Furniture of America CM7891Q User manual

1 / 9
MODEL #
CM7891Q
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
VERSION# 19-07-26
2 - Persons
Recommended
1 / 9
MODEL #
CM7891EK/CK
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
VERSION# 19-07-26
2 - Persons
Recommended
Phillips Screwdriver
(Not Included)
(Included)
Allen Wrench
Phillips Screwdriver
(Not Included)
(Included)
Allen Wrench

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2 / 9

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3 / 9

4 / 9

BED
CM7891Q
#1 1pc #3 1pc#2 2pcs
#A 10pcs #B 10pcs #C 10pcs #E 6pcs
#4 2pcs
#5 1pc #7 3pcs#6 3pcs #8 2pcs
HeadboardPanel HB Leg (L&R) Footboard Side Rail
Headboard Support Bed Slat
Ø1/4
Support Leg 28x28x224mm Legs
#D 1pc
#F 8pcs #G 8pcs #H 8pcs
Bolt
Ø5/16" x 2"
Lock Washer
Ø5/16"
Flat Washer
Ø5/16"
Allen Key
4mm
Screw
#4 x 1-3/16"
Threaded Pins
Ø5/16" x 3-1/2" Half Moon Washer
Ø5/16''
Hex Nut
Ø5/16"
#I 1pc
Wrench
14mm
BED
CM7891EK/CK
#1 1pc #3 1pc
5 / 9
#2 2pcs
#A 10pcs #B 10pcs #C 10pcs #E 8pcs
#4 2pcs
#5 1pc #7 8pcs#6 4pcs #8 2pcs
HeadboardPanel HB Leg (L&R) Footboard Side Rail
Headboard Support Bed Slat
Ø1/4
Support Leg 28x28x224mm Legs
#D 1pc
#F 8pcs #G 8pcs #H 8pcs
Bolt
Ø5/16" x 2"
Lock Washer
Ø5/16"
Flat Washer
Ø5/16"
Allen Key
4mm
Screw
#4 x 1-3/16"
Threaded Pins
Ø5/16" x 3-1/2" Half Moon Washer
Ø5/16''
Hex Nut
Ø5/16"
#I 1pc
Wrench
14mm
5 / 9

6 / 9
Exploded View
#1
#2L
#2R
#3
#4
#4
#5
#6
#7
#8
6 / 9
Exploded View
#1
#2L
#2R
#3
#4
#4
#5
#6 #7
#8

ASSEMBLYINSTRUCTIONS
1
2
Part #1 x1pc
Part #2 x2pcs
7 / 9
Part #5 x1pc
Hardware
#A x10pcs
Hardware
#B x10pcs
Hardware
#C x10pcs
#A#B
#C
#D
#D
#A
#B
#C
#1
#2L
#5
#2R
#3
#8
Part #3 x1pc
Part #8 x2pcs
ASSEMBLYINSTRUCTIONS
1
2
Part #1 x1pc
Part #2 x2pcs
7 / 9
Part #5 x1pc
Hardware
#A x10pcs
Hardware
#B x10pcs
Hardware
#C x10pcs
#A#B
#C
#D
#D
#A
#B
#C
#1
#2L
#5
#2R
#3
#8
Part #3 x1pc
Part #8 x2pcs
Align HB legs (#2R/L) to the headboard (#1) and HB support (#5),
then secure by using bolts (#A) with washers (#B,C).
Attach FB legs (#8) to the footboard (#3).

ASSEMBLYINSTRUCTIONS
3
4
Part #4 x2pcs
8 / 9
Hardware#F x8pcs
Hardware#G x8pcs
Hardware#H x8pcs
#3
#4
#4
#1
#2L
#2R
#F
#H
#I
#G
Part #6 x1pc
Part #7 x1pc
#6
#7
x3
ASSEMBLY
INSTRUCTIONS
3
4
Part #4 x2pcs
8 / 9
Hardware#F x8pcs
Hardware#G x8pcs
Hardware#H x8pcs
Part #6 x1pc
Part #7 x2pcs
#4
#4
#1
#3
#F
#H
#I
#G
#6
#7
x 4
#7
Attach threaded studs (#F) to the headboard (#1) and footboard
(#3). Align side rails (#4) to the threaded studs (#F), then secure
by using hex nuts (#H) with washers (#G).
Attach support legs (#7) to the slats (#6), then
adjust leveler of the support legs (#7)
according to ground level.

ASSEMBLYINSTRUCTIONS
5
6
9 / 9
Hardware
#E x6pcs
#4
#4
#E
#6
ASSEMBLYINSTRUCTIONS
5
6
9 / 9
Hardware
#E x8pcs
#4
#4
#E
#6
Align slats (#6) to the side rails (#4), then secure by using screws (#E).

1 / 9
MODEL #
CM7891EK/CK
Questions?
GIVE US CALL: 1-888-980-5122
MON-FRI 8:30AM - 5:30PM (PST)
The Assembly Rating is a
5-point system showing the
level of effort needed to
assemble a specific product.
EASY DIFFICULT
VERSION# 19-07-26
2 - Persons
Recommended
Phillips Screwdriver
(Not Included)
(Included)
Allen Wrench

Thank you for your purchase!
We hope you enjoy this new addition to your home for many years to come.
Our commitment to providing quality products does not simply end when you purchase
our product. We fully stand behind our products from start to finish. Our customer
service department is available Monday – Friday 8:30 AM – 5:30 PM Pacific and can
help with assembly questions as well as, if necessary, replacing damaged or missing
parts. To help expedite our service, please have these assembly instructions readily
available, along with your order receipt.
E-MAIL
[e-mail]
Furniture of America
WEBSITE
www.foagroup.com
FOA Intro
FurnitureOfAmerica
foagroup
Monday to Friday
8:30AM- 5:30PM (PST)
Consumer Hotline
Toll-Free 1-888-980-5122
Prep Time!
Please review the assembly instructions and all
diagrams prior to assembling. Arrange parts as
recommended on Page 7 and group identical
hardware together to make assembling easier.
Check out our Quick Tips!
We recommend reviewing the pre-assembly
handouts. Even experts need a refresher now and
then!
Are you missing anything?
Double-check all parts, hardware and
accessories listed on Page 6 are
accounted for.
Should we send any replacements?
Are there any irregularities or flaws in the
parts? We can send replacements!
CHECK
BEFORE STARTING
2 / 9

PRE ASSEMBLY
INTRODUCTION
Suitable Location
Assembling near the area of the
intended location is highly
recommended.
Avoid Scratches
Use cardboard, blankets or a
carpeted area while assembling
furniture to prevent scratches.
Teamwork
ALWAYS have at least two people
to help with transporting and
assembling the product to avoid
potential injury and/or damage.
Flat Surface
Make sure the furniture rests on
a flat and level surface with each
leg evenly touching the floor.
Sufficient Space
Make sure you have enough
space to move around during the
assembly.
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
3 / 9

4 / 9

BED
CM7891EK/CK
#1 1pc #3 1pc
5 / 9
#2 2pcs
#A 10pcs #B 10pcs #C 10pcs #E 8pcs
#4 2pcs
#5 1pc #7 8pcs#6 4pcs #8 2pcs
HeadboardPanel HB Leg (L&R) Footboard Side Rail
Headboard Support Bed Slat
Ø1/4
Support Leg 28x28x224mm Legs
#D 1pc
#F 8pcs #G 8pcs #H 8pcs
Bolt
Ø5/16" x 2"
Lock Washer
Ø5/16"
Flat Washer
Ø5/16"
Allen Key
4mm
Screw
#4 x 1-3/16"
Threaded Pins
Ø5/16" x 3-1/2" Half Moon Washer
Ø5/16''
Hex Nut
Ø5/16"
#I 1pc
Wrench
14mm

6 / 9
Exploded View
#1
#2L
#2R
#3
#4
#4
#5
#6 #7
#8

ASSEMBLYINSTRUCTIONS
1
2
Part #1 x1pc
Part #2 x2pcs
7 / 9
Part #5 x1pc
Hardware
#A x10pcs
Hardware
#B x10pcs
Hardware
#C x10pcs
#A#B
#C
#D
#D
#A
#B
#C
#1
#2L
#5
#2R
#3
#8
Part #3 x1pc
Part #8 x2pcs
Align HB legs (#2R/L) to the headboard (#1) and HB support (#5), then secure
by using bolts (#A) with washers (#B,C).
Attach FB legs (#8) to the footboard (#3).

ASSEMBLYINSTRUCTIONS
3
4
Part #4 x2pcs
8 / 9
Hardware#F x8pcs
Hardware#G x8pcs
Hardware#H x8pcs
Part #6 x1pc
Part #7 x2pcs
#4
#4
#1
#3
#F
#H
#I
#G
#6
#7
x 4
#7
Attach threaded studs (#F) to the headboard (#1) and
footboard (#3). Align side rails (#4) to the threaded studs
(#F), then secure by using hex nuts (#H) with washers
(#G).
Attach support legs (#7) to the slats (#6), then
adjust leveler of the support legs (#7)
according to ground level.

ASSEMBLYINSTRUCTIONS
5
6
9 / 9
Hardware
#E x8pcs
#4
#4
#E
#6
Align slats (#6) to the side rails (#4), then secure by using screws (#E).