Rev. D INST-594
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
POWER SUPPLY
STOWED
STYLUS HOLDER
CABLE TIE POINTS
© Copyright 2013 Gamber-Johnson, LLC
INSTALLATION INSTRUCTIONS
FormProduct Revision
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
Printing Spec:
PS-001
INSTRUCTION SHEET - FZ-A1 OFFICE DOCK
7160-0471, 7160-0471-P
This device is an office docking s a ion for your he Panasonic FZ-A1 Toughpad.
Use:
Connec he dock o power using he power supply ha was provided wi h he able . 1.
The power supply brick can be s owed in he well in he back of he dock for s orage.
Connec E herne and USB devices o he dock as desired. Two cable ie poin s are 2.
provided for cable managemen .
Make sure power connec or door on he able is closed3.
Wi h he able perpendicular o he able and h docking connec er facing down, 4.
place he able in o he dock hen lean he able back on o he res .
To remove he able , rock he able forward ill i is perpendicular o he able hen lif 5.
he able s raigh ou .
For addi ional securi y he dock can be bol ed down and he able secured wi h a 6.
Kensing on lock
DOWN
THEN ROTATE BACK
