display is showing “1”through “9”.
Simultaneously hold down the “Send to” and “Scan” buttons
on the operator panel. The rollers will start to rotate slowly
Hold a soft dry, moistened cleaning paper against the
surface of the rotating rollers, lightly cleaning the surface.
As a guideline, 7 presses of the “Send to” and “Scan”
buttons make the rollers rotate one full turn.

Eject Rollers x 2

Feed Rollers




Plastic
Rollers
Glass
Brake Rollers 
Eject Rollers
Pick Roller
Clean lightly taking care not to roughen the surface.
“Send to” Button “Scan” Button
