GE Zoneline AZ41E09DAP User instructions

AZ41E09DAP
GE Zoneline®Dry Air 25 Series Cooling and Electric Heat Unit
Specification Created 12/09 390590
For answers to your Monogram,® GE Profile™or
GE®appliance questions, visit our website at
ge.com or call GE Answer Center®service,
800.626.2000.
Electrical Wiring
All wiring, including installation of receptacle, must
be made in accordance with local electrical codes
and regulations.
Note: Aluminum wiring may pose special problems –
consult a qualified electrician.
Grille Options
Stamped Aluminum Grille – RAG60
Exterior Architectural Louvers Durable Polycarbonate:
RAG61 (Beige) RAG63 (Bittersweet)
RAG62 (Maple) RAG67 (Extruded Aluminum)
Retrofit Kits:
RAK901L – Wall Case Insulation for use with heat pumps.
RAK40 – Deflector Kit to adapt chassis for use with
existing exterior architectural louvered grilles.
Ducted Applications
4100 and 6100 series can be used with ductwork to heat or cool more than one room. RAK6052
Duct Adaptor is applied to top of case over air discharge/RAK601 Duct Extension is applied
to right or left of adaptor. Locally fabricated ductwork may be added to extend to maximum
recommended distance of 15 feet.
Electrical Connection
230/208 volt units may be plugged into a receptacle. 265 volt units are provided with a junction box
and require direct connection. (NEC Requires 265V Direct Connection) See Architects and Engineers
Design Data Manual for electrical connection information including use of sub-base for direct
connected units. Installation must comply with local electrical codes and regulations.
Power Connection kits required on all Zoneline chassis.
Wall Case Dimensions
RAB71 Wall Sleeve
Heavy-gauge galvanized steel, with insulation.
A – 42", B – 13-3/4", C – 16"
RAB77 Wall Sleeve
Molded SMC fiberglass-reinforced polyester
compound.
A – 42-1/8", B– 13-7/8", C – 16-1/4
Wall Opening Dimensions
Add 1/4" to A and C dimensions for all cut-out size.
RAB71 16-1/4" Min. H x 42-1/4" Min. W
RAB71 available in 16", 24", 28" and 31" depths
RAB77 16-1/2" Min. H x 42-3/8" Min. W
Maximum Cord Extension (in inches)
SIDE
VIEW
Inside
Room
Cabinet
Outside
58
21
Grille
7-1/8
RAB71A = 16
RAB77A = 16-1/4
RAB71A = 20-7/8
RAB77A = 21
Room Air/Installation QSart
Dimensions and Installation Information (in inches)
230/208 Volt Line Cord Connected Units
Line Cord
Kit
Electric Heat
(Btuh)
Electric
Heater Watts
Electric
Heat Amps
Min. Circuit
Protection
(Amps)
RAK3153A 8,600/7,100 2,550/2,090 11.6/10.6 15
RAK3203A 11,700/9,600 3,450/2,820 15.5/14.1 20
RAK3303A 17,000/13,900 5,000/4,090 22.3/20.3 30
230/208 Volt Sub-Base Connected Units
Sub-Base
Electric Heat
(Btuh)
Electric
Heater Watts
Electric
Heat Amps
Min. Circuit
Protection
(Amps)
RAK204D15P 8,600/7,100 2,550/2,090 11.6/10.6 15
RAK204D20P 11,700/9,600 3,450/2,820 15.5/14.1 20
RAK204D30P 17,000/13,900 5,000/4,090 22.3/20.3 30
A
C
B
Zoneline RAC Wall Installation

AZ41E09DAP
GE Zoneline®Dry Air 25 Series Cooling and Electric Heat Unit
Specification Created 12/09 390590
For answers to your Monogram,® GE Profile™or
GE®appliance questions, visit our website at
ge.com or call GE Answer Center®service,
800.626.2000.
Features and Benefits
• R-410A Refrigerant
• 9,000/8,800 BTUH
• 11.8/11.8 E.E.R.
• Electronic Touch Controls with LED Display
• 3.4 Dehumidification (pts/hr)
• 280/208 CFM Indoor Fan (High/Low)
• 70/35 Vent CFM
• Corrosion-Treated Chassis Extends Life of the Unit in Sea Coast Areas
• Electronic 7-Step Temperature Limiting To Prevent
Overcooling or Overheating of Room
• Heat Sentinel
• 29 Sound Transmission Class (STC)
• Warm Grey Beige