Furniture of America CM4642E User manual

EASY
The Assembly Rating is a 5-point system that
shows the degree of effort needed in
assembling a specific product (with 1 being
easy and 5 being difficult). For some
products, two persons are recommended.
Assembly Instructions
No Tools Required for Assembly
Rev.14-05-22
Page 1 of 5
DIFFICULT
ASSEMBLY RATING
CM4642E

Page 2 of 5

Parts List
#1 x 1 pc
Table Top
#3 x 4 pcs
Foot
#5 x 1 pc
Table Glass
#2 x 4 pcs
Pedestal
#4 x 1 pc
Bottom Shelf
Before you begin, please read Page 2
of “Assembly and Care Advice”.
And remember, do not tighten until
each step is completed or instructed.
MD
Page 3 of 5

Page 4 of 5
Carefully place the table top (#1) facing downward on a
protected surface. Align the threaded end of the pedestals
(#2) with the pre-drilled holes on the bottom of the table top
(#1) and tighten by hand until secured.
#1
Align the bottom shelf (#4) with the with the pre-drilled
holes on the pedestals (#2). Then align the threaded end
of the feet (#3) with the pre-drilled holes on the bottom
shelf (#4) and tighten by hand until secured.

Page 5 of 5
Carefully turn the table upright. Place the table glass (#5)
onto the table top (#1). Make sure the table is rested on a
flat surface and it does not feel loose or wobbly. If it does,
double check that the bolts are secured and properly tighten.
#1
ASSEMBLY IS COMPLETED