GABBY ELBA SCH-170430 User manual

ASSEMBLY INSTRUCTION
ELBA CABINET
SCH-170430
Component parts
A
Wooden Shelf
2 pcs
B
Handle
2 pcs
C
Hanging Rod
1 pc
Date - Nov 28, 2022 Page 1 of 5

Tool Required (Not Included)
Screwdriver
1 pc
Hardware
C
Pin Shelf
8 pcs
D
Bolt
4 pcs
E
An�-Tip Kit
2 set
Page 2 of 5Date - Nov 28, 2022

Important Notes:
For Bolt: Insert bolt into female insert in both handles (B) and turn the bolt (D)
clockwise using Philip screwdriver un�l �ght, do the same steps to the remaining
bolts.
For Pin Shelf: Insert each nail glide (C) into each female insert of the inside of the
cabinet and put the wood shelf (A) on top of the nail glides.
Step 1 (Bolt)
Step 2 (Bolt)
Step 1 (Pin Shelf)
Step 2 (Pin Shelf)
Page 3 of 5Date - Nov 28, 2022

Important Notes:
For Leveler: If the oor is uneven adjust the levelers located at the underside of
the feet, to do this lithe side that need to be elevated to provide access to the
levelers, turn the leveler unequate contact with the oor.
For An�-Tip Kit: ach the brackets (C) horizontally to the back of the cabinet
using the small screws (A). Screw the remaining brackets (C) vercally 1 inch below
the brackets aached to the cabinet using the large screws (B). The large screws
(B) should be screwed into a stud in the wall. Align the brackets cally and
string in the retenon belt (D). Crm strap is securely laced and locked.
Step 1 (Leveler)
Step 1 (An-Tip Kit)
Step 2 (Leveler)
Step 2 (An-Tip Kit)
Page 4 of 5Date - Nov 28, 2022

Important Notes: Maximum weight 100 lbs.
For Hanging Rod: Prepare the hanging rod provided. Insert one of both sides first
to assemble the hanging rod in hanging rod holder. Then insert the other side. The
cabinet is ready to use.
Step 1 (Hanging Rod)
Step 3 (Hanging Rod)
Step 2 (Hanging Rod)
Step 4 (Hanging Rod)
We hope you enjoy this Gabby purchase.
Date - Nov 28, 2022 Page 5 of 5