Furniture of America CM4292EX-S User manual

EASY
The Assembly Rating is a 5-point system that
shows the degree of effort needed in
assembling a specific product (with 1 being
easy and 5 being difficult). For some
products, two persons are recommended.
CM4292EX-S
Allen Wrench (Included)
Assembly Instructions
Tools Required for Assembly:
Rev.14-10-17
Page 1 of 4
DIFFICULT
ASSEMBLY RATING
2 PERSONS RECOMMENDED

Page 2 of 4

Parts List
#1 x 1 pc
Table Top
#2 x 4 pcs
Leg
#A x 8 pcs
Bolt 5/16”x2-1/2”
#B x 8 pcs
Lock Washer
Before you begin, please read Page 2
of “Assembly and Care Advice”.
And remember, do not tighten until
each step is completed or instructed.
#C x 8 pcs
Flat Washer
Due to the size and/or weight of this product, it is
highly recommended that the assembly should be
done near the area of its intended location. Make
sure you have enough space to move around
during the assembly. ALWAYS have at least two
people to help with transporting and assembling the
product to avoid any potential injury and/or damage.
MD
Page 3 of 4
#D x 1 pc
Allen Wrench
Hardware List

I. Carefully place the table top (#1) facing down on a protected surface.
II. Align the 4 legs (#2) with the bottom corners of the table top (#1).
III. Prepare 8 bolt assemblies by inserting FIRST the lock washer (#B) onto the bolt
(#A) and then the flat washer (#C) onto the SAME bolt (#A), in that order.
IV. Insert the bolt assemblies through the pre-drilled holes on the bottom corners of
the table top (#1) and secure those bolts using theAllen wrench (#D) to lock them
with the legs (#2).
V. Carefully turn the completed table upright. Make sure the table is rested on a flat
surface and does not feel loose or wobbly. If it does, double check that the bolts
are secured and properly tightened.
Turn right (clockwise) to tighten
Page 4 of 4
ASSEMBLY IS COMPLETED
#A x 8 pcs
#B x 8 pcs
#C x 8 pcs