GCC Technologies Spirit Series User manual

4F-1, 236, Fu-Te 2
nd
Rd., His Chih,
Taipei Hsien, 221, Taiwan
TEL:[phone] ٠2694-6687
FAX:[phone] ٠2694-5097
Y Motor & Auto Focus Cable Changing Process
Spirit
Version: 1.0
May 20, 2014

1
Revision History：
Version
Date Page CONTENTS
1.0 May, 20 2014 First release

2
1.Dismount 2 screws of top cover(M4 *8)

3
2. Lift the top cover
3. Please turn the safety lock switch to LOCK status according to the direction shown on the
sticker (see picture) to avoid the collapsing of top cover.

4
4. Dismount 3 screws of x motor cover (M3 *6)
4-1. Dismount 3 screws of x motor idle pulley (Blue circle below). Dismount 4 screws of X
motor (M3 *10,red arrow below) and the x motor cable be removed and changed.

5
5. For changing auto focus cable, first remove the auto focus cable from x motor pcb (see
red circle below).
5-1. On lens carriage side, remove the auto focus cable also (it is tight, so use tweezers will
be helpful).

6
5-2. Pull out some joint will be easier to change auto focus cable.