Fxlion BP-7S500 User manual

25.2V 19.4Ah 489Wh
BP-7S500
25.2V/10.0A (Max)
25.2V/20A/500W (Max)
-20~55℃
0~45℃
161.7mm(L)×104.7mm(W)×105.5mm(H)
2506g
IP54
Capacity
D-tap*2 Output
Battery Output
Discharge Temperature
Weight
Waterproof Grade
Charge Temperature
Dimension
BP-7S500
User Manual
High Power Waterproof Battery
Thanks for choosing Fxlion products!
Please read this user manual before use to enable you could properly use, storage and
maintenance of the products.
Packing List: 1.Battery BP-7S500*1 2.User Manual *1
I Product Appearance
Ⅱ Battery Basic Features
Ⅲ Specification Ⅳ Cautions !
•High power intelligent protection chip is applied, and
t h e b a t t e r y h a s o v e r c h a r g e , o v e r d i s c h a r g e ,
te mpe rat ure and o ve r-cu rre nt pr ot e ct i on . Wit h
overload self recovery design.
•Use high rate Li-ion battery cells, it can discharge at
a high rate up to 20A, and compatible with 500W
high-power equipment.
•Compact structural design, integrated shell and
output terminal design, ultra-high volume energy
density ratio, truly achieving the ultimate high
capacity of Li-ion battery within a small volume.
•Ip54 waterproof grade, perfectly compatible with the
demand of LED lights, cameras, and other film and
television equipment with waterproof requirements.
• T h e w a t e r p r o o f d e s i g n a n d 2 0 A h i g h - p o w e r
discharge meet the demand for high-power LED lights
in the market, especially for LED lights above 500W
which can use portable 26V V-mount battery directly.
•The shell is made of special materials, which is
shockproof can meet requirements of daily outdoor
Li-ion battery use.
•5-Level LED indicators.
•Optional charger: suitable for 29.4V chargers, it is
recommended to use a FXLION charger with a
charging power of 29.4V/4A or above.
•2*D-Tap design, 26V output voltage same as battery,
each with an output power of up to 10A. High Power
output can synchronous power external equipment or
high power external equipment while outputting
battery.
29.4V
Full Power Voltage
•Avoid strong impact.
•Must accordance with instructions to use and store.
•Keep away from children.
•Waterproof grade IP54, able to work just in small
rain.
•Do not heated or disassemble.
•Battery should be charged to 50% power status
when need long time storage, charge and discharge
once every three months.
• P l e a s e c h a r g e b y F x l i o n c h a rg e r o r F x l i o n
recommended charger.
•Do not put battery into water or fire.
•Waterproof grade is tested in laboratory.
•Avoid short-circuit.

Model Production Date
Serial Number
at [phone] for assistance.
Strict quality control procedures were done to every Fxlion product before it leaves the factory.
Please contact local Fxlion distributor or call our service center
Product Production Information
Fxlion Electronic Co., Ltd.
WEB：www.fxlion.net
Email：[email protected]
ⅤStorage and Transportation ⅥMaintenance and After-sales Service
Ⅶ The warranty will not cover the following cases.
•Battery capacity decrease because not accordance
with instruction to use and store, make sure to charge
and discharge once every three months, and keep
battery capacity 50% for store.
•Disassemble or repair by non-professionals, or
failure by dropping.
•Damage caused by man-made improper use.
•Force majeure: Do not work or parts damage caused
by earthquake, fires and other natural disasters or
accidents.
•Battery unable to charge or full charged because of
long term use of non Fxlion charger or charger Fxlion
doesn’t recommend.
•Non Fxlion products, or out of warranty period.
•Damage to device because of incorrect battery
voltage selection.
•Non Fxlion tieline and power supply connection
caused failure.
•The phenomenon of a natural decrease in battery
capacity caused by multiple charging and discharging
cycles after a period of use.
Battery should be charged to 50% power status when need long term
storage, charge and discharge once every three months.
Place in a dry and cool places, avoid touching corrosive substances
and keep away from fire.
Storage temperature: -20℃〜+25℃ (12 months)，-20℃〜+45℃ (3
months)，-20℃〜+60℃ (1 month). Storage humidity：≤75%RH .
Batteries should be packed into boxes for transport which should
prevent severe vibration, shock or extrusion, sun exposed and rain.
transportation could be use cars, trains ,boats and airplane.
Battery warranty period is one year. Battery shell, rubber
cap and V-lock part are easily-worn parts which warranty
period is 3 months.
Warranty period: start from the date of purchase with the
record on warranty card and purchase/sales invoice.