GameSir G4 pro User manual

Gaming is winning.™
User Manual
GameSir-G4 pro

SYSTEM REQUIREMENTS
Android 8.0 or above
iOS 13 or above
Windows 7/8/10
Mac OS
DEVICE LAYOUT
Receiver storage Phone holder
Turbo buttonRight joystick Screenshot button ABXY button Charging indicator
Home buttonLeft joystick D-Pad Select button Start button
L1 button R2 button R1 button
L2 button Type-C Connector
M
BATTERY STATUS
Charging indicator Description
CONNECT TO PC VIA USB RECEIVER OR USB CABLE
1.Long press the X + HOME until the controller is turned on
2. Plug the USB receiver into the USB port of your computer or use the USB cable to connect the controller to the
computer USB port
3.The next time you connect to the computer, as long as you press and hold the HOME for 2 seconds to turn it on,
the controller will auto connect to computer
Note: If the controller has switched to other modes, you need to use the key combination again to reboot.
If you still cannot connect after inserting the USB receiver, press and hold the G+S button for 5 seconds,
and the controller will re-pair with the receiver after it restarts automatically.
HOME button indicator
Flashes in green
Flashes quickly in green
Stays in green Connected
Pairing
Description
Connecting
HOW TO USE THE PHONE HOLDER
Push the phone holder up from the bottom of the controller to expand it.
HOW TO CHARGE THE CONTROLLER
Use the charging cable to connect the Type-C interface on the top of the controller to the USB charging port
TURN OFF
Long press the HOME button for 5 seconds to turn off the G4 pro.
In use, 100% remaining
In use, 75% remaining
In use, 50% remaining
In use, 25% remaining
Red light flashes quickly
Red light flashes slowly
Red light stays on Fully charged
Less than 15%
Charging
X+HOME

SYSTEM REQUIREMENTS
Android 8.0 or above
iOS 13 or above
Windows 7/8/10
Mac OS
DEVICE LAYOUT
Receiver storage Phone holder
Turbo buttonRight joystick Screenshot button ABXY button Charging indicator
Home buttonLeft joystick D-Pad Select button Start button
L1 button R2 button R1 button
L2 button Type-C Connector
M
BATTERY STATUS
Charging indicator Description
CONNECT TO PC VIA USB RECEIVER OR USB CABLE
1.Long press the X + HOME until the controller is turned on
2. Plug the USB receiver into the USB port of your computer or use the USB cable to connect the controller to the
computer USB port
3.The next time you connect to the computer, as long as you press and hold the HOME for 2 seconds to turn it on,
the controller will auto connect to computer
Note: If the controller has switched to other modes, you need to use the key combination again to reboot.
If you still cannot connect after inserting the USB receiver, press and hold the G+S button for 5 seconds,
and the controller will re-pair with the receiver after it restarts automatically.
HOME button indicator
Flashes in green
Flashes quickly in green
Stays in green Connected
Pairing
Description
Connecting
HOW TO USE THE PHONE HOLDER
Push the phone holder up from the bottom of the controller to expand it.
HOW TO CHARGE THE CONTROLLER
Use the charging cable to connect the Type-C interface on the top of the controller to the USB charging port
TURN OFF
Long press the HOME button for 5 seconds to turn off the G4 pro.
In use, 100% remaining
In use, 75% remaining
In use, 50% remaining
In use, 25% remaining
Red light flashes quickly
Red light flashes slowly
Red light stays on Fully charged
Less than 15%
Charging
X+HOME

Play Apple Arcade and MFi games
1. Press the B + HOME until the controller is turned on
2. Turn on the Bluetooth, search for the Xbox Wireless Controller gamepad, click and pair.
3. The next time you connect, as long as you press and hold the HOME for 2 seconds to turn it on, the controller
will auto connect to mobile phone
Note: If the gamepad needs to be switched to another mode, you need to turn off the gamepad and then use the
key combination to turn it on again. Then turn on the phone's Bluetooth to search for the Xbox Wireless Controller
and pair.
If the iPhone ignores/cancel the Bluetooth pairing of the gamepad or connects to a new iPhone, you need
to press and hold the G+S button for 5 seconds, and the gamepad will re-pair with the iPhone after it restarts
automatically. Turn on the phone's Bluetooth, search for the Xbox Wireless Controller, click and pair.
To learn more about Android controller-supported games, Apple Arcade games, MFi games and how to use
GameSir G4 pro,please scan the following QR code or refer to the online advanced user guide.
Refers to mobile games that support using a gamepad
HOME button indicator
Flashes in purple
Flashes quickly in purple
Stays in purple Connected
Pairing
Description
Connecting
B+HOME
CONNECT TO NINTENDO SWITCH OR SWITCH LITE VIA BLUETOOTH
1. Press the A + HOME until the controller is turned on
2. Turn on the Bluetooth, search for Gamesir-G4pro gamepad, click and pair.
3. The next time you connect, as long as you press and hold the HOME for 2 seconds to turn it on, the controller
will auto connect to mobile phone
Note:If the gamepad needs to be switched to another mode, you need to turn off the gamepad and then use the
key combination to turn it on again. Then turn on the mobile phone Bluetooth to search for Gamesir-G4pro and pair.
If the Android phone ignores/cancel the Bluetooth pairing of the gamepad or connects to a new Android
phone, you need to press and hold the G+S button for 5 seconds, and the gamepad will re-pair with the Android
phone after it restarts automatically. Turn on the phone's Bluetooth, search for the Gamesir-G4pro, click and pair.
CONNECT TO MOBILE PHONE VIA BLUETOOTH
Play Android controller-supported games
Refers to mobile games that support using a gamepad
1. Go to the home page of the Switch, and click: Controllers——change the grip / order and enter the pairing
interface
2. Press and hold the Y + HOME until the controller is turned on
3. The controller will automatically pair with Switch or Switch Lite
4. The next time you connect to Switch or Switch Lite, as long as you press and hold the HOME for 2 seconds to
turn it on, the controller will auto connect to Switch or Switch Lite
Note: If you need to switch the gamepad to other modes, go to the Switch homepage, and click Controller—>
Change the grip/order to enter the pairing page. Turn off the gamepad and press the key combination to turn it
on and pair it with the Switch.
If you need to cancel the pairing with the current gamepad for the Switch or the controller needs to be
connected to the new Switch, please go to the Switch homepage, click in order: Controller—>Change the grip/order,
and enter the pairing page. Press and hold the G+S button of the gamepad for 5 seconds, and the controller will
re-pair with the Switch after it auto restarts.
HOME button indicator
Flashes in red
Flashes quickly in red
Satys in red Connected
Pairing
Description
Connecting
HOME button indicator
Flashes in blue
Flashes quickly in blue
Stays in blue Connected
Pairing
Description
Connecting
Y+HOME
A+HOME
UPGRADE THE GAMEPAD VIA THE MOBILE APP
ONLINE TUTORIAL
The GameSir mobile app can provide firmware upgrading and other functions.
Please scan the QR code to download

Play Apple Arcade and MFi games
1. Press the B + HOME until the controller is turned on
2. Turn on the Bluetooth, search for the Xbox Wireless Controller gamepad, click and pair.
3. The next time you connect, as long as you press and hold the HOME for 2 seconds to turn it on, the controller
will auto connect to mobile phone
Note: If the gamepad needs to be switched to another mode, you need to turn off the gamepad and then use the
key combination to turn it on again. Then turn on the phone's Bluetooth to search for the Xbox Wireless Controller
and pair.
If the iPhone ignores/cancel the Bluetooth pairing of the gamepad or connects to a new iPhone, you need
to press and hold the G+S button for 5 seconds, and the gamepad will re-pair with the iPhone after it restarts
automatically. Turn on the phone's Bluetooth, search for the Xbox Wireless Controller, click and pair.
To learn more about Android controller-supported games, Apple Arcade games, MFi games and how to use
GameSir G4 pro,please scan the following QR code or refer to the online advanced user guide.
Refers to mobile games that support using a gamepad
HOME button indicator
Flashes in purple
Flashes quickly in purple
Stays in purple Connected
Pairing
Description
Connecting
B+HOME
CONNECT TO NINTENDO SWITCH OR SWITCH LITE VIA BLUETOOTH
1. Press the A + HOME until the controller is turned on
2. Turn on the Bluetooth, search for Gamesir-G4pro gamepad, click and pair.
3. The next time you connect, as long as you press and hold the HOME for 2 seconds to turn it on, the controller
will auto connect to mobile phone
Note:If the gamepad needs to be switched to another mode, you need to turn off the gamepad and then use the
key combination to turn it on again. Then turn on the mobile phone Bluetooth to search for Gamesir-G4pro and pair.
If the Android phone ignores/cancel the Bluetooth pairing of the gamepad or connects to a new Android
phone, you need to press and hold the G+S button for 5 seconds, and the gamepad will re-pair with the Android
phone after it restarts automatically. Turn on the phone's Bluetooth, search for the Gamesir-G4pro, click and pair.
CONNECT TO MOBILE PHONE VIA BLUETOOTH
Play Android controller-supported games
Refers to mobile games that support using a gamepad
1. Go to the home page of the Switch, and click: Controllers——change the grip / order and enter the pairing
interface
2. Press and hold the Y + HOME until the controller is turned on
3. The controller will automatically pair with Switch or Switch Lite
4. The next time you connect to Switch or Switch Lite, as long as you press and hold the HOME for 2 seconds to
turn it on, the controller will auto connect to Switch or Switch Lite
Note: If you need to switch the gamepad to other modes, go to the Switch homepage, and click Controller—>
Change the grip/order to enter the pairing page. Turn off the gamepad and press the key combination to turn it
on and pair it with the Switch.
If you need to cancel the pairing with the current gamepad for the Switch or the controller needs to be
connected to the new Switch, please go to the Switch homepage, click in order: Controller—>Change the grip/order,
and enter the pairing page. Press and hold the G+S button of the gamepad for 5 seconds, and the controller will
re-pair with the Switch after it auto restarts.
HOME button indicator
Flashes in red
Flashes quickly in red
Satys in red Connected
Pairing
Description
Connecting
HOME button indicator
Flashes in blue
Flashes quickly in blue
Stays in blue Connected
Pairing
Description
Connecting
Y+HOME
A+HOME
UPGRADE THE GAMEPAD VIA THE MOBILE APP
ONLINE TUTORIAL
The GameSir mobile app can provide firmware upgrading and other functions.
Please scan the QR code to download

Turbo function
Achieve fast attacks in the game
Set up a turbo / cancel a turbo Editable buttons
A,B,X,Y,L1,R1,L2,R2
Long press the button that needs to
be used to trigger a combo, then
press the Turbo button
SWAP ABXY BUTTON POSITIONS
G4 pro adopts the design of magnetic keycap, which can exchange the key position according to the different
platforms, to avoid the wrong operation of the key marks A and actually triggering B
AUTO SLEEP
When the gamepad is in a normal wireless connection, it will auto sleep within 600 seconds without any operation.
When the gamepad is not connected, it will auto sleep within 120 seconds without any operation.
After auto sleep, long press the HOME button for 2 seconds to wake up and connect the device.
SCREENSHOT, RECORDING AND KEY COMBINATION
TURBO FUNCTION
1. There is a reserved groove on the left side of the "ABXY" buttons, use your index finger to unplug the ABXY
keycap from the left groove
2. Put the unplugged "ABXY" keycap facing upwards, align it with the key position of the corresponding platform,
and install it.
Note: PC platform: upper Y, left X, lower A, right B;NS platform: up X, left Y, down B, right A;The factory default
setting is the PC platform layout
PC platform NS platform
G + D-pad up and down
Adjust motor vibration intensity
Adjust the light intensity of the G4 pro
Control PC/Android system volume
The steps are as follows
Tap the screenshot button or long
press the screenshot button
S + D-pad up and down
S + D-pad left and right
Description
PC, Android, Switch: Tap the screenshot button to take
a screenshot, Switch: Long press the screenshot
button to record the first 30 seconds of video
NOTICE: PLEASE READ THIS PRECAUTIONS CAREFULLY.
CONTAINS SMALL PARTS. Keep out of reach of children under the age of 3. Seek immediate medical attention
if swallowed or inhaled.
DO NOT use the product near fire.
DO NOT expose to direct sunlight or high temperatures.
DO NOT leave the product in a humid or dusty environment.
DO NOT impact the product or cause it to fall due to strong impact.
DO NOT touch USB port directly or it might cause malfunctions.
DO NOT strongly bend or pull cable parts.
Use a soft, dry cloth while cleaning.
DO NOT use chemicals such as gasoline or thinner.
DO NOT disassemble, repair or modify.
DO NOT use for purposes other than its original purpose. We are NOT responsible for accidents or damage
when used for non-original purposes.
DO NOT look directly at the optical light. It might damage your eyes.
If you have any quality concerns or suggestions, please contact GameSir or your
local distributor.
Nintendo Switch™ is a registered trademark of Nintendo Inc. All rights reserved. All other trademarks are
property of their respective owners. Photos and illustrations not binding. Contents, designs and specifications
are subject to change without notice and may vary from one country to another. This product is not distributed
under official license form or approved, sponsored or endorsed by Nintendo Inc. This product is not
manufactured for Nintendo Inc.
Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:
\(1)Thisdevicemaynotcauseharmfulinterference,and(2)thisdevicemustacceptanyinterferencereceived,
includinginterferencethatmaycauseundesiredoperation.
Note:ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuant
topart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonableprotectionagainstharmful
interferenceinaresidentialinstallation.Thisequipmentgenerates,usesandcanradiateradiofrequency
energyand,ifnotinstalledandusedinaccordancewiththeinstructions,maycauseharmfulinterferenceto
radiocommunications.
However,thereisnoguaranteethatinterferencewillnotoccurinaparticularinstallation.Ifthisequipmentdoes
causeharmfulinterferencetoradioortelevisionreception,whichcanbedeterminedbyturningtheequipment
offandon,theuserisencouragedtotrytocorrecttheinterferencebyoneormoreofthefollowingmeasures:
-Reorientorrelocatethereceivingantenna.
-Increasetheseparationbetweentheequipmentandreceiver.
-Connecttheequipmentintoanoutletonacircuitdifferentfromthat towhichthereceiverisconnected.
-Consultthedealeroranexperiencedradio/TVtechnicianforhelp.

Turbo function
Achieve fast attacks in the game
Set up a turbo / cancel a turbo Editable buttons
A,B,X,Y,L1,R1,L2,R2
Long press the button that needs to
be used to trigger a combo, then
press the Turbo button
SWAP ABXY BUTTON POSITIONS
G4 pro adopts the design of magnetic keycap, which can exchange the key position according to the different
platforms, to avoid the wrong operation of the key marks A and actually triggering B
AUTO SLEEP
When the gamepad is in a normal wireless connection, it will auto sleep within 600 seconds without any operation.
When the gamepad is not connected, it will auto sleep within 120 seconds without any operation.
After auto sleep, long press the HOME button for 2 seconds to wake up and connect the device.
SCREENSHOT, RECORDING AND KEY COMBINATION
TURBO FUNCTION
1. There is a reserved groove on the left side of the "ABXY" buttons, use your index finger to unplug the ABXY
keycap from the left groove
2. Put the unplugged "ABXY" keycap facing upwards, align it with the key position of the corresponding platform,
and install it.
Note: PC platform: upper Y, left X, lower A, right B;NS platform: up X, left Y, down B, right A;The factory default
setting is the PC platform layout
PC platform NS platform
G + D-pad up and down
Adjust motor vibration intensity
Adjust the light intensity of the G4 pro
Control PC/Android system volume
The steps are as follows
Tap the screenshot button or long
press the screenshot button
S + D-pad up and down
S + D-pad left and right
Description
PC, Android, Switch: Tap the screenshot button to take
a screenshot, Switch: Long press the screenshot
button to record the first 30 seconds of video
NOTICE: PLEASE READ THIS PRECAUTIONS CAREFULLY.
CONTAINS SMALL PARTS. Keep out of reach of children under the age of 3. Seek immediate medical attention
if swallowed or inhaled.
DO NOT use the product near fire.
DO NOT expose to direct sunlight or high temperatures.
DO NOT leave the product in a humid or dusty environment.
DO NOT impact the product or cause it to fall due to strong impact.
DO NOT touch USB port directly or it might cause malfunctions.
DO NOT strongly bend or pull cable parts.
Use a soft, dry cloth while cleaning.
DO NOT use chemicals such as gasoline or thinner.
DO NOT disassemble, repair or modify.
DO NOT use for purposes other than its original purpose. We are NOT responsible for accidents or damage
when used for non-original purposes.
DO NOT look directly at the optical light. It might damage your eyes.
If you have any quality concerns or suggestions, please contact GameSir or your
local distributor.
Nintendo Switch™ is a registered trademark of Nintendo Inc. All rights reserved. All other trademarks are
property of their respective owners. Photos and illustrations not binding. Contents, designs and specifications
are subject to change without notice and may vary from one country to another. This product is not distributed
under official license form or approved, sponsored or endorsed by Nintendo Inc. This product is not
manufactured for Nintendo Inc.
Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:
\(1)Thisdevicemaynotcauseharmfulinterference,and(2)thisdevicemustacceptanyinterferencereceived,
includinginterferencethatmaycauseundesiredoperation.
Note:ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuant
topart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonableprotectionagainstharmful
interferenceinaresidentialinstallation.Thisequipmentgenerates,usesandcanradiateradiofrequency
energyand,ifnotinstalledandusedinaccordancewiththeinstructions,maycauseharmfulinterferenceto
radiocommunications.
However,thereisnoguaranteethatinterferencewillnotoccurinaparticularinstallation.Ifthisequipmentdoes
causeharmfulinterferencetoradioortelevisionreception,whichcanbedeterminedbyturningtheequipment
offandon,theuserisencouragedtotrytocorrecttheinterferencebyoneormoreofthefollowingmeasures:
-Reorientorrelocatethereceivingantenna.
-Increasetheseparationbetweentheequipmentandreceiver.
-Connecttheequipmentintoanoutletonacircuitdifferentfromthat towhichthereceiverisconnected.
-Consultthedealeroranexperiencedradio/TVtechnicianforhelp.