Furniture of America Horace CM4242-3PK User manual

Handle

Place the coffee table top (#1)
on a protected surface. Align
the coffee table legs (#4) to
the pre-drilled holes on the
corners of the coffee table top
(#2). Insert a bolt (#B) into
each corner and secure using
the Allen wrench (#A).
For knob assembly insert a plastic flat washer (#E)
onto the handle screw (#D). Then insert into pre-
drilled hole located on the drawer. Once inserted apply
the hex nut (#F), a plastic flat washer (#E), and finally
the handle (#C), in that order. Secure from within the
drawer using the Phillips screwdriver.
Insert the threaded end of the foot bead and
secure by hand. To tighten turn clockwise.

Place the end table top (#1)
on a protected surface. Align
the end table legs (#3) to the
pre-drilled holes on the corners
of the end table top (#1). Insert
a bolt (#B) into each corner and
secure using the Allen wrench (#A).
For knob assembly insert a plastic flat washer (#E)
onto the handle screw (#D). Then insert into pre-
drilled hole located on the drawer. Once inserted apply
the hex nut (#F), a plastic flat washer (#E), and finally
the handle (#C), in that order. Secure from within the
drawer using the Phillips screwdriver.
Insert the threaded end of the foot bead and
secure by hand. To tighten turn clockwise.