Fujitsu ETERNUS DX60 S4 User manual

FUJITSU Storage
ETERNUS DX, ETERNUS AF
Configuration Guide (Power Synchronized Unit)
ETERNUS DX S4/S3 series Hybrid Storage Systems,
ETERNUS DX60 S2/DX80 S2/DX90 S2 Disk Storage Systems,
ETERNUS AF series, ETERNUS DX200F All-Flash Arrays
P3AM-8012-10ENZ0

This page is intentionally left blank.

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide (Power Synchronized Unit)
Copyright 2017 FUJITSU LIMITED P3AM-8012-10ENZ0
3
Preface
Fujitsu would like to thank you for purchasing our power synchronized unit for the ETERNUS DX/AF storage
systems.
The power synchronized unit is a device that synchronizes power operations of the ETERNUS DX/AF storage
systems with servers.
This manual introduces the user to the power synchronized unit, and explains the regular checks and
maintenance that are required.
Please carefully review the information outlined in this manual.
This manual is designed for use with the following ETERNUS DX/AF storage systems:
•ETERNUS DX60 S4/DX100 S4/DX200 S4 Hybrid Storage Systems
•ETERNUS DX500 S4/DX600 S4 Hybrid Storage Systems
•ETERNUS DX60 S3/DX100 S3/DX200 S3 Hybrid Storage Systems
•ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems
•ETERNUS DX8100 S3/DX8700 S3/DX8900 S3 Hybrid Storage Systems
•ETERNUS DX60 S2/DX80 S2/DX90 S2 Disk Storage Systems
•ETERNUS AF250 S2 All-Flash Arrays
•ETERNUS AF650 S2 All-Flash Arrays
•ETERNUS AF250 All-Flash Arrays
•ETERNUS AF650 All-Flash Arrays
•ETERNUS DX200F All-Flash Arrays
Tenth Edition
October 2017
Applicable Environment
The power synchronized unit was designed and manufactured with user safety for general office
environments in mind. When using the power synchronized unit, follow the handling instructions, placement
and cautionary notes listed in this manual. If used beyond the limits described, the users may be at risk of
personal injury and/or material damage.
Using this Manual
This manual contains important information regarding safe usage.
Please read this manual carefully before using the power synchronized unit. Pay special attention to
"Safety Precautions" (page 9), and understand the contents thoroughly before using the power synchronized
unit. Keep this manual in a safe place for future reference.
Fujitsu pays careful attention to the safe use of its products to prevent user injury and/or material damage. To
use the power synchronized unit properly, please follow the instructions in this manual.

Preface
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide (Power Synchronized Unit)
Copyright 2017 FUJITSU LIMITED P3AM-8012-10ENZ0
4
Compliance with Standards
The power synchronized unit is compliant with the following standards.
The company names, product names and service names mentioned in this document are registered
trademarks or trademarks of their respective companies.
Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation.
Type Standard
Product safety UL60950-1, CSA-C22.2 No. 60950-1, EN60950-1, IEC60950-1
Electromagnetic Compatibility FCC CFR47 part 15 Class A, ICES-003 Class A, EN55022 Class A, VCCI Class A
Electromagnetic Immunity EN55024
CE certification Electromagnetic Compatibility Directive 2004/108/EC
Low Voltage Directive 2006/95/EC
Environmental compliance RoHS-compliant (Restriction of hazardous substances)
WEEE-compliant (Waste electrical and electronic equipment)
The power synchronized unit is designed, developed and manufactured as contemplated for general use,
including without limitation, general office use, personal use, household use, and ordinary industrial use,
but is not designed, developed and manufactured for use in situations with accompanying fatal risks or
dangers that, unless extremely high safety is secured, could lead directly to death, personal injury, severe
physical damage or other loss (hereinafter "High Safety Required Use"), including without limitation,
nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport control,
medical life support system, and missile launch control in weapon systems. Do not use the power
synchronized unit for High Safety Required Use without securing the sufficient safety level required. If you
wish to use the power synchronized unit for High Safety Required Use, please consult with our sales
representative before such use.

Preface
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide (Power Synchronized Unit)
Copyright 2017 FUJITSU LIMITED P3AM-8012-10ENZ0
5
●Traditional Chinese
●Simplified Chinese

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide (Power Synchronized Unit)
Copyright 2017 FUJITSU LIMITED P3AM-8012-10ENZ0
6
About this Manual
Organization
This manual is composed of the following six chapters:
●Chapter 1 Overview
This chapter provides overviews, features, specifications, and system configuration examples of the power
synchronized unit. The names and usage of the various components for the power synchronized unit are
also described.
●Chapter 2 Installation
This chapter describes how to install the power synchronized unit.
●Chapter 3 Powering On and Off
This chapter describes how to turn on and off the power synchronized unit.
●Chapter 4 Connection and Settings
This chapter describes the connection and setup procedures to operate the power synchronized unit.
●Chapter 5 Adding a Connecting Device
This chapter describes how to connect the power synchronized unit when a device is added.
●Chapter 6 Operation and Maintenance
This chapter describes how to change the configuration and appropriate responses for any problems that
may occur.
Read this chapter when operating or performing maintenance on the power synchronized unit, or if an
error occurs.
Refer to the manuals for each peripheral concerning details not included in this manual.

About this Manual
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide (Power Synchronized Unit)
Copyright 2017 FUJITSU LIMITED P3AM-8012-10ENZ0
7
Warning Notations
Warning signs are shown throughout this manual in order to prevent injury to the user and/or material
damage. These signs are composed of a symbol and a message describing the recommended level of caution.
The following section explains the symbols, their levels of caution, and their meanings as used in this manual.
The following symbols are used to indicate the type of warnings or cautions being described.
WARNING
This symbol indicates the possibility of serious or fatal injury if the power
synchronized unit is not used properly.
CAUTION
This symbol indicates the possibility of minor or moderate personal injury, as
well as damage to the power synchronized unit and/or to other users and their
property, if the power synchronized unit is not used properly.
This symbol indicates IMPORTANT information for the user to note when using
the power synchronized unit.
Electric Shock
The triangle emphasizes the urgency of the WARNING and CAUTION
contents. Inside the triangle and above it are details concerning the symbol
(e.g. Electric Shock).
No Disassembly
The barred "Do Not..." circle warns against certain actions.
The action which should be avoided is both illustrated inside the barred circle
and written above it (e.g. No Disassembly).
Unplug
The black "Must Do..." circle indicates actions that must be taken.
The required action is both illustrated inside the black circle and written above
it (e.g. Unplug).

About this Manual
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide (Power Synchronized Unit)
Copyright 2017 FUJITSU LIMITED P3AM-8012-10ENZ0
8
How Warnings are Presented in this Manual
A message is written beside the symbol indicating the caution level. This message is marked with a vertical
ribbon in the left margin, to distinguish this warning from ordinary descriptions.
An example is shown here.
Symbols Used in this Manual
•The following symbol is used throughout this manual:
•"ETERNUS DX/AF" refers to the ETERNUS DX60 S4/DX100 S4/DX200 S4, ETERNUS DX500 S4/DX600 S4,
ETERNUS DX60 S3/DX100 S3/DX200 S3, ETERNUS DX500 S3/DX600 S3, and ETERNUS DX8100 S3/DX8700 S3/
DX8900 S3 Hybrid Storage Systems; the ETERNUS DX60 S2/DX80 S2/DX90 S2 Disk Storage Systems; and
the ETERNUS AF250 S2/AF650 S2, ETERNUS AF250/AF650 and ETERNUS DX200F All-Flash Arrays in this
manual.
About the Latest Version of this Manual and Contact Details
The information in this manual is subject to change without notice for improvement and functionality
expansion of the power synchronized unit.
The latest version of this manual and important service and support contacts (see "Contact Fujitsu") for Fujitsu
Customer Service in your country of purchase is available at the following website:
http://www.fujitsu.com/global/support/products/computing/storage/disk/manuals/manual.html
Warning Level Indicator
Warning Type Indicator
Warning Details
•To avoid damaging the power synchronized unit, pay
attention to the following points when cleaning the power synchronized
unit.
Make sure to disconnect the power when cleaning.-
Be careful that no liquid seeps into the power synchronized unit
when using cleaners, etc.
-
Do not use alcohol or other solvents thinners to clean the
power synchronized unit.
-
Warning Layout Ribbon
Example Warning
Do
Functions and know how which can be useful when setting up or operating the
power synchronized unit.

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide (Power Synchronized Unit)
Copyright 2017 FUJITSU LIMITED P3AM-8012-10ENZ0
9
Safety Precautions
This section describes safety precautions.
Make sure to follow the instructions described below to ensure the safe use of the power synchronized unit.
■If you detect an unusual occurrence during operation
WARNING
Do Not
•If the power cord and/or power plug is damaged, do not use the power
synchronized unit and contact your sales representative or your maintenance
engineer. Never attempt to repair the power synchronized unit by yourself. Not
doing so may cause electric shock or fire.
Unplug
•If the power synchronized unit overheats, gives off smoke or an unusual odor,
makes an unusual sound, or shakes abnormally, immediately disconnect the
power plug from the socket. After the problem has subsided, contact your
sales representative or your maintenance engineer. Never attempt to repair
the power synchronized unit by yourself. Not doing so may cause electric
shock or fire.
•If any liquids such as water or foreign objects like metal fragments get into the
power synchronized unit, immediately disconnect the power plug from the
socket. Then, contact your sales representative or your maintenance engineer.
Do not attempt to repair the power synchronized unit by yourself. Doing so
may cause electric shock or fire.
•If the power synchronized unit is dropped or covers are damaged, immediately
disconnect the power plug from the socket. Then, contact your sales
representative or your maintenance engineer. Do not attempt to repair the
power synchronized unit by yourself. Doing so may cause electric shock or fire.

Safety Precautions
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide (Power Synchronized Unit)
Copyright 2017 FUJITSU LIMITED P3AM-8012-10ENZ0
10
■Instructions for installation
WARNING
Do Not
•Do not place the power synchronized unit in an area with bad ventilation or
where anything that may cause a fire, or flammable gases are generated.
Doing so may cause a fire and damage the power synchronized unit.
•Do not place the power synchronized unit in locations subject to oil smoke,
steam, humidity and dust, or in places where the power synchronized unit
may come into contact with water. Doing so may lead to electric shock, fire,
and/or damage the power synchronized unit.
•Do not place any objects containing water such as vases and cups on or near
the power synchronized unit. Doing so may cause water to get into the power
synchronized unit and lead to electric shock, fire, and/or damage the power
synchronized unit.
•Do not place the power synchronized unit on an unstable floor. Doing so may
cause the power synchronized unit to fall, resulting in injury or damage to the
power synchronized unit.
•Do not connect power cords or any other cables to the power synchronized unit
during thunderstorms. Doing so may lead to electric shock and/or fire.
Unplug
•When the power synchronized unit is installed or moved, disconnect the power
plug from the socket. Remove all the connected cables. Watch your step during
the operation. Not doing so may damage the power cords and cause electric
shock or fire. Failure to do so may also cause the power synchronized unit to
fall and injure others.
CAUTION
Do Not
•Do not use the power synchronized unit in an area affected by corrosive gas or
in a salty environment. Doing so may cause device failure.
•Do not knock or place heavy objects on the power synchronized unit or
optional products. Doing so may cause injury or damage the power
synchronized unit.