Fujitsu PRIMEQUEST 480 Technical manual

C122-H001-02EN
Front Cover
INSTALLATION PLANNING MANUAL

C122-H001-02EN
FOR SAFE OPERATION
This manual contains important information regarding the use and handling of this
product. Read this manual thoroughly. Use the product according to the instructions
and information available in this manual. Keep this manual handy for further
reference.
Fujitsu makes every effort to prevent users and bystanders from being injured or from
suffering damage to their property. Use the product according to this manual.
ABOUT THIS PRODUCT
This product server is designed and manufactured for use in standard applications
such as office work, personal device, household appliance, and general industrial
applications. This product is not intended for use in nuclear-reactor control systems,
aeronautical and space systems, air traffic control systems, mass transportation
control systems, medical devices for life support, missile launch control systems or
other specialized uses in which extremely high levels of reliability are required, the
required levels of safety cannot be guaranteed, or a failure or operational error could
be life-threatening or could cause physical injury (referred to hereafter as “high-risk”
use). You shall not use this product without securing the sufficient safety required for
the high-risk use. If you wish to use this product for high-risk use, please consult with
sales representatives in charge before such use.

C122-H001-02EN
RADIO FREQUENCY INTERFERENCE STATEMENT
The following notice is for EU users only.
The following notice is for USA users only.
Laser standards
WARNING: This is a product which meets Class A of EN55022. In a domestic environment this
product may cause radio interference in which case the user may be required to take adequate
measures.
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense.
This equipment includes Class 1 laser products and complies with FDA Radiation Performance
Standards, 21 CFR 1040.10 and 1040.11, and the International Laser Safety Standards
IEC60825-1: 2001.

C122-H001-02EN
TRADEMARK ACKNOWLEDGEMENTS
zAdobe, Acrobat, and Reader are either registered trademarks or trademarks of
Adobe Systems Incorporated in the United States and/or other countries.
zEthernet is a registered trademark of Fuji Xerox Co., Ltd. and Xerox Corporation
in the United States and other countries.
zAll other product names mentioned herein are the trademarks or registered
trademarks of their respective owners.
zEvery system and product name in this manual are not always noted with
trademark or registered trademark symbols (™), ().
The contens of this manual may be revised without prior notice.
The contents of this manual shall not be disclosed in any way or reproduced in any
media without the express written permission of Fujitsu Limited.
All Rights Reserved, Copyright FUJITSU LIMITED 2005

C122-H001-02EN
Revision History
(1/1)
Edition Date Revised section
(Added/ Deleted/ Altered) Details
01 2005-07-11  
02 2005-09-15 Entire manual (Altered)
Section 2.2.1 (1)
(Altered/Added)
Section 2.2.1 (2) (Added)
• Technical brush-up
• Modification of the manual
title
• Addition of PRIMEQUEST
series
• Modification of the concept
of units operational grouping
• Addition of description for
concentration of small
equipment
• Addition of conditions for
using mobile phones
Note: In this table, a revised section is indicated by its section number in the current
edition. An asterisk (*) indicates a section in the previous edition.

C122-H001-02EN i
Preface
1
This manual describes requirements and concepts for installation and facility planning
for the PRIMEQUEST 480 and 440. Installation and facility planning should be
performed together with your assigned Fujitsu representatives according to the
instructions provided in this manual.
This manual is intended for persons introducing and planning the installation of a
PRIMEQUEST server, or those who manage server operations. The reader of this
manual is expected to have some knowledge of or experience with server installation
planning.
Structure and Contents of this Manual
This manual is organized as described below:
CHAPTER 1 Installation Reference
This chapter provides outline drawings of PRIMEQUEST units and requirements for
installing the servers.
CHAPTER 2 Connection Reference
This chapter provides cable connection diagrams and lists of required cables.
CHAPTER 3 Precautions Pertaining to Delivery and Installation
This chapter describes precautions regarding delivery and installation of the
equipment.
Acronyms & Abbreviations
This section defines acronyms and abbreviations used in this manual.
Index
The index provides page references for keywords to allow the reader to quickly find
necessary information.

ii C122-H001-02EN
Preface
Other Reference Manuals
The manuals listed below are related to this manual.
Before installing the equipment, first read the PRIMEQUEST 480/440 Installation
Manual (C122-E001EN) and see the related manual.
PRIMEPOWER/PRIMEQUEST Series Installation Planning Manual (C120-
H007EN)
PRIMEQUEST 480/440 System Design Guide (C122-B001EN)
Environmental Requirements for Using This Product
This product is a general-purpose computer intended for use in a computer room.
Conventions for Alert Messages
This manual uses the following conventions to show the alert messages. An alert
message consists of an alert signal and alert statements.
Alert messages in the text
In the text, the alert messages are indented to distinguish them from regular text. A
wider space precedes and follows the message to show where the message begins and
ends.
(Example)
The template is created on a scale of 1:50. When printing the template from
AcrobatReaderor AdobeReadersoftware, be sure to uncheck the
checkbox of Fit to page on the Print dialog box.
Reader Feedback
This indicates information that could help the user to use the
product more effectively.
• In this manual, it is assumed that two BMMs (optional products) can be connected to a single I/O
unit; this is reflected both in the explanations and in the figures included in this manual. At
present, however, the PRIMEQUEST 480/400 series supports only connection to one BMM
(BMM#0) per I/O unit.
• If you find any errors or unclear statements in this manual, please fill in the "Reader’s Comment
Form" sheet at the back of this manual and forward it to the address indicated at the bottom of
the sheet.
• This manual is subject to revision without prior notice.

C122-H001-02EN iii
Contents
Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i
Structure and Contents of this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i
Other Reference Manuals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii
Environmental Requirements for Using This Product . . . . . . . . . . . . . . . . . . . . . ii
Conventions for Alert Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii
CHAPTER 1 Installation Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
1.1 Equipment Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
1.2 Views of the Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6
1.3 Installation Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10
1.4 Equipment Floor Plan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-14
1.5 Equipment Installation Patterns and Service Area . . . . . . . . . . . . . . . . . . . 1-17
1.6 Floor Plan of Openings in Floor and Template . . . . . . . . . . . . . . . . . . . . . . 1-21
1.6.1 Floor plans for openings in the floor . . . . . . . . . . . . . . . . . . . . . . . . . 1-23
1.6.2 Templates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-28
1.7 Cooling Air and Exhaust Flows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-30
CHAPTER 2 Connection Reference. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
2.1 Connection Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
2.2 Signal Cable Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
2.2.1 Basic interfaces and peripherals . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
2.2.2 LAN and other device connections . . . . . . . . . . . . . . . . . . . . . . . . . 2-7
2.2.3 Notes on cabling PRIMEQUEST 480/440 . . . . . . . . . . . . . . . . . . . . 2-10
2.2.4 Locations of external interface ports . . . . . . . . . . . . . . . . . . . . . . . . 2-11
2.3 Power Cable Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16
2.3.1 Input power circuit connection for the PRIMEQUEST 440 . . . . . . . 2-17
2.3.2 Input power circuit connection for the PRIMEQUEST 480 . . . . . . . 2-20
2.3.3 Input power circuit connection for
the extended I/O cabinet and the PCI_Box . . . . . . . . . . . . . . . . . . . 2-25
2.4 Input Power Supply Unit Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-32
2.4.1 PRIMEQUEST 480/440 main unit . . . . . . . . . . . . . . . . . . . . . . . . . . 2-32
2.4.2 Cables between PCI_Box and ACS in the extended I/O cabinet . . 2-33
2.4.3 Cables between ACS in the extended I/O cabinet and
power distribution board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-34
2.5 AC Cable Connection under a Free-Access Floor
(Only for Use inside Japan and General Use outside Japan) . . . . . . . . . . . 2-35
2.6 Circuit Breaking Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-36

iv C122-H001-02EN
Contents
CHAPTER 3 Precautions Pertaining to Delivery and Installation . . . . . . . 3-1
3.1 Elevator Load Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
3.2 Earthquake Preparedness Measures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
3.2.1 Earthquake-proofing construction method . . . . . . . . . . . . . . . . . . . . 3-3
3.2.2 Examples of installing units using
earthquake-proofing construction methods . . . . . . . . . . . . . . . . . . . 3-5
3.2.3 Seismic isolation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9
Acronyms & Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AB-1
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IN-1

C122-H001-02EN v
Contents
Figures
Figure 1.1 Configuration of PRIMEQUEST 480 and 440 main unit . . . . . . . . 1-2
Figure 1.2 Configuration of PRIMEQUEST 480 and 440 main unit
and extended I/O cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
Figure 1.3 Configuration of the PRIMEQUEST 480 main unit and
the extended power cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4
Figure 1.4 Configuration of the PRIMEQUEST 480 main unit,
extended I/O cabinet, and the extended power cabinet . . . . . . . . 1-5
Figure 1.5 External view of the PRIMEQUEST 480/440 main unit . . . . . . . . 1-6
Figure 1.6 External view of the extended power cabinet . . . . . . . . . . . . . . . . 1-7
Figure 1.7 External view of the extended I/O cabinet . . . . . . . . . . . . . . . . . . 1-8
Figure 1.8 External view of the PCI_Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9
Figure 1.9 PRIMEQUEST 480/440 floor plan . . . . . . . . . . . . . . . . . . . . . . . . 1-14
Figure 1.10 Extended power cabinet floor plan . . . . . . . . . . . . . . . . . . . . . . . . 1-15
Figure 1.11 Extended I/O cabinet floor plan . . . . . . . . . . . . . . . . . . . . . . . . . . 1-16
Figure 1.12 Service area for the PRIMEQUEST 480/440 main unit . . . . . . . . 1-17
Figure 1.13 Service area for the PRIMEQUEST 480/440 main unit
and the extended I/O cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-18
Figure 1.14 Service area for the PRIMEQUEST 480 main unit
and the extended power cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . 1-19
Figure 1.15 Service area for the PRIMEQUEST 480 Main unit,
the extended I/O cabinet, and the extended power cabinet . . . . . 1-20
Figure 1.16 Symbols used in floor plans and templates . . . . . . . . . . . . . . . . . 1-22
Figure 1.17 Floor openings for the PRIMEQUEST 480/440 main unit . . . . . . 1-24
Figure 1.18 Floor openings for the PRIMEQUEST 480/440 main unit
and the extended I/O cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-25
Figure 1.19 Floor openings for the PRIMEQUEST 480 main unit and
the extended power cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-26
Figure 1.20 Floor openings for the PRIMEQUEST 480 main unit,
the extended I/O cabinet, and the extended power cabinet . . . . . 1-27
Figure 1.21 Template for the PRIMEQUEST 480/440 main unit . . . . . . . . . . . 1-28
Figure 1.22 Template for the PRIMEQUEST 480/440 main unit and
the extended I/O cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-28
Figure 1.23 Template for the PRIMEQUEST 480 and
the extended power cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-29
Figure 1.24 Template for the PRIMEQUEST 480 main unit,
the extended I/O cabinet, and the extended power cabinet . . . . . 1-29
Figure 1.25 Cooling air and exhaust flows of
the PRIMEQUEST 480/440 main unit . . . . . . . . . . . . . . . . . . . . . . 1-30
Figure 1.26 Cooling air and exhaust flows of the extended power cabinet . . . 1-31

vi C122-H001-02EN
Contents
Figure 1.27 Cooling air and exhaust flows of the extended I/O cabinet . . . . . . 1-31
Figure 1.28 Cooling air and exhaust flows of the PCI_Box . . . . . . . . . . . . . . . 1-32
Figure 2.1 Equipment cable connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Figure 2.2 Interface cable connections (basic interfaces and peripherals) . . 2-4
Figure 2.3 Cable connections (LAN and other device connections) . . . . . . . 2-7
Figure 2.4 External interface ports in the PRIMEQUEST 440 main unit . . . . 2-11
Figure 2.5 External interface ports in the PRIMEQUEST 480 main unit . . . . 2-12
Figure 2.6 External interface ports in the extended power cabinet . . . . . . . . 2-13
Figure 2.7 External interface ports in the extended I/O cabinet
(connected to PRIMEQUEST 440 unit) . . . . . . . . . . . . . . . . . . . . . 2-14
Figure 2.8 External interface ports in the extended I/O cabinet
(connected to PRIMEQUEST 480 unit) . . . . . . . . . . . . . . . . . . . . 2-15
Figure 2.9 Input power system diagram for the PRIMEQUEST 440
(standardconfiguration) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-17
Figure 2.10 PSU locations in the standard PRIMEQUEST 440 configuration
(including a primary power feed option and
redundant power supply unit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-18
Figure 2.11 Input power system diagram for the PRIMEQUEST 440
(dual power feed configuration) . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-19
Figure 2.12 PSU locations in the PRIMEQUEST 440
with a dual power feed option . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-20
Figure 2.13 Input power system diagram for the main unit
(PRIMEQUEST 480 base cabinet) (standard configuration) . . . . . 2-21
Figure 2.14 PSU locations in the standard PRIMEQUEST 480 configuration
(including a single power feed option and
redundant power supply unit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-22
Figure 2.15 Input power system diagram for the main unit
(PRIMEQUEST 480 base cabinet) and extended power cabinet
(dual power feed) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-23
Figure 2.16 PSU locations in the PRIMEQUEST 480
with a dual power feed option . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-24
Figure 2.17 Input power system diagram of PCI_Boxes in
a single power feed configuration (including a redundant PSU)
for use in Japan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-26
Figure 2.18 Input power system diagram of PCI_Boxes in
a dual power feed configuration for use in Japan . . . . . . . . . . . . . 2-27
Figure 2.19 Input power system diagram of PCI_Boxes in a single power feed
configuration (including a redundant PSU) for use outside Japan
(general) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-28

C122-H001-02EN vii
Contents
Figure 2.20 Input power system diagram of PCI_Boxes in a dual power feed
configuration (including a redundant PSU) for use outside Japan
(general) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-29
Figure 2.21 Input power system diagram of PCI_Boxes in a single power feed
configuration (including a redundant PSU) for use in Europe . . . . 2-30
Figure 2.22 Input power system diagram of PCI_Boxes in
a dual power feed configuration for use in Europe . . . . . . . . . . . . 2-31
Figure 2.23 AC cable connection under a free-access floor
(only for use inside Japan and general use outside Japan) . . . . . 2-35
Figure 2.24 Characteristics of circuit breakers in
customers' distribution panels installed in Japan . . . . . . . . . . . . . . 2-37
Figure 2.25 Characteristics of circuit breakers in
customers' distribution panels installed outside Japan . . . . . . . . . 2-38
Figure 3.1 Earthquake-proofing construction method
(anchoring on the floor surface) . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Figure 3.2 Earthquake-proofing construction method (through-floor anchoring) 3-4
Figure 3.3 Example of installing a PRIMEQUEST 480/440 system by
using the earthquake-proofing construction method . . . . . . . . . . . 3-5
Figure 3.4 Example of installing a PRIMEQUEST 480 system with
an extended power cabinet by using
the earthquake-proofing construction method . . . . . . . . . . . . . . . . 3-6
Figure 3.5 Example of installing a PRIMEQUEST 480/440 system with
an extended I/O cabinet by using
the earthquake-proofing construction method . . . . . . . . . . . . . . . . 3-7
Figure 3.6 Example of installing a PRIMEQUEST 480 system with
an extended power cabinet and extended I/O cabinet by
using the earthquake-proofing construction method . . . . . . . . . . . 3-8
Figure 3.7 Opening on the free-access floor
when a seismic-isolation leveling foot is used . . . . . . . . . . . . . . . . 3-9

viii C122-H001-02EN
Contents
Tables
Table 1.1 Units and their specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Table 1.2 Installation specifications (dimensions and weight) . . . . . . . . . . . . 1-10
Table 1.3 Installation specifications (air conditioning 1) . . . . . . . . . . . . . . . . 1-11
Table 1.4 Installation specifications (altitude and temperature ranges). . . . . 1-11
Table 1.5 Installation specifications (air conditioning 2) . . . . . . . . . . . . . . . . 1-12
Table 1.6 Installation specifications (power supplies) . . . . . . . . . . . . . . . . . . 1-13
Table 2.1 Cable list (basic interface and peripherals) . . . . . . . . . . . . . . . . . . 2-5
Table 2.2 Cable list (LAN and other device connection) . . . . . . . . . . . . . . . . 2-8
Table 2.3 AC cable specifications for the PRIMEQUEST 480/440 main unit 2-32
Table 2.4 Specifications of the AC cables used between
a PCI_Box and ACS in the extended I/O cabinet . . . . . . . . . . . . . 2-33
Table 2.5 Specifications of the AC cables between
ACS in the extended I/O cabinet and power distribution board . . . 2-34
Table 2.6 Requirements for circuit breakers in
customers' distribution panels installed in Japan. . . . . . . . . . . . . . 2-36
Table 2.7 Requirements for circuit breakers in
customers’ distribution panels installed outside Japan . . . . . . . . . 2-38
Table 3.1 Elevator load requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

C122-H001-02EN 1-1
CHAPTER 1 Installation Reference
1
This chapter provides the information required for installing the PRIMEQUEST 480/
440 server.
1.1 Equipment Configuration
Table 1.1 lists the units that comprise the PRIMEQUEST server and their
specifications. Figure 1.1 and Figure 1.4 show a sample system configuration.
Table 1.1 Units and their specifications
Unit Specifications Remarks
PRIMEQUEST 480
main unit
Unit that can contain up to eight system
boards (maximum of 32 CPUs) and up
to eight IO_Units
Standard equipment
PRIMEQUEST 440
main unit
Unit that can contain up to four system
boards (maximum of 16 CPUs) and up
to four IO_Units
Standard equipment
Extended power
cabinet
Power supply cabinet that is connected
to the PRIMEQUEST 480 main unit
for dual power feed configuration
Extended I/O
cabinet
Cabinet that contains PCI_Boxes and
that is connected to the PRIMEQUEST
480 or 440 main unit
PCI_Box Device used to expand the number of
PCI slots. 4 PCI unit can be added for
each addition of a PCI_Box.
Each PCI unit contains three PCI slots.
Up to eight units can be connected to
the PRIMEQUEST 480 main unit.
Up to four units can be connected to
the PRIMEQUEST 440 main unit.

1-2 C122-H001-02EN
CHAPTER 1 Installation Reference
Figure 1.1 Configuration of PRIMEQUEST 480 and 440 main unit
Rear view
1800 (70.8)
1100 (43.3)
Front view
Top view
Right-side view
738 (29.0)
90 (3.5)
Unit: mm (in.)

C122-H001-02EN 1-3
1.1 Equipment Configuration
Figure 1.2 Configuration of PRIMEQUEST 480 and 440 main unit and
extended I/O cabinet
Right-side view
Top view
Front view
1100 (43.3)1422 (55.9)
1800 (708)
Unit: mm (in.)
Extended I/O
cabinet Main unit

1-4 C122-H001-02EN
CHAPTER 1 Installation Reference
Figure 1.3 Configuration of the PRIMEQUEST 480 main unit and
the extended power cabinet
1100 (43.3)
Extended power cabinet
Main unit
Right-side view
1042 (41.0)
1800 (70.8)
Front view
Top view
Unit: mm (in.)