GE T35 User manual

828742A2.CDR
T35 Transformer Protection System
UR Series Instruction Manual
T35 Revision: 6.0x
Manual P/N: 1601-0114-X2 (GEK-113627)
GE Digital Energy
215 Anderson Avenue, Markham, Ontario
Canada L6E 1B3
Tel: [phone] Fax: [phone]
Internet: http://www.gedigitalenergy.com
GE Multilin's Quality Management
System is registered to ISO
9001:2008
QMI # 005094
UL # A3775
*1601-0114-X2*
LISTED
52TL
IND.CONT. EQ.
E83849
GE Energy

Copyright © 2012 GE Multilin Inc. All rights reserved.
T35 Transformer Protection System UR Series Instruction Manual revision 6.0x.
EnerVista, EnerVista Launchpad, and EnerVista UR Setup are registered
trademarks of GE Multilin Inc.
The contents of this manual are the property of GE Multilin Inc. This
documentation is furnished on license and may not be reproduced in whole or
in part without the permission of GE Multilin. The content of this manual is for
informational use only and is subject to change without notice.
Part number: 1601-0114-X2 (April 2012)

ADDENDUM
This addendum contains information that relates to the T35 Transformer Protection System, version 6.0x. This adden-
dum lists a number of information items that appear in the instruction manual GEK-113627 (revision X2) but are not
included in the current T35 operations.
The following functions and items are not yet available with the current version of the T35 relay:
•N/A.
Version 4.0x and higher releases of the T35 relay includes new hardware (CPU and CT/VT modules).
• The new CPU modules are specified with the following order codes: 9E, 9G, 9H, 9J, 9K, 9L, 9M, 9N, 9P, 9R, and 9S.
• The new CT/VT modules are specified with the following order codes: 8F, 8G, 8H, 8J 8L, 8M, 8N, 8R.
The following table maps the relationship between the old CPU and CT/VT modules to the newer versions:
The new CT/VT modules can only be used with the new CPUs (9E, 9G, 9H, 9J, 9K, 9L, 9M, 9N, 9P, 9R, and 9S), and
the old CT/VT modules can only be used with the old CPU modules (9A, 9C, 9D). In the event that there is a mismatch
between the CPU and CT/VT module, the relay will not function and a DSP ERROR or HARDWARE MISMATCH error will
be displayed.
All other input/output modules are compatible with the new hardware.
With respect to the firmware, firmware versions 4.0x and higher are only compatible with the new CPU and CT/VT mod-
ules. Previous versions of the firmware (3.4x and earlier) are only compatible with the older CPU and CT/VT modules.
MODULE OLD NEW DESCRIPTION
CPU 9A 9E RS485 and RS485 (Modbus RTU, DNP)
9C 9G RS485 and 10Base-F (Ethernet, Modbus TCP/IP, DNP)
9D 9H RS485 and redundant 10Base-F (Ethernet, Modbus TCP/IP, DNP)
--- 9J RS485 and multi-mode ST 100Base-FX
--- 9K RS485 and multi-mode ST redundant 100Base-FX
--- 9L RS485 and single mode SC 100Base-FX
--- 9M RS485 and single mode SC redundant 100Base-FX
--- 9N RS485 and 10/100Base-T
--- 9P RS485 and single mode ST 100Base-FX
--- 9R RS485 and single mode ST redundant 100Base-FX
--- 9S RS485 and six-port managed Ethernet switch
CT/VT 8A 8F Standard 4CT/4VT
8B 8G Sensitive ground 4CT/4VT
8C 8H Standard 8CT
8D 8J Sensitive ground 8CT
-- 8L Standard 4CT/4VT with enhanced diagnostics
-- 8M Sensitive ground 4CT/4VT with enhanced diagnostics
-- 8N Standard 8CT with enhanced diagnostics
-- 8R Sensitive ground 8CT with enhanced diagnostics

GE Multilin T35 Transformer Protection System v
TABLE OF CONTENTS
1. GETTING STARTED 1.1 IMPORTANT PROCEDURES
1.1.1 CAUTIONS AND WARNINGS ........................................................................... 1-1
1.1.2 INSPECTION CHECKLIST ................................................................................ 1-1
1.2 UR OVERVIEW
1.2.1 INTRODUCTION TO THE UR ........................................................................... 1-2
1.2.2 HARDWARE ARCHITECTURE ......................................................................... 1-3
1.2.3 SOFTWARE ARCHITECTURE.......................................................................... 1-4
1.2.4 IMPORTANT CONCEPTS ................................................................................. 1-4
1.3 ENERVISTA UR SETUP SOFTWARE
1.3.1 PC REQUIREMENTS ........................................................................................ 1-5
1.3.2 INSTALLATION.................................................................................................. 1-5
1.3.3 CONFIGURING THE T35 FOR SOFTWARE ACCESS .................................... 1-6
1.3.4 USING THE QUICK CONNECT FEATURE....................................................... 1-9
1.3.5 CONNECTING TO THE T35 RELAY............................................................... 1-15
1.4 UR HARDWARE
1.4.1 MOUNTING AND WIRING............................................................................... 1-16
1.4.2 COMMUNICATIONS........................................................................................ 1-16
1.4.3 FACEPLATE DISPLAY .................................................................................... 1-16
1.5 USING THE RELAY
1.5.1 FACEPLATE KEYPAD..................................................................................... 1-17
1.5.2 MENU NAVIGATION ....................................................................................... 1-17
1.5.3 MENU HIERARCHY ........................................................................................ 1-17
1.5.4 RELAY ACTIVATION....................................................................................... 1-17
1.5.5 RELAY PASSWORDS ..................................................................................... 1-18
1.5.6 FLEXLOGIC™ CUSTOMIZATION................................................................... 1-18
1.5.7 COMMISSIONING ........................................................................................... 1-19
2. PRODUCT DESCRIPTION 2.1 INTRODUCTION
2.1.1 OVERVIEW........................................................................................................ 2-1
2.1.2 ORDERING........................................................................................................ 2-2
2.1.3 REPLACEMENT MODULES ............................................................................. 2-6
2.2 SPECIFICATIONS
2.2.1 PROTECTION ELEMENTS ............................................................................... 2-9
2.2.2 USER-PROGRAMMABLE ELEMENTS........................................................... 2-10
2.2.3 MONITORING.................................................................................................. 2-11
2.2.4 METERING ...................................................................................................... 2-11
2.2.5 INPUTS ............................................................................................................ 2-12
2.2.6 POWER SUPPLY ............................................................................................ 2-13
2.2.7 OUTPUTS ........................................................................................................ 2-13
2.2.8 COMMUNICATIONS........................................................................................ 2-14
2.2.9 INTER-RELAY COMMUNICATIONS ............................................................... 2-16
2.2.10 ENVIRONMENTAL .......................................................................................... 2-16
2.2.11 TYPE TESTS ................................................................................................... 2-17
2.2.12 PRODUCTION TESTS .................................................................................... 2-17
2.2.13 APPROVALS ................................................................................................... 2-18
2.2.14 MAINTENANCE ............................................................................................... 2-18
3. HARDWARE 3.1 DESCRIPTION
3.1.1 PANEL CUTOUT ............................................................................................... 3-1
3.1.2 MODULE WITHDRAWAL AND INSERTION ..................................................... 3-6
3.1.3 REAR TERMINAL LAYOUT............................................................................... 3-8
3.2 WIRING
3.2.1 TYPICAL WIRING............................................................................................ 3-10
3.2.2 DIELECTRIC STRENGTH ............................................................................... 3-11
3.2.3 CONTROL POWER ......................................................................................... 3-11
3.2.4 CT/VT MODULES ............................................................................................ 3-12
3.2.5 PROCESS BUS MODULES ............................................................................ 3-14
3.2.6 CONTACT INPUTS AND OUTPUTS............................................................... 3-14

vi T35 Transformer Protection System GE Multilin
TABLE OF CONTENTS
3.2.7 TRANSDUCER INPUTS AND OUTPUTS........................................................3-22
3.2.8 RS232 FACEPLATE PORT..............................................................................3-23
3.2.9 CPU COMMUNICATION PORTS.....................................................................3-23
3.2.10 IRIG-B...............................................................................................................3-26
3.3 DIRECT INPUT/OUTPUT COMMUNICATIONS
3.3.1 DESCRIPTION .................................................................................................3-27
3.3.2 FIBER: LED AND ELED TRANSMITTERS ......................................................3-29
3.3.3 FIBER-LASER TRANSMITTERS .....................................................................3-30
3.3.4 G.703 INTERFACE...........................................................................................3-31
3.3.5 RS422 INTERFACE .........................................................................................3-34
3.3.6 RS422 AND FIBER INTERFACE .....................................................................3-36
3.3.7 G.703 AND FIBER INTERFACE ......................................................................3-36
3.3.8 IEEE C37.94 INTERFACE................................................................................3-37
3.3.9 C37.94SM INTERFACE ...................................................................................3-40
3.4 MANAGED ETHERNET SWITCH MODULES
3.4.1 OVERVIEW ......................................................................................................3-43
3.4.2 MANAGED ETHERNET SWITCH MODULE HARDWARE..............................3-43
3.4.3 MANAGED SWITCH LED INDICATORS .........................................................3-44
3.4.4 INITIAL SETUP OF THE ETHERNET SWITCH MODULE...............................3-44
3.4.5 CONFIGURING THE MANAGED ETHERNET SWITCH MODULE .................3-48
3.4.6 UPLOADING T35 SWITCH MODULE FIRMWARE .........................................3-51
3.4.7 ETHERNET SWITCH SELF-TEST ERRORS...................................................3-53
4. HUMAN INTERFACES 4.1 ENERVISTA UR SETUP SOFTWARE INTERFACE
4.1.1 INTRODUCTION ................................................................................................4-1
4.1.2 CREATING A SITE LIST ....................................................................................4-1
4.1.3 ENERVISTA UR SETUP OVERVIEW................................................................4-1
4.1.4 ENERVISTA UR SETUP MAIN WINDOW..........................................................4-4
4.2 EXTENDED ENERVISTA UR SETUP FEATURES
4.2.1 SETTINGS TEMPLATES ...................................................................................4-5
4.2.2 SECURING AND LOCKING FLEXLOGIC™ EQUATIONS ................................4-9
4.2.3 SETTINGS FILE TRACEABILITY.....................................................................4-11
4.3 FACEPLATE INTERFACE
4.3.1 FACEPLATE.....................................................................................................4-14
4.3.2 LED INDICATORS............................................................................................4-15
4.3.3 CUSTOM LABELING OF LEDS .......................................................................4-18
4.3.4 DISPLAY...........................................................................................................4-24
4.3.5 KEYPAD ...........................................................................................................4-24
4.3.6 BREAKER CONTROL ......................................................................................4-24
4.3.7 MENUS.............................................................................................................4-25
4.3.8 CHANGING SETTINGS ...................................................................................4-27
5. SETTINGS 5.1 OVERVIEW
5.1.1 SETTINGS MAIN MENU ....................................................................................5-1
5.1.2 INTRODUCTION TO ELEMENTS......................................................................5-4
5.1.3 INTRODUCTION TO AC SOURCES..................................................................5-5
5.2 PRODUCT SETUP
5.2.1 SECURITY..........................................................................................................5-8
5.2.2 DISPLAY PROPERTIES ..................................................................................5-12
5.2.3 CLEAR RELAY RECORDS ..............................................................................5-14
5.2.4 COMMUNICATIONS ........................................................................................5-15
5.2.5 MODBUS USER MAP ......................................................................................5-38
5.2.6 REAL TIME CLOCK .........................................................................................5-39
5.2.7 USER-PROGRAMMABLE FAULT REPORT....................................................5-40
5.2.8 OSCILLOGRAPHY ...........................................................................................5-41
5.2.9 DATA LOGGER................................................................................................5-43
5.2.10 USER-PROGRAMMABLE LEDS .....................................................................5-44
5.2.11 USER-PROGRAMMABLE SELF TESTS .........................................................5-47
5.2.12 CONTROL PUSHBUTTONS ............................................................................5-48

GE Multilin T35 Transformer Protection System vii
TABLE OF CONTENTS
5.2.13 USER-PROGRAMMABLE PUSHBUTTONS ................................................... 5-49
5.2.14 FLEX STATE PARAMETERS.......................................................................... 5-54
5.2.15 USER-DEFINABLE DISPLAYS ....................................................................... 5-55
5.2.16 DIRECT INPUTS/OUTPUTS ........................................................................... 5-57
5.2.17 TELEPROTECTION......................................................................................... 5-65
5.2.18 INSTALLATION................................................................................................ 5-65
5.3 REMOTE RESOURCES
5.3.1 REMOTE RESOURCES CONFIGURATION ................................................... 5-67
5.4 SYSTEM SETUP
5.4.1 AC INPUTS ...................................................................................................... 5-68
5.4.2 POWER SYSTEM............................................................................................ 5-70
5.4.3 SIGNAL SOURCES ......................................................................................... 5-71
5.4.4 TRANSFORMER ............................................................................................. 5-73
5.4.5 BREAKERS...................................................................................................... 5-84
5.4.6 DISCONNECT SWITCHES ............................................................................. 5-88
5.4.7 FLEXCURVES™.............................................................................................. 5-91
5.5 FLEXLOGIC™
5.5.1 INTRODUCTION TO FLEXLOGIC™............................................................... 5-98
5.5.2 FLEXLOGIC™ RULES .................................................................................. 5-105
5.5.3 FLEXLOGIC™ EVALUATION........................................................................ 5-106
5.5.4 FLEXLOGIC™ EQUATION EDITOR ............................................................. 5-106
5.5.5 FLEXLOGIC™ TIMERS................................................................................. 5-106
5.5.6 FLEXELEMENTS™ ....................................................................................... 5-107
5.5.7 NON-VOLATILE LATCHES ........................................................................... 5-111
5.6 GROUPED ELEMENTS
5.6.1 OVERVIEW.................................................................................................... 5-112
5.6.2 SETTING GROUP ......................................................................................... 5-112
5.6.3 TRANSFORMER ELEMENTS ....................................................................... 5-112
5.6.4 PHASE CURRENT ........................................................................................ 5-118
5.6.5 GROUND CURRENT..................................................................................... 5-125
5.7 CONTROL ELEMENTS
5.7.1 OVERVIEW.................................................................................................... 5-126
5.7.2 TRIP BUS....................................................................................................... 5-126
5.7.3 SETTING GROUPS ....................................................................................... 5-128
5.7.4 SELECTOR SWITCH..................................................................................... 5-129
5.7.5 DIGITAL COUNTERS .................................................................................... 5-135
5.7.6 MONITORING ELEMENTS ........................................................................... 5-137
5.8 INPUTS AND OUTPUTS
5.8.1 CONTACT INPUTS........................................................................................ 5-143
5.8.2 VIRTUAL INPUTS.......................................................................................... 5-145
5.8.3 CONTACT OUTPUTS.................................................................................... 5-146
5.8.4 VIRTUAL OUTPUTS ...................................................................................... 5-148
5.8.5 REMOTE DEVICES ....................................................................................... 5-149
5.8.6 REMOTE INPUTS.......................................................................................... 5-150
5.8.7 REMOTE DOUBLE-POINT STATUS INPUTS .............................................. 5-151
5.8.8 REMOTE OUTPUTS...................................................................................... 5-151
5.8.9 RESETTING................................................................................................... 5-152
5.8.10 DIRECT INPUTS AND OUTPUTS ................................................................. 5-153
5.8.11 TELEPROTECTION INPUTS AND OUTPUTS.............................................. 5-156
5.8.12 IEC 61850 GOOSE ANALOGS...................................................................... 5-158
5.8.13 IEC 61850 GOOSE INTEGERS..................................................................... 5-159
5.9 TRANSDUCER INPUTS AND OUTPUTS
5.9.1 DCMA INPUTS .............................................................................................. 5-160
5.9.2 RTD INPUTS.................................................................................................. 5-161
5.9.3 DCMA OUTPUTS .......................................................................................... 5-163
5.10 TESTING
5.10.1 TEST MODE .................................................................................................. 5-166
5.10.2 FORCE CONTACT INPUTS .......................................................................... 5-167
5.10.3 FORCE CONTACT OUTPUTS ...................................................................... 5-168

viii T35 Transformer Protection System GE Multilin
TABLE OF CONTENTS
6. ACTUAL VALUES 6.1 OVERVIEW
6.1.1 ACTUAL VALUES MAIN MENU.........................................................................6-1
6.2 STATUS
6.2.1 CONTACT INPUTS ............................................................................................6-3
6.2.2 VIRTUAL INPUTS ..............................................................................................6-3
6.2.3 REMOTE INPUTS ..............................................................................................6-3
6.2.4 REMOTE DOUBLE-POINT STATUS INPUTS ...................................................6-4
6.2.5 TELEPROTECTION INPUTS .............................................................................6-4
6.2.6 CONTACT OUTPUTS ........................................................................................6-4
6.2.7 VIRTUAL OUTPUTS ..........................................................................................6-5
6.2.8 REMOTE DEVICES............................................................................................6-5
6.2.9 DIGITAL COUNTERS.........................................................................................6-6
6.2.10 SELECTOR SWITCHES ....................................................................................6-6
6.2.11 FLEX STATES....................................................................................................6-6
6.2.12 ETHERNET ........................................................................................................6-6
6.2.13 DIRECT INPUTS ................................................................................................6-7
6.2.14 DIRECT DEVICES STATUS ..............................................................................6-7
6.2.15 IEC 61850 GOOSE INTEGERS .........................................................................6-8
6.2.16 EGD PROTOCOL STATUS................................................................................6-8
6.2.17 TELEPROTECTION CHANNEL TESTS.............................................................6-9
6.2.18 ETHERNET SWITCH .........................................................................................6-9
6.3 METERING
6.3.1 METERING CONVENTIONS ...........................................................................6-10
6.3.2 TRANSFORMER ..............................................................................................6-13
6.3.3 SOURCES ........................................................................................................6-14
6.3.4 TRACKING FREQUENCY................................................................................6-17
6.3.5 FLEXELEMENTS™..........................................................................................6-17
6.3.6 IEC 61580 GOOSE ANALOG VALUES ...........................................................6-18
6.3.7 TRANSDUCER INPUTS/OUTPUTS.................................................................6-18
6.4 RECORDS
6.4.1 USER-PROGRAMMABLE FAULT REPORTS .................................................6-19
6.4.2 EVENT RECORDS...........................................................................................6-19
6.4.3 OSCILLOGRAPHY ...........................................................................................6-19
6.4.4 DATA LOGGER................................................................................................6-20
6.4.5 BREAKER MAINTENANCE .............................................................................6-20
6.5 PRODUCT INFORMATION
6.5.1 MODEL INFORMATION...................................................................................6-21
6.5.2 FIRMWARE REVISIONS..................................................................................6-21
7. COMMANDS AND
TARGETS
7.1 COMMANDS
7.1.1 COMMANDS MENU...........................................................................................7-1
7.1.2 VIRTUAL INPUTS ..............................................................................................7-1
7.1.3 CLEAR RECORDS.............................................................................................7-2
7.1.4 SET DATE AND TIME ........................................................................................7-2
7.1.5 RELAY MAINTENANCE.....................................................................................7-3
7.2 TARGETS
7.2.1 TARGETS MENU ...............................................................................................7-4
7.2.2 TARGET MESSAGES ........................................................................................7-4
7.2.3 RELAY SELF-TESTS .........................................................................................7-4
8. SECURITY 8.1 PASSWORD SECURITY
8.1.1 OVERVIEW ........................................................................................................8-1
8.1.2 PASSWORD SECURITY MENU ........................................................................8-2
8.1.3 LOCAL PASSWORDS........................................................................................8-2
8.1.4 REMOTE PASSWORDS ....................................................................................8-3
8.1.5 ACCESS SUPERVISION ...................................................................................8-4
8.1.6 DUAL PERMISSION SECURITY ACCESS........................................................8-4

GE Multilin T35 Transformer Protection System ix
TABLE OF CONTENTS
8.2 ENERVISTA SECURITY MANAGEMENT SYSTEM
8.2.1 OVERVIEW........................................................................................................ 8-6
8.2.2 ENABLING THE SECURITY MANAGEMENT SYSTEM ................................... 8-6
8.2.3 ADDING A NEW USER ..................................................................................... 8-6
8.2.4 MODIFYING USER PRIVILEGES ..................................................................... 8-7
9. COMMISSIONING 9.1 DIFFERENTIAL CHARACTERISTIC TEST
9.1.1 DESCRIPTION................................................................................................... 9-1
9.2 DIFFERENTIAL CHARACTERISTIC TEST EXAMPLES
9.2.1 INTRODUCTION................................................................................................ 9-3
9.2.2 TEST EXAMPLE 1 ............................................................................................. 9-4
9.2.3 TEST EXAMPLE 2 ............................................................................................. 9-9
9.2.4 TEST EXAMPLE 3 ........................................................................................... 9-10
9.2.5 TEST EXAMPLE 4 ........................................................................................... 9-11
9.3 INRUSH INHIBIT TEST
9.3.1 INRUSH INHIBIT TEST PROCEDURE ........................................................... 9-12
9.4 OVEREXCITATION INHIBIT TEST
9.4.1 OVEREXCITATION INHIBIT TEST PROCEDURE ......................................... 9-13
9.5 COMMISSIONING TEST TABLES
9.5.1 DIFFERENTIAL RESTRAINT TESTS.............................................................. 9-14
9.5.2 INRUSH INHIBIT TESTS ................................................................................. 9-14
9.5.3 OVEREXCITATION INHIBIT TESTS ............................................................... 9-15
A. FLEXANALOG AND
FLEXINTEGER
PARAMETERS
A.1 PARAMETER LISTS
A.1.1 FLEXANALOG ITEMS .......................................................................................A-1
A.1.2 FLEXINTEGER ITEMS ....................................................................................A-12
B. MODBUS
COMMUNICATIONS
B.1 MODBUS RTU PROTOCOL
B.1.1 INTRODUCTION................................................................................................B-1
B.1.2 PHYSICAL LAYER.............................................................................................B-1
B.1.3 DATA LINK LAYER............................................................................................B-1
B.1.4 CRC-16 ALGORITHM........................................................................................B-2
B.2 MODBUS FUNCTION CODES
B.2.1 SUPPORTED FUNCTION CODES ...................................................................B-3
B.2.2 READ ACTUAL VALUES OR SETTINGS (FUNCTION CODE 03/04H) ...........B-3
B.2.3 EXECUTE OPERATION (FUNCTION CODE 05H) ...........................................B-4
B.2.4 STORE SINGLE SETTING (FUNCTION CODE 06H) .......................................B-4
B.2.5 STORE MULTIPLE SETTINGS (FUNCTION CODE 10H) ................................B-5
B.2.6 EXCEPTION RESPONSES ...............................................................................B-5
B.3 FILE TRANSFERS
B.3.1 OBTAINING RELAY FILES VIA MODBUS ........................................................B-6
B.3.2 MODBUS PASSWORD OPERATION ...............................................................B-7
B.4 MEMORY MAPPING
B.4.1 MODBUS MEMORY MAP .................................................................................B-8
B.4.2 DATA FORMATS .............................................................................................B-51
C. IEC 61850
COMMUNICATIONS
C.1 OVERVIEW
C.1.1 INTRODUCTION................................................................................................C-1
C.1.2 COMMUNICATION PROFILES .........................................................................C-1
C.2 SERVER DATA ORGANIZATION
C.2.1 OVERVIEW........................................................................................................C-2

x T35 Transformer Protection System GE Multilin
TABLE OF CONTENTS
C.2.2 GGIO1: DIGITAL STATUS VALUES ................................................................. C-2
C.2.3 GGIO2: DIGITAL CONTROL VALUES.............................................................. C-2
C.2.4 GGIO3: DIGITAL STATUS AND ANALOG VALUES FROM RECEIVED GOOSE
DATAC-2
C.2.5 GGIO4: GENERIC ANALOG MEASURED VALUES......................................... C-2
C.2.6 MMXU: ANALOG MEASURED VALUES ..........................................................C-3
C.2.7 PROTECTION AND OTHER LOGICAL NODES............................................... C-3
C.3 SERVER FEATURES AND CONFIGURATION
C.3.1 BUFFERED/UNBUFFERED REPORTING........................................................ C-5
C.3.2 FILE TRANSFER ............................................................................................... C-5
C.3.3 TIMESTAMPS AND SCANNING ....................................................................... C-5
C.3.4 LOGICAL DEVICE NAME ................................................................................. C-5
C.3.5 LOCATION ........................................................................................................ C-5
C.3.6 LOGICAL NODE NAME PREFIXES.................................................................. C-6
C.3.7 CONNECTION TIMING ..................................................................................... C-6
C.3.8 NON-IEC 61850 DATA ...................................................................................... C-6
C.3.9 COMMUNICATION SOFTWARE UTILITIES..................................................... C-6
C.4 GENERIC SUBSTATION EVENT SERVICES: GSSE AND GOOSE
C.4.1 OVERVIEW ....................................................................................................... C-7
C.4.2 GSSE CONFIGURATION.................................................................................. C-7
C.4.3 FIXED GOOSE .................................................................................................. C-7
C.4.4 CONFIGURABLE GOOSE ................................................................................ C-7
C.4.5 ETHERNET MAC ADDRESS FOR GSSE/GOOSE ..........................................C-9
C.4.6 GSSE ID AND GOOSE ID SETTINGS............................................................ C-10
C.5 IEC 61850 IMPLEMENTATION VIA ENERVISTA UR SETUP
C.5.1 OVERVIEW ..................................................................................................... C-11
C.5.2 CONFIGURING IEC 61850 SETTINGS .......................................................... C-12
C.5.3 ABOUT ICD FILES .......................................................................................... C-13
C.5.4 CREATING AN ICD FILE WITH ENERVISTA UR SETUP.............................. C-17
C.5.5 ABOUT SCD FILES......................................................................................... C-17
C.5.6 IMPORTING AN SCD FILE WITH ENERVISTA UR SETUP........................... C-20
C.6 ACSI CONFORMANCE
C.6.1 ACSI BASIC CONFORMANCE STATEMENT ................................................ C-22
C.6.2 ACSI MODELS CONFORMANCE STATEMENT............................................ C-22
C.6.3 ACSI SERVICES CONFORMANCE STATEMENT.........................................C-23
C.7 LOGICAL NODES
C.7.1 LOGICAL NODES TABLE ............................................................................... C-26
D. IEC 60870-5-104
COMMUNICATIONS
D.1 IEC 60870-5-104 PROTOCOL
D.1.1 INTEROPERABILITY ........................................................................................ D-1
D.1.2 POINT LIST ....................................................................................................... D-9
E. DNP COMMUNICATIONS E.1 DEVICE PROFILE DOCUMENT
E.1.1 DNP V3.00 DEVICE PROFILE .......................................................................... E-1
E.1.2 IMPLEMENTATION TABLE .............................................................................. E-4
E.2 DNP POINT LISTS
E.2.1 BINARY INPUT POINTS ................................................................................... E-8
E.2.2 BINARY AND CONTROL RELAY OUTPUT...................................................... E-9
E.2.3 COUNTERS..................................................................................................... E-10
E.2.4 ANALOG INPUTS............................................................................................ E-11
F. MISCELLANEOUS F.1 CHANGE NOTES
F.1.1 REVISION HISTORY......................................................................................... F-1
F.1.2 CHANGES TO THE T35 MANUAL.................................................................... F-2
F.2 ABBREVIATIONS