FWE ETC Series User manual

OPERATING
INSTRUCTIONS
ADJUSTABLE UPRIGHTS
FWE Parts Department:
www.FWEparts.com
Phone: [phone]
FAX: [phone]
ETC SERIES CABINETS

Upright
Assembly
consists of a
left side rack
and a
right side rack
Top Pin
Alignment
Holes
(in sets
of pairs)
Tray Slide
Mounting
Holes
(Refer to
Figure 4)
Tray
Slide
Bottom Pin
Alignment Holes
(in sets of pairs)
Upright
Assembly
“A”
(holds
left side
tray slides)
Upright
Assembly
“B”
(holds
right side
tray slides)
Tray
Slide
Description of the
ETC Adjustable Upright Assembly
Figure 1: Upright Assembly
with features identified.

Alignment Pins are mounted at the inside top panel
and at the inside bottom floor of each compartment, having
four (4) Alignment Pins total per each set of uprights.
(Location of the bottom Alignment Pins is shown in Figure 2.)
Position each Upright Assembly to fit your tray size
by choosing a set of Alignment Holes.
(See Figure 3 on the following page for tray sizes and positions.)
A1
A2
B2
B1
ETC Adjustable Upright Assembly
Mounts to Top and Bottom Alignment Pins
Figure 2: Upright Assembly is mounted to cabinet
Alignment Pins, with the location of the
bottom pins detailed.
Location of the
bottom
Alignment Pins
for Upright
Assembly

Spacing the Tray Slides
to meet your capacities:
Tray Slides can be positioned
at a choice of .75” increments
for greater flexibility.
Choosing the Position of your Upright Assembly to fit your tray size:
1.5"
2.25"
3.0"
3.75"
4.5"
5.25"
6.0"
6.75"
16" x 22" Trays
15" x 20" Trays
14" x 18" Trays
Alignment
Hole
Outward
Position
Alignment
Hole
Inward
Position
Both uprights located
in outward position.
One upright in
outward position,
one upright in
inward position.
Both uprights located
in inward position.
.75" INCREMENTS
5.25" Spacing
5.25" Spacing
Figure 4: Side View of ETC-16.
Figure 3: Place uprights to meet
your tray size by positioning the
outward or inward Alignment Holes
upon the Alignment Pins.
1 2 3
1
2
3
MODEL
TRAY CAPACITIES AT SPACINGS OF:
NUMBER
3" 3.75" 4.5" 5.25" 6" 6.75"
ETC-12 20 16 14 12 10 10
ETC-16 28 22 18 16 14 12
ETC-18 30 24 21 18 15 15
ETC-20 34 28 24 20 18 16
ETC-24 42 33 27 24 21 18
ETC-30 51 42 36 30 27 24
Sets of tray slides are provided for 5.25" spacings
to meet these capacities.