Game ready Med4 Elite User manual

x12
x8
x4
x4
x8
x16
1Remove the twelve (12) screws that
secure the top panel in place. Carefully
lift the top panel off of the crate.
NOTE: Screw location approximated in
green, red, blue, orange, purple, and
gray in each drawing.
REMOVE TOP PANEL
4
Remove the four (4) screws (two from each side) that secure the top braces in
place. Carefully lift the braces away from the Control Unit.
REMOVE TOP BRACES
6
The Accessory Kit box is located at the back of the Control Unit. Carefully detach it
from the plastic protecting the Control Unit. Set it aside in a safe place. You will
need the contents inside to begin setting up the Med4 Elite.
REMOVE ACCESSORY KIT BOX
7
Remove the four (4) screws (two from
each side) that join the bottom braces
together. Carefully lift them
away from the Control Unit.
REMOVE BOTTOM BRACES
8
Remove the plastic protective layer
and dispose of it.
REMOVE PLASTIC
COVER
9
Carefully set the Control Unit off of the base of the crate. We recommend two
people perform this step to prevent damage to the Control Unit. Do not tip the
Control Unit.
SET CONTROL UNIT OFF BASE OF CRATE
10
Use the Quick Start located inside the Accessory Kit box for instruction on the initial
setup. We recommend saving the accessory box as storage for the drain hoses,
USB flash drive, and Med4 Elite documenation. The Quick Reference cards are
designed to hang from the handles of the Med4 Elite Control Unit.
Contact Game Ready Technical Support at:
GETTING STARTED
5Remove the eight (8) remaining screws (four from each side) that secure the side
panels in place. Carefully lift the side panels away from the crate and set aside.
REMOVE SIDE PANELS
2
Remove the sixteen (16) screws (eight from each side) along each vertical
edge of the side panels. DO NOT remove the interior or bottom screws from
the side panel until instructed to do so.
REMOVE VERTICAL SCREWS
FROM BOTH SIDE PANELS
3Remove the
remaining eight (8)
screws (four from
each panel) that
secure the front
and back panels in
place.
Carefully lift each
panel away from
the crate and set
aside.
REMOVE FRONT & BACK PANELS
(1.888.426.3732) or 1.510.868.2100.
From outside the U.S., contact your local distributor.
1.888.GameReady
TOP
RIGHT SIDE LEFT SIDE
RIGHT SIDE LEFT SIDE
BACKFRONT
Welcome to Med4 Elite. These simple steps will guide
you through uncrating the Med4 Elite. Follow these steps
to ensure a safe and speedy setup. We recommend having
two people uncrate the Med4 Elite. To get started, you will
need a power/battery operated phillips screwdriver.

UNCRATING GUIDE
172 lb / 78 kg 130 lb / 59 kg
TOTAL
WEIGHT:
302 lb / 137 kg
© 2017 CoolSystems, Inc. All rights reserved.
Med4 Elite Uncrating Guide PN 705153 Rev B
Contact Game Ready Technical Support at:
(1.888.426.3732) or 1.510.868.2100.
From outside the U.S., contact your local distributor.
1.888.GameReady
COOLSYSTEMS®,INC.
1800 Sutter Street, Suite 500
Concord, CA 94520 USA
1.888.GAMEREADY +1.510.868.2100
www.gameready.com
www.gameready.com/patents
EMERGO EUROPE
Prinsessegracht 20
2514 AP The Hague
The Netherlands
EMERGO AUSTRALIA
201 Sussex Street
Darling Park, Tower II, Level 20
Sydney NSW 2000
Australia
0086