Fujitsu MDG3064UB User manual

MDG3064UB, MDG3130UB
OPTICAL DISK DRIVES
MAINTENANCE MANUAL
C156-F046-01EN

FOR SAFE OPERATION
Handling of This Manual
This manual contains important information for using this product. Read thoroughly before using
the product. Use this product only after thoroughly reading and understanding especially the
section "Important Alert Items" in this manual. Keep this manual handy, and keep it carefully.
FUJITSU makes every effort to prevent users and bystanders from being injured or from suffering
damage to their property. Use the product according to this manual.
This product is designed and manufactured for use in standard applications such as office work,
personal devices and household appliances. This product is not intended for special uses (atomic
controls, aeronautic or space systems, mass transport vehicle operating controls, medical devices for
life support, or weapons firing controls) where particularly high reliability requirements exist,
where the pertinent levels of safety are not guaranteed, or where a failure or operational error could
threaten a life or cause a physical injury (hereafter referred to as "mission-critical" use). Customers
considering the use of these products for mission-critical applications must have safety-assurance
measures in place beforehand. Moreover, they are requested to consult our sales representative
before embarking on such specialized use.
First Edition October 2001
The contents of this manual may be revised without prior notice.
The contents of this manual shall not be disclosed in any way or reproduced in any media without
the express written permission of Fujitsu Limited.
All Rights Reserved, Copyright FUJITSU LIMITED 2001

C156-F046-01EN
Revision History
(1/1)
Edition Date Revised section (*1)
(Added/Deleted/Altered) Details
01 2001.10.5 — —
*1 Section(s) with asterisk (*) refer to the previous edition when those were deleted.

This page is intentionally left blank.

C156-F046-01EN i
Preface
This document describes procedures for maintenance of the MDG3064UB/MDG3130UB
(DynaMO 640U2/1300U2), a 3.5-inch magneto-optical disk drive. The
MDG3064UB/MDG3130UB (referred to as "the product" hereafter) is provided with the
MCM3064UB/MCM3130UB 3.5-inch magneto-optical disk drive unit (referred to as "MO
drive" hereafter). The components are built in a case designed specifically for the product.
Refer to related manuals for operations other than maintenance and for explanation about
an MO drive.
The organization of this manual, related reference manual and conventions for alert
messages follow.
Overview of Manual
This manual consists of the following six chapters, glossary, and abbreviation:
Chapter 1 Overview
This chapter introduces the MDG3064UB/MDG3130UB MO disk drive. The chapter
describes the system features and outline of maintenance.
Chapter 2 Diagnosis and Maintenance
This chapter describes maintenance conditions, diagnosis methods, failure analysis
procedures, and system updating procedures of the MDG3064UB/MDG3130UB MO disk
drive.
Chapter 3 Troubleshooting
This chapter describes troubleshooting of a system connected to a Macintosh G3 and
Windows computer.
Chapter 4 Returning Repaired Unit
This section describes procedures for unpacking, packing, transporting, and storing the
MDG3064UB/MDG3130UB MO disk drive.
Chapter 5 Cleaning

Preface
ii C156-F046-01EN
CONVENTIONS USED INTHIS MANUAL
Conventions for Alert Messages
This manual uses the following conventions to show the alert messages. An alert message
consists of an alert signal and alert statements. The alert signal consists of an alert symbol
and a signal word or just a signal word.
The following are the alert signals and their meanings:
This indicates a hazardous situation likely to result in
serious personal injury if the user does not perform the
procedure correctly.
This indicates a hazardous situation could result in serious
personal injury if the user does not perform the procedure
correctly.
This indicates a hazardous situation could result in minor
or moderate personal injury if the user does not perform
the procedure correctly. This alert signal also indicates
that damages to the product or other property, may occur if
the user does not perform the product correctly.
This indicates information that could help the user use the
product more efficiently.
In the text, the alert signal is centered, followed below by the indented message. A wider
line space precedes and follows the alert message to show where the alert message begins
and ends. The following is an example:

Preface
C156-F046-01EN iii
(Example)
IMPORTANT
Fujitsu issues a Change Request/Notification regarding post-factory-shipment revision
number changes. When the user changes the version number, the revision-number label
should be updated as described above after the change is applied.The main alert messages
in the text are also listed in the “Important Alert Items.”
Attention
Please forward any comments you may have regarding this manual.
To make this manual easier for users to understand, opinions from readers are needed.
Please write your opinions or requests on the Comment at the back of this manual and
forward it to the address described in the sheet.

This page is intentionally left blank.

C156-F046-01EN v
Important Alert Items
Important Alert Messages
The important alert messages in this manual are as follows:
A hazardous situation could result in minor or moderate personal injury if the
user does not perform the procedure correctly. Also, damage to the product
or other property, may occur if the user does not perform the procedure
correctly.
Task Alert message Page
Normal Operation When cleaning the drive, do not use a toxic cleaning agent. 5-1
Normal Operation In case of contact, immediately flush eyes with water. 5-7

This page is intentionally left blank.

C156-F046-01EN vii
MDG3064UB, MDG3130UB
OPTICAL DISK DRIVES
MAINTENANCE MANUAL
(C156-F046)
<This manual>
1. OVERVIEW
2. DIAGNOSIS AND MAINTENANCE
3. TROUBLESHOOTING
4. RETURNING REPAIRED UNIT
5. CLEANING
MCE3130UB, MCF3064UB
OPTICAL DISK DRIVES
PRODUCT MANUAL
(C156-E222)
1. GENERAL DESCRIPTION
2. SPECIFICATIONS
3. INSTALLATION REQUIREMENTS
4. HOST INTERFACE
5. OPERATION AND CLEANING
6. DIAGNOSTICS AND MAINTENANCE
MANUAL ORGANIZATION

viii C156-F046-01EN
REFERENCED STANDARDS
The product specifications and functions described in this manual conform to the following
standards:
Specification
(document) number Name Concerned organization
Universal Serial Bus Specification, Revision 1.1 USB implementers Forum
Universal Serial Bus Mass Storage Class Bulk-Only
Transport, Revision 1.0 USB implementers Forum
Universal Serial Bus Mass Storage Class
Specification Overview, Revision 1.0 USB implementers Forum
ISO/IEC 10090 90mm Optical Disk Cartridges, rewritable and read
only, for data interchange. ISO/IEC (*1)
ISO/IEC 13963 Data Interchange on 90mm Optical Disk cartridges
Capacity: 230 megabytes per cartridge. ISO/IEC (*1)
ISO/IEC 15041 Data Interchange on 90mm Optical Disk Cartridges
Capacity: 640 megabytes per cartridge. ISO/IEC JTC1 (*1)
Cherry Book Version
1.0 GIGAMO 1.3GB 90mm Magneto-Optical Disk
System.
FUJITSU LIMITED SONY
CORPORATION
*1
ISO= International Organization for Standardization
IEC= International Electrical for Commission
JTC1= Joint Technical Committee 1

C156-F046-01EN ix
Contents
CHAPTER 1 OVERVIEW ................................................................................ 1-1
1.1 Description 1-1
1.2 Maintenance Method 1-1
CHAPTER 2 DIAGNOSIS AND MAINTENANCE............................................ 2-1
2.1 Maintenance Conditions 2-1
2.2 Diagnosis 2-2
2.3 Troubleshooting Method 2-2
2.4 Unit Version Number 2-3
CHAPTER 3 TROUBLESHOOTING ............................................................... 3-1
3.1 For Macintosh Users 3-1
3.2 For Windows Users 3-2
CHAPTER 4 RETURNING REPAIRED UNIT.................................................. 4-1
4.1 Unpacking 4-1
4.2 Packing 4-1
4.3 Transportation 4-3
4.4 Storage 4-3
CHAPTER 5 CLEANING................................................................................. 5-1
5.1 Cleaning Drive 5-1

Contents
x C156-F046-01EN
5.2 MO Cartridge Operation 5-2
5.2.1 MO cartridge 5-2
5.2.2 Write protect tab 5-3
5.2.3 Notes 5-3
5.3 Cleaning Cartridge 5-4
5.3.1 Cleaning tool 5-4
5.3.2 Cleaning procedure 5-5

Contents
C156-F046-01EN xi
Illustrations
Figures
Figure 2.1 Unit revision number label 2-3
Figure 2.2 Unit revision-number indication 2-4
Figure 4.1 Packing and handling of MDG3064UB/MDG3130UB 4-2
Figure 5.1 MO cartridge 5-2
Figure 5.2 Write protect tab 5-3
Figure 5.3 Cleaning procedure (1) 5-6
Figure 5.4 Cleaning procedure (2) 5-6
Figure 5.5 Cleaning procedure (3) 5-7
Figure 5.6 Cleaning procedure (4) 5-7
Tables
Table 5.1 Head cleaner 5-1
Table 5.2 Cleaning kit 5-4
Table 5.3 Packaged items (cleaning kit) 5-4
Table 5.4 Cleaning kit (supplement) 5-5

This page is intentionally left blank

C156-F046-01EN 1-1
CHAPTER 1 OVERVIEW
1.1 Description
1.2 Maintenance Method
1.1 Description
This product assumes that repair operations are performed in a factory.
On-site replacement of an MO drive unit.
1.2 Maintenance Method
In the field, a faulty section should be isolated among the following four:
−Main unit
−Cable
−Media
−AC adapter
If a main unit is faulty, the product should be sent to Fujitsu for repairing in a
factory.

This page is intentionally left blank

C156-F046-01EN 2-1
CHAPTER 2 DIAGNOSIS AND MAINTENANCE
2.1 Maintenance Condition
2.2 Diagnosis
2.3 Troubleshooting Method
2.4 Unit Version Number
2.1 Maintenance Conditions
The following conditions are applicable to on-site maintenance:
(1) Preventive maintenance
No preventive maintenance is required.
(2) Service life
The internal MO drive does not require and overhaul during the first five years
after installation, provided that the customer cleans the disks and optical parts, and
handles them appropriately.
(3) Service system and repair
Fujitsu has a service system and repair facility for MO drives. Customers should
submit information required for the replacement or repair of an MO drive to the
responsible person in Fujitsu. The following information is usually required:
a) Model No. of the internal MO drive, part number (P/N), unit version number,
serial number (S/N), and manufacturing date
b) Fault occurrence status
•Date of failure occurrence
•System configuration
•Environmental conditions (temperature and humidity, voltage, etc.)
c) Fault history
d) Fault details
•Failure outline
•Error messages
•Other fault analysis information

Diagnosis and MaintenanceDiagnosis and Maintenance
2-2 C156-F046-01EN
2.2 Diagnosis
The MO drive has an initial self-diagnosis function, which checks the normal basic
operation of the MO drive.
•Initial self-diagnosis function
When the power is turned on, the MO drive executes initial self-diagnosis,
which includes a basic test of hardware functions.
If an error is detected during self-diagnosis, the LED on the front panel of the
MO drive blinks. The status can be cleared by turning the power off and then
on again. When this status is cleared, the MO drive re-executes the initial
self-diagnosis.
2.3 Troubleshooting Method
The system-level troubleshooting steps listed below are performed for determining
if the fault is caused by an MO drive unit or caused by a system. The steps should
be performed by customers on-site.
Item Recommended procedure
MO cartridge Check that a recommended MO cartridge is loaded and the surface
of the disk is free from dirt or scratches.
AC adapter Check whether power indicator on the device side has lighted up
before connecting the device between host computer with the USB
cable.
Interface cable connection Check that the interface cable is correctly connected to the MO
drive.
System cable Check that all cables in the system are correctly connected.
System diagnosis test Execute the system level diagnostic routines given in the host
computer manual to further isolate the fault, if possible.
Intermittent or indefinite error Replace the MO drive if possible. If the faulty condition continues
after the replacement, the fault will not be caused by the MO drive.
Refer to the provided hardware and software manuals about the
system further, for clues of identifying cause of the failure.