Furniture of America Lodida FOA-BK653 User manual

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2 / XXXXXXX14

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3 / XXXXXXX14

4 / XXXXXXX14

1) Align guardrails (#3,4,5) to headboards (#1,2), then secure by
using bolts (#E,F). The upper hole on each guardrails uses bolts
(#E) while the lower holes use bolts (#F).
2) Align tubes (#6,7) to the
headboards (#1,2), then secure
by using bolts (#F).

Align slats (#8,9) to the upper bed, then secure by
using bolts (#B).
Align slats (#10,11) to the middle bed, then secure
by using bolts (#B).
Align slats (#12,13) to the bottom bed, then secure
by using bolts (#B).
1) Align center tube (#15) to the
upper and bottom bed, then
secure by using bolts (#D).
2) Secure support tube (#15)
to slats (#13) of the bottom bed
by using bolts (#C).
3) Secure support legs (#16) to
the slats (#13) of the bottom bed
by using bolts (#B).

1) Secure ladder (#14) to the bunk
bed by using bolts (#D).
2) Align fastener (#17) to the
bunk bed and ladder, then
secure by using bolts (#A).