Gama Sonic 214001 User manual

STAINLESS STEEL
BOLLARD SOLAR LAMP
with EZ Anchor
Part#: 214001/214801
Version 1.2 Instruction Manual
US Patent #9458970

SolarLampLocation:
For optimum light duration throughout the night, it is very
important to place your solar light in a spot where it will receive
the maximum amount of direct sunlight throughout the day.
Note: For best results, the solar light must be charged on the
“ON” position for two sunny days.
page 2
Thank you for your purchase. GAMA SONIC
®
solar charged accent lighting eliminates the
problems associated with most solar lighting available today.
GAMA SONIC
®
solar charged lights are brighter and last all night with a typical solar
charge. Unique design, superior light output, and numerous installation options confirm
the outstanding value of our product.
GAMA SONIC
®
has been recognized as a worldwide leader in the lighting industry for over
20 years. The company also offers unique multi-purpose rechargeable products that range
from party lights to emergency lighting products.
For technical assistance and more information
call our Toll-Free number:
800-835-4113 (only within the US)
Or
visit our website or download the latest version
of your instruction manual:
www.gamasonic.com Or
www.gamasonic.com/user-guides
Please read the instruction manual carefully to obtain the best results from your purchase.
Adaptor Auger
Ground
Stop
Ring
Level Tool
Turning
Bar

page 3
1. Remove the Adaptor from the base by
unscrewing the two silver caps from the
bottom of the Bollard Pole (A).
2. Secure the Ring Assembly (B) to the Bollard
Pole (A) using the glass and twisting it
clockwise.
NOTE: If the two parts do not easily fit, try
inserting the glass into the Bollard Pole at an
angle until the glass starts to thread in.
3. Insert the GS Solar LED Bulb into the Top (A)
by screwing it in clockwise.
4. Set the operation switch to one of the
following settings:
High = Brighter light output
Low = Softer light, longer duration.
5. Connect the Top (A) to the Ring Assembly
(B) by twisting clockwise.
6. The Solar light will automatically operate
from dusk to dawn.
1. Insert the Auger bit into the Adaptor and
secure it from the bottom using the four
supplied screws.
2. Place the Turning bar in the hole through
the Auger bit and begin turning the Auger
clockwise in the desired mounting location.
3. Apply downward pressure while turning
clockwise and occasionally check the level in
the Auger so it is vertical.
4. Stop turning once the Ground Stop Ring is
flush with the ground.
5. Remove the turning bar and place the
assembled lamp on the Adaptor.
6. Secure the lamp with the two silver caps.
1. Using the Adaptor as a template, drill two
holes no larger than the anchors in the
desired mounting location.
2. Insert the anchors in the holes and secure
the Adaptor using the provided screws.
3. Attach the assembled lamp to the Adaptor
and secure using the silver caps.
Operation and assembly instructions.
Flat surface installation Instruction
EZ Anchor installation
C.
TOP
B.
RING
ASSEMBLY
A.
BOLLARD
POLE
WARNING: GAMA SONIC®Light bulbs are not to be used
in other electrical sockets. They are low-voltage light
bulbs that are built and designed for our products only!

page4
ReplacingtheBatteries
Replacement batteries are available
at www.gamasonic.com or via our Toll free number: [phone]
(After several years of use, the batteries may need replacing).
1. Remove the Top (A) from the Ring Assembly (B) by twisting counter clockwise.
2. Switch the lamp OFF and remove the bulb.
3. Unscrew and remove the battery compartment covers.
4. Remove the batteries and unclip the connectors.
5. Make sure the new batteries are high quality 3.2V/1000mAh Li-Ion rechargeable batteries
with a matching connector (Item# GS32V10).
6. Clip in the new batteries and install into the compartment.
7. Reassemble the lamp by reversing steps 1-3.
WARNING: Do not dispose of Li-Ion batteries in the regular trash, municipal waste stream or by
fire as batteries may leak or explode. Do not open, short circuit, or mutilate batteries as injury may
occur. Preserve our environment by recycling Li-Ion batteries or disposing of them in accordance
with local, State and federal regulations. Do not mix old and new batteries.
Maintenance
Clean the solar module regularly with a damp towel to guarantee optimum performance
of the solar panel. Do not use any type of solvent for cleaning and be careful not to put too
much pressure on the module while cleaning.
Trouble Shooting
If your solar charged light does not come on at dusk despite
observance of all the instructions, please try the following steps:
1. Make sure that the solar light is not being affected by any other light source.
2. Ensure the solar light is not positioned in the shade during the day.
3. Make sure the switch in the lamp head is in the ”LOW” or "HIGH" position.
4. Check that the batteries are installed correctly.
NOTE: The performance of the solar light will vary with the time of year. It will deliver
longer duration when it has had a full day in the sun rather than a day in overcast
weather.
WINTERTIME TIPS: For optimal performance, be sure to remove any snow or debris
accumulation from solar panel(s). A solar panel free of debris will charge the batteries
much more efficiently.
WARNING: Please keep out of reach of children.