Furniture of America Clarisse CM-DK6148 User manual

1 / 11
MODEL #
CM-DK6148
Questions?
GIVE US A CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PT)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
VERSION # 21-06-21
2 - People
Phillips
Screwdriver
(Not Included)
(Included)
Allen Wrench
Recommended

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific Time and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PT)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed are all acccounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2 / 11

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent to prevent
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
scratches and damages.
3 / 11

4 / 11

#1 1pc #2 4pcs #3 1pc #4 1pc
#5 2pcs
Mirror
Mirror bottom plate
Cabinet body
VANITY SET
CM-DK6148
5 / 11
Table Leg
#6 1pc #7 4pcs
Stool Seat Stool Leg
Mirror connecting rod
#A 10pcs
Bolt Ø1/4'' x 1-3/8''
#C 16pcs
#B 16pcs
Lock washer Ø1/4'' Flat Washer
Ø5/16'' x 19mm

6 / 11
#D 1pc
Allen Wrench 4mm
#E 4pcs #F 8pcs
Bolt Ø1/4'' x 3/4''
L - Angle lron
#G 2pcs #I 1set
Anti-tip Skit
Bolt Ø5/16'' x 2-3/8''
#H 8pcs
Bolt Ø1/4'' x 2''
#6
#7
#1
#2
#3
#4 #5
#5

ASSEMBLY INSTRUCTIONS
1
2
7 / 11
Part #1 x1pc
Part #2 x4pcs
Hardware #E x4pcs
Hardware #F x8pcs
#1
#2
#2
#2
#2
#2
#1
#D
#E
#F
Attach the legs (#2) to the bottom holes of the desk (#1). Make sure the hole on the legs (#2)
are facing where the holes of the desk (#1) are at as shown in the picture.
Align iron brackets (#E) to the holes of the legs (#2) and desk (#1). Secure with bolts (#F).

ASSEMBLY INSTRUCTIONS
3
4
8 / 11
Part #4 x1pc
Hardware #G x2pcs
Part #3 x1pc
Hardware #A x2pcs
#G
#D
#4
#4
#3
#D
#A
Screw bolts (#G) to the holes of the mirror (#4).
Align the mirror (#4) to the holes of
the mirror bottom plate (#3). Secure
with bolts (#A).

ASSEMBLY INSTRUCTIONS
5
6
9 / 11
Part #5 x2pcs
Hardware #A x4pcs
Hardware #B x4pcs
Hardware #C x4pcs
Hardware #A x4pcs
Hardware #B x4pcs
Hardware #C x4pcs
#1
#5
#D #A#B#C
#4
#5
#D
#A #B #C
Prepare 4 bolts assembly by inserting lock washer (#B), then flat washer (#C) onto bolts (#A). Align mirror
connecting rods (#5) to the back holes of the desk (#1). Secure with bolts (#A).
Prepare 4 bolts assembly by inserting lock washer (#B), then flat washer (#C) onto bolts (#A).
Align mirror (#4) to the holes of the mirror connecting rods (#5). Secure with bolts (#A).

ASSEMBLY INSTRUCTIONS
7
8
10 / 11
WALL
#I
Hardware #I x1set
#6
#7
#D
#B
#C
#H
Part #6 x1pc
Part #7 x4pcs
Hardware #H x8pcs
Hardware #B x8pcs
Hardware #C x8pcs
Prepare 8 bolts assembly by inserting lock washer (#B),
then flat washer (#C) onto bolts (#H). Align legs (#2) to
the holes of the seat (#1), then secure with bolts (#H).