GABBY DORA SCH-166280 User manual

Page 1 of 2
Hardware Include :
Part Description Qty
Screw Ø8 x 2"
Bracket
Retention Belt
1 pcs
1 pcs
2 pcs
1 pc
A
No
B
C
D
Fisher S8 1 pcE
Screw Ø8 x 3/4"
Body
Parts Include :
1
Description
No Qty
1 pc
G A B B Y R
SCH-166280 DORA CHEST
ASSEMBLY INSTRUCTION
Date 8-4-2020

G A B B Y R
·STEP 1:
If the floor uneven the levelers located at the underside of the Leg, to do this lift Up the side that need
to be elevated to provide access to the levelers, turn the leveler until adequate contact with the floor
as shown FIG.1
SCH-166280 DORA CHEST
ASSEMBLY INSTRUCTION
·STEP 2 :
The Fisher (E) (wall insert) should be used in conjunction with using a wall stud as anchor.
The combination will make the unit very stable. Attach one of the Brackets (C) horizontally to the top
of the back of the Desk using the Small Screws (A).Screw the remaining Bracket (C) vertically 1 inch
below the brackets attached to the Desk using the large screws (B). The Large Screws (B) should be
screwed into a stud in the wall. Align the Brackets vertically and string in the Retention Belt (D).
Confirm Strap is securely laced and locked as shown FIG.2.
Page 2 of 2
Date 8-4-2020