Gama Sonic GS-8F User manual

1
Introduction
Thank you for your purchase! GAMA SONIC®solar charged accent lighting eliminates
the problems associated with most solar lighting available today. GAMA SONIC®solar
charged lights are brighter and last all night with a typical solar charge. Unique
design, superior light output and numerous installation options confirm the
outstanding value of our product.
GAMA SONIC®has been recognized as a worldwide leader in the lighting industry for
over 20 years. The company also offers unique multi-purpose rechargeable products
that range from party lights to emergency lighting products.
Technical Assistance/Warranty Claims/Replacement Parts
Toll Free Number: [phone] (only within the US) or www.gamasonic.com
Visit our website or download the latest version of your instruction manual:
www.gamasonic.com or www.gamasonic.com/user-guides
Please read the instruction manual carefully to obtain the best results from your
purchase.
Aspen Solar Post Lamp
US Patent # 94558970
Instruction Manual
Model: GS-8F

2
WARNING: GAMA SONIC® Light bulbs are built and designed for Gama Sonic products only.
They are not designed to be used in other electrical sockets. For the same reason, regular AC
and/or Low Voltage bulbs cannot be used in Gama Sonic products.
NOTE: If you are replacing an existing gas/electric post light, you must consult a
certified technician to cancel them before installation.
Solar Lamp Location
For optimum light duration throughout the night, it is very important to mount
your solar lamp post in a spot where it will receive the maximum amount of
direct sunlight throughout the day. The solar light must be charged in full sun for
two days in the “ON” position for the best results.
NOTE: The following steps are for reference only. Consult your local hardware store
for the best installation method for your chosen surface.
Assembly Instructions
1. Using a screwdriver remove the four screws
attaching the top and remove the top (Fig. 1).
2. Screw in provided A-60 Gama Sonic bulb while gripping the base only see
(Fig. 2).
3. Reverse Step 1 and re-attach top and screws
accordingly.
(Fig. 1)
(Fig. 2)

3
NOTE: The following steps are for reference only. Consult your local hardware store
for the best installation method for your surface.
Installation Instructions
1. Place the assembled light fixture on top of your existing
3” post and hand tighten the 3 provided screws to secure
the lamp.
Note: Installing the light on or near a wall may limit the
functionality of the solar panel for sun exposure. Make sure
the lamp is mounted so direct sun exposure is available.
Operation Instructions
1. Turn the external operation switch to the Low or High
position (Fig. 3).
2. according to your preferences:
a. Low: For softer light and longer duration.
b. High: For brighter light output.
2. The solar lamp will automatically operate at dusk.
Replacing the Batteries
(After several years of use, the batteries may need replacing)
1. Make sure the ON/OFF switch is in the “OFF”
position (0).
2. Unscrew the four screws on the underside of
the lamp top to detach it from the lamp.
3. Unscrew the battery compartment’s screws
located on the silver reflector and remove
the compartment doors.
4. Unclip the battery connectors and remove
the old batteries. Make sure the new
batteries are high quality –2 Li-Ion Battery
packs (3.2 Volt / 1500 mAh) with matching
connector (Fig. 4).
5. Install the new batteries into the battery
compartment.
6. Reassemble the unit by reversing the above procedure.
(Fig. 4)
(Fig. 3)
Replacement Solar LED Bulb and batteries are available at www.gamasonic.com
or via our Toll free number: [phone]

4
Replacing the GS Solar LED Light Bulb
The GS Solar LED Light Bulb is designed to last up to 10 years, however if it is not
working, or if you want to use a different color temperature bulb, you can replace it
with a new GAMA SONIC Solar LED Bulb.
1. Detach the upper part of the lamp as shown in (Fig. 1).
2. Make sure the operation switch is in the OFF (“O”) position.
4. Remove the existing A-60 GS Solar LED Light Bulb by turning it
counterclockwise while gripping the base only see (Fig. 2).
3. Install the new GS Solar LED Light Bulb by turning into the bulb socket
clockwise while gripping the base only see (Fig. 2).
4. Reassemble the unit by reversing the above procedure
Maintenance
Clean the solar panels regularly with a damp towel to guarantee optimum
performance. Do not use any type of solvent for cleaning and be careful not to put
too much pressure on the solar panels while cleaning.
Trouble Shooting
If your solar charged light does not come on at dusk despite observance of all the
instructions, please try the following steps:
1. Make sure that the solar lamp post is not being affected by any other
light source.
2. Ensure the solar lamp post is not positioned in the shade during the
day.
3. Make sure the switch on the lamp head is in either the Low or High
position.
4. Check that the batteries are installed correctly.
NOTE: The performance of the solar lamp post will vary with the time of year. It will
deliver more light when it has had a full day in the sun rather than a day in overcast
weather.
WINTERTIME TIPS: For optimal performance, be sure to remove any snow or debris
accumulation from solar panel(s). A solar panel free of debris will charge the
batteries much more efficiently.
WARNING: Please keep out of reach of children. Do not dispose of Li-Ion battery in
the regular trash, municipal waste stream or by fire as batteries may leak or explode.
Do not open, short circuit, or mutilate batteries as injury may occur. Preserve our
environment by recycling Li-Ion batteries or disposing of them in accordance with
local, state and federal regulations. Do not mix old and new batteries.