Gamber Johnson 7160-1005 User manual

Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
REV. B
INST-805
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
U.S. PATENT No. 8,315,048
INSTALLATION INSTRUCTIONS
Product Revision Form
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
Printing Spec:
PS-004
SAMSUNG, TABACTIVE 2, FULL DOCK
7160-1005, 7160-1029, 7160-1137
This instruction sheet is for the Samsung Galaxy Tab Active 2 docking station only.
For instructions on features, set-up, and operation of the Galaxy Tab Active 2
tablet, please refer to the manual provided by Samsung with the tablet.
This docking station is designed to be used with a variety of Gamber-Johnson
mounting systems. Installation instructions for other Gamber-Johnson products
are provided with each individual product.
© Copyright 2017 Gamber-Johnson, LLC
1/5

IMPORTANT SAFETY INFORMATION FOR INSTALLERS
Safety is dependent on the proper installation and servicing of this docking station. It is
important to read and follow all instructions before installing this product.
To properly install a Gamber-Johnson docking station you must have a good understanding of
automotive electrical procedures and systems, along with proficiency in the installation and
service of aftermarket vehicle equipment.
There are no adjustments required at any time of the electrical components within the
docking station. Opening the docking station will void the product warranty.
During Installation:
DO NOT connect this docking station to the vehicle battery until:
All other electrical connections are made 1.
Mounting of all components is complete 2.
Verification that no shorts exist in the entire system 3.
DO NOT install equipment or route wiring or cords in the deployment path of any air bag.
When drilling into the vehicle, DO make sure that both sides of the surface are clear of
anything that could be damaged.
CAUTION: If wiring is shorted to the frame, high current conductors can cause hazardous
sparks resulting in electrical fires or flying molten metal.
After installation:
Test the docking station to ensure that it is working properly.
File these instructions in a safe place and refer to them when performing maintenance or re-
installing.
WARNING : Failure to follow all safety precautions and instructions may result in property
damage, serious injury, or death.
PRE-INSTALLATION RECOMMENDATOINS
Conduct a "Bench Test"
Gamber-Johnson strongly advises a "bench test" be conducted to verify all
electronic and software issues are resolved prior to installation:
Make sure the computer is operational by itself. 1.
Insert computer into the docking station and verify that the computer is 2.
operating in the dock and battery is charging.
Gamber-Johnson recommends positioning of all mounts and equipment in the
vehicle prior to the actual install to verify that mounting locations are safe and
practical.
2/5

Release Button
(User Interface)
Barrel Key Lock
Docking Connector
Camera Access
(On Tablet)
Part#/Serial# Label
USB 1.1
Warranty Label
VESA 75mm Hole Pattern
#8-32 x 0.500" hardware provided
AMPS Hole Pattern
#8-32 x 0.500" hardware provided
Contact Friendly Edges
Power Cable ,
4' length, 3A
Cig Adapter Lead (7160-1005)
Bare Wire Lead (7160-1029)
MP205 Connector (7160-1137)
SAMSUNG TAB ACTIVE DOCK FEATURE IDENTIFICATON
3/5
Alignment Walls
Provides docking guidance
and connector protection,
prevents mis-docking
Cable Tie Slots
USB-C Power
Port Blocker

"LOCKED"
Position
DOCKING AND UNDOCKING THE TABLET
TO DOCK THE COMPUTER
1. Insert the bottom of the tablet into the docking station.
Then rotate the top of the tablet under the blue latch until the tablet is resting inside the main
housing. The blue latch will spring down in front of the tablet to hold it in place.
2. (Optional) For added security, with the dock in the "Latched" position, turn the lock to the
"LOCKED" position (Counter Clockwise).
TO UNDOCK THE COMPUTER
1. Turn the lock to the "UNLOCKED" position (Clockwise).
2. Push upward on the Release Button with the thumb and pull outward on the top of the tablet
until it clears the blue latch. Lift the tablet out of the dock.
5/6

Gamber-Johnson LLC, 3001 Borham Ave.,
Stevens Point, WI, 54481, USA, 715-344-3482
Regulatory Certification Information
Regulatory Model #: 7160-1005
GJ Model #'s: 7160-1005-00, 7160-1029-00
Descriptions: Dock-Samsung-TabActive 2 No RF, CIG Adapter Lead
Dock-Samsung-TabActive 2 No RF, Bare Wire Lead
Certifications:
EN 55032:2012 CISPR 22:2008 Class A •
EN 50581:2012 •
IEC 60950-1:/A1:2009 •
EN 60950-1/A12:2011 •
CAN/CSA C22.2 No. 60950-1/A1:2011 •
UL 60950-1/R:2011-12 •
E/ECE/324/Add. 9: Regulation N0. 10 Revison 5 •
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions. (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interfernece that may cause undesired operation.
10R-05 XXXX
5/5