Geemarc Amplidect Combi 295 User manual
12341234
QUICK USER GUIDE
!!! Please refer to our website: www.geemarc.com for an up to
date user guide, as there may be important updates and
changes you need to be aware of !!!
Congratulations on purchasing your Geemarc AMPLIDECT
COMBI 295 telephone. This telephone offers all the advantages
of cordless technology (compliant with Digitally Enhanced
Cordless Telecommunications-DECT standard) together with
an easy to see big button keypad, ideal for those who suffer
with poor sight. This telephone is also hearing aid compatible.
It is important that you read the instructions below in order to
use your Geemarc telephone to its full potential.
Base
Handset
Connection
CAUTION: Use only the battery provided. There may be a risk
of explosion if a wrong type of battery is used for the parent
unit. The battery cannot be subjected to high or low extreme
temperature and low air pressure at high altitude during use,
storage or transportation. Disposal of battery into fire or a hot
oven, or mechanically crushing or cutting or the battery can
result in an explosion. Leaving the battery in an extremely high
temperature surrounding environment can result in an explosion
or the leakage of flammable liquid of gas. Battery subjected
to extremely low air pressure may result in an explosion or the
leakage of flammable liquid or gas. Dispose of used battery
according to the instructions.
Normal operating temperature for the product (e.g.0oC~40oC).
Use only the adapters and battery listed below.
Power adapter information: output:6V DC 0.45A,2.7W.
Vtech Telecommunications Limited.
Model: VT05EEU06045 (EU), VT05EUK06045 (UK)
Rechargeable Battery Pack: Model:NI-MH AAA500x2.
2.4V, 500mAh. Corun.
WallMounting
PACKAGE CONTENTS
1 Telephone base, 1 Corded handset, 1 cordless Handset, 2
power adapter, 1 Charger, 1 Telephone line cord, 1 NiMh
battery pack, 1 Quick user guide.
INSTALLATION
Connecting the telephone
Connect the telephone cable to the telephone line socket (A)
and to the telephone wall socket (B).
Connect the handset curly cord to the base.
Connect the power adapter jack to base and charger (C) then
connect the power adapter plug in mains power (D).
Note: Use only the power adapters supplied with the phone.
Connecting the battery
Plug the battery connector securely
into the socket inside the handset
battery compartment.
Insert the supplied battery as indicated.
Align the cover flat against the battery compartment, and then
slide it upwards until it clicks into place.
Charging the batteries
Charge the batteries for at least 16 hours when charging for
the first time.
OVERVIEW
Base
1- LCD DISPLAY
2- IN USE ( ) : On during a call.
3- RING light ( )
Flashes when there is an incoming call.
Steadily on when the answering machine is turned on. Flashes
when there are new memos or messages in the answering
machine.
4- MENU/OK ( )
In idle mode: Press to access the main menu.
In sub-menu mode: Press to confirm the selection.
In Redial list/Call list: Press to store the number into Phonebook.
5- PHONEBOOK ( )
In Idle: Press to access the phonebook.
6- CALLS (CALL LIST) ( )
In Idle mode: Press to access the call list.
7- INT/MUTE/CLEAR ( )
In main menu mode: Press to go back to idle screen.
In sub-menu mode: Press to go back to previous level.
In sub-menu mode: Press and hold to go back to idle screen.
In editing / predialing mode: Press to clear a character / digit.
In editing / predialing mode: Press and hold to delete all the
character /digits
During a call: Press to mute / unmute the microphone.
In ringing: Press to silence the base ringer.
In idle mode: Press to intercom another system handset.
8- MEMORY KEYS (3 PHOTO SPEED DIAL KEYS;
1 MEMORY KEY - M4)
In idle mode: Dial your phone number and Press and hold the
memory key until to hear a beep.
To use: Press to dial out to the number stored in the memory
key.
9- VOLUME BOOST ( )
During a call: Press to activate/deactivate the VOLUME BOOST
function.
10- SPEAKER ( )
In Idle mode or Phonebook/ Call list/ Redial list view mode:
Press to make a call with speakerphone.
11- ALPHANUMERIC KEYPAD, STAR ( ), HASH ( )
In predial or editing mode: Press to insert a digit.
0 key in predial or editing mode: Press and hold to insert a pause.
12- NAVIGATION KEYS
UP
(
▲
)
In menu mode: Press to scroll up the menu items.
In Phonebook list / Redial list / Call list: Press to scroll up the list.
In editing mode: Press to move the cursor one character to the left.
During a call or TAM message playback: Press to increase the
volume.
REPEAT/OGM (
)
In Idle mode: Press and hold to record OGM.
Press to playback OGM.
In TAM message playback mode: Press to go back to previous
message.
MEMO/SKIP FORWARD ( )
In Idle mode: Press and hold to record a memo.
In TAM message playback mode: Press to skip to next message.
DOWN/REDIAL LIST
(
▼
)
In idle mode: Press to access the redial list.
In menu mode: Press to scroll down the menu items.
In Phonebook list / Redial list / Call list view mode: Press to
scroll down the list.
In editing mode: Press to move the cursor one character to
the right.
During a call or TAM message playback: Press to decrease
the volume.
13-ANS ON/OFF ( )
In Idle: Press to switch the answering machine ON or OFF.
14. PLAY/STOP ( /)
In idle mode: Press to playback messages.
During TAM message playback: Press to stop playing messages.
15. DELETE ( )
In TAM message playback mode: Press to delete the current
TAM message playback.
In idle mode: Press and hold to delete all old messages.
16. RECALL ( )
During a call: Press to activate Recall for use with Telephone
Network Services such as Call Waiting during a call.
During message playback: Press to call back the caller if the
caller’s number is available
Handset
17- EARPIECE
18. LCD DISPLAY
19. CHARGE LIGHT ( )
Steadily on when the handset is charging in the charger.
20. MENU/OK ( )
In idle mode: Press to access the main menu.
In sub-menu mode: Press to confirm the selection.
During a call: Press to access Intercom / Phonebook / Redial
list / Call list.
21. UP/CALL LIST ( )
In idle mode: Press to access the call list.
In menu mode: Press to scroll up the menu items.
In phonebook list/redial list/call list: Press to scroll up the list.
In editing mode: Press to move the cursor one character to
the left.
During a call: Press to increase the listening volume.
During ringing: Press to increase the ringer volume.
22. TALK ON ( )
In idle/pre-dial mode: Press to make a call in earpiece mode.
In phonebook/redial list/call list: Press to make a call to the
selected entry in the list in earpiece mode.
During ringing: Press to answer a call in earpiece mode.
23. DOWN/REDIAL LIST ( )
In idle mode: Press to access the redial list.
In menu mode: Press to scroll down the menu items.
In phonebook list/redial list/call list: Press to scroll down the
list.
In editing mode: Press to move the cursor one character to
the right.
During a call: Press to decrease the listening volume.
During ringing: Press to decrease the ringer volume.
24. SPEAKERPHONE ( )
In idle/pre-dial mode: Press to make a call in speakerphone
mode. Press again to switch to earpiece mode.
In phonebook list/redial list/call list: Press to make a call to the
selected entry in the list in speakerphone mode. Press again
to switch to earpiece mode.
During ringing: Press to answer a call in speakerphone mode.
Press again to switch to earpiece mode.
25. MICROPHONE
26. VOLUME BOOST ( )
During a call: Press to activate/deactivate the VOLUME
BOOST function.
27. CANCEL/MUTE ( )
In main menu mode: Press to go back to idle screen.
In sub-menu mode: Press to go back to previous menu.
12341234
QUICK USER GUIDE
!!! Please refer to our website: www.geemarc.com for an up to
date user guide, as there may be important updates and
changes you need to be aware of !!!
Congratulations on purchasing your Geemarc AMPLIDECT
COMBI 295 telephone. This telephone offers all the advantages
of cordless technology (compliant with Digitally Enhanced
Cordless Telecommunications-DECT standard) together with
an easy to see big button keypad, ideal for those who suffer
with poor sight. This telephone is also hearing aid compatible.
It is important that you read the instructions below in order to
use your Geemarc telephone to its full potential.
Base
Handset
Connection
CAUTION: Use only the battery provided. There may be a risk
of explosion if a wrong type of battery is used for the parent
unit. The battery cannot be subjected to high or low extreme
temperature and low air pressure at high altitude during use,
storage or transportation. Disposal of battery into fire or a hot
oven, or mechanically crushing or cutting or the battery can
result in an explosion. Leaving the battery in an extremely high
temperature surrounding environment can result in an explosion
or the leakage of flammable liquid of gas. Battery subjected
to extremely low air pressure may result in an explosion or the
leakage of flammable liquid or gas. Dispose of used battery
according to the instructions.
Normal operating temperature for the product (e.g.0oC~40oC).
Use only the adapters and battery listed below.
Power adapter information: output:6V DC 0.45A,2.7W.
Vtech Telecommunications Limited.
Model: VT05EEU06045 (EU), VT05EUK06045 (UK)
Rechargeable Battery Pack: Model:NI-MH AAA500x2.
2.4V, 500mAh. Corun.
WallMounting
PACKAGE CONTENTS
1 Telephone base, 1 Corded handset, 1 cordless Handset, 2
power adapter, 1 Charger, 1 Telephone line cord, 1 NiMh
battery pack, 1 Quick user guide.
INSTALLATION
Connecting the telephone
Connect the telephone cable to the telephone line socket (A)
and to the telephone wall socket (B).
Connect the handset curly cord to the base.
Connect the power adapter jack to base and charger (C) then
connect the power adapter plug in mains power (D).
Note: Use only the power adapters supplied with the phone.
Connecting the battery
Plug the battery connector securely
into the socket inside the handset
battery compartment.
Insert the supplied battery as indicated.
Align the cover flat against the battery compartment, and then
slide it upwards until it clicks into place.
Charging the batteries
Charge the batteries for at least 16 hours when charging for
the first time.
OVERVIEW
Base
1- LCD DISPLAY
2- IN USE ( ) : On during a call.
3- RING light ( )
Flashes when there is an incoming call.
Steadily on when the answering machine is turned on. Flashes
when there are new memos or messages in the answering
machine.
4- MENU/OK ( )
In idle mode: Press to access the main menu.
In sub-menu mode: Press to confirm the selection.
In Redial list/Call list: Press to store the number into Phonebook.
5- PHONEBOOK ( )
In Idle: Press to access the phonebook.
6- CALLS (CALL LIST) ( )
In Idle mode: Press to access the call list.
7- INT/MUTE/CLEAR ( )
In main menu mode: Press to go back to idle screen.
In sub-menu mode: Press to go back to previous level.
In sub-menu mode: Press and hold to go back to idle screen.
In editing / predialing mode: Press to clear a character / digit.
In editing / predialing mode: Press and hold to delete all the
character /digits
During a call: Press to mute / unmute the microphone.
In ringing: Press to silence the base ringer.
In idle mode: Press to intercom another system handset.
8- MEMORY KEYS (3 PHOTO SPEED DIAL KEYS;
1 MEMORY KEY - M4)
In idle mode: Dial your phone number and Press and hold the
memory key until to hear a beep.
To use: Press to dial out to the number stored in the memory
key.
9- VOLUME BOOST ( )
During a call: Press to activate/deactivate the VOLUME BOOST
function.
10- SPEAKER ( )
In Idle mode or Phonebook/ Call list/ Redial list view mode:
Press to make a call with speakerphone.
11- ALPHANUMERIC KEYPAD, STAR ( ), HASH ( )
In predial or editing mode: Press to insert a digit.
0 key in predial or editing mode: Press and hold to insert a pause.
12- NAVIGATION KEYS
UP
(
▲
)
In menu mode: Press to scroll up the menu items.
In Phonebook list / Redial list / Call list: Press to scroll up the list.
In editing mode: Press to move the cursor one character to the left.
During a call or TAM message playback: Press to increase the
volume.
REPEAT/OGM (
)
In Idle mode: Press and hold to record OGM.
Press to playback OGM.
In TAM message playback mode: Press to go back to previous
message.
MEMO/SKIP FORWARD ( )
In Idle mode: Press and hold to record a memo.
In TAM message playback mode: Press to skip to next message.
DOWN/REDIAL LIST
(
▼
)
In idle mode: Press to access the redial list.
In menu mode: Press to scroll down the menu items.
In Phonebook list / Redial list / Call list view mode: Press to
scroll down the list.
In editing mode: Press to move the cursor one character to
the right.
During a call or TAM message playback: Press to decrease
the volume.
13-ANS ON/OFF ( )
In Idle: Press to switch the answering machine ON or OFF.
14. PLAY/STOP ( /)
In idle mode: Press to playback messages.
During TAM message playback: Press to stop playing messages.
15. DELETE ( )
In TAM message playback mode: Press to delete the current
TAM message playback.
In idle mode: Press and hold to delete all old messages.
16. RECALL ( )
During a call: Press to activate Recall for use with Telephone
Network Services such as Call Waiting during a call.
During message playback: Press to call back the caller if the
caller’s number is available
Handset
17- EARPIECE
18. LCD DISPLAY
19. CHARGE LIGHT ( )
Steadily on when the handset is charging in the charger.
20. MENU/OK ( )
In idle mode: Press to access the main menu.
In sub-menu mode: Press to confirm the selection.
During a call: Press to access Intercom / Phonebook / Redial
list / Call list.
21. UP/CALL LIST ( )
In idle mode: Press to access the call list.
In menu mode: Press to scroll up the menu items.
In phonebook list/redial list/call list: Press to scroll up the list.
In editing mode: Press to move the cursor one character to
the left.
During a call: Press to increase the listening volume.
During ringing: Press to increase the ringer volume.
22. TALK ON ( )
In idle/pre-dial mode: Press to make a call in earpiece mode.
In phonebook/redial list/call list: Press to make a call to the
selected entry in the list in earpiece mode.
During ringing: Press to answer a call in earpiece mode.
23. DOWN/REDIAL LIST ( )
In idle mode: Press to access the redial list.
In menu mode: Press to scroll down the menu items.
In phonebook list/redial list/call list: Press to scroll down the
list.
In editing mode: Press to move the cursor one character to
the right.
During a call: Press to decrease the listening volume.
During ringing: Press to decrease the ringer volume.
24. SPEAKERPHONE ( )
In idle/pre-dial mode: Press to make a call in speakerphone
mode. Press again to switch to earpiece mode.
In phonebook list/redial list/call list: Press to make a call to the
selected entry in the list in speakerphone mode. Press again
to switch to earpiece mode.
During ringing: Press to answer a call in speakerphone mode.
Press again to switch to earpiece mode.
25. MICROPHONE
26. VOLUME BOOST ( )
During a call: Press to activate/deactivate the VOLUME
BOOST function.
27. CANCEL/MUTE ( )
In main menu mode: Press to go back to idle screen.
In sub-menu mode: Press to go back to previous menu.
12341234
QUICK USER GUIDE
!!! Please refer to our website: www.geemarc.com for an up to
date user guide, as there may be important updates and
changes you need to be aware of !!!
Congratulations on purchasing your Geemarc AMPLIDECT
COMBI 295 telephone. This telephone offers all the advantages
of cordless technology (compliant with Digitally Enhanced
Cordless Telecommunications-DECT standard) together with
an easy to see big button keypad, ideal for those who suffer
with poor sight. This telephone is also hearing aid compatible.
It is important that you read the instructions below in order to
use your Geemarc telephone to its full potential.
Base
Handset
Connection
CAUTION: Use only the battery provided. There may be a risk
of explosion if a wrong type of battery is used for the parent
unit. The battery cannot be subjected to high or low extreme
temperature and low air pressure at high altitude during use,
storage or transportation. Disposal of battery into fire or a hot
oven, or mechanically crushing or cutting or the battery can
result in an explosion. Leaving the battery in an extremely high
temperature surrounding environment can result in an explosion
or the leakage of flammable liquid of gas. Battery subjected
to extremely low air pressure may result in an explosion or the
leakage of flammable liquid or gas. Dispose of used battery
according to the instructions.
Normal operating temperature for the product (e.g.0oC~40oC).
Use only the adapters and battery listed below.
Power adapter information: output:6V DC 0.45A,2.7W.
Vtech Telecommunications Limited.
Model: VT05EEU06045 (EU), VT05EUK06045 (UK)
Rechargeable Battery Pack: Model:NI-MH AAA500x2.
2.4V, 500mAh. Corun.
WallMounting
PACKAGE CONTENTS
1 Telephone base, 1 Corded handset, 1 cordless Handset, 2
power adapter, 1 Charger, 1 Telephone line cord, 1 NiMh
battery pack, 1 Quick user guide.
INSTALLATION
Connecting the telephone
Connect the telephone cable to the telephone line socket (A)
and to the telephone wall socket (B).
Connect the handset curly cord to the base.
Connect the power adapter jack to base and charger (C) then
connect the power adapter plug in mains power (D).
Note: Use only the power adapters supplied with the phone.
Connecting the battery
Plug the battery connector securely
into the socket inside the handset
battery compartment.
Insert the supplied battery as indicated.
Align the cover flat against the battery compartment, and then
slide it upwards until it clicks into place.
Charging the batteries
Charge the batteries for at least 16 hours when charging for
the first time.
OVERVIEW
Base
1- LCD DISPLAY
2- IN USE ( ) : On during a call.
3- RING light ( )
Flashes when there is an incoming call.
Steadily on when the answering machine is turned on. Flashes
when there are new memos or messages in the answering
machine.
4- MENU/OK ( )
In idle mode: Press to access the main menu.
In sub-menu mode: Press to confirm the selection.
In Redial list/Call list: Press to store the number into Phonebook.
5- PHONEBOOK ( )
In Idle: Press to access the phonebook.
6- CALLS (CALL LIST) ( )
In Idle mode: Press to access the call list.
7- INT/MUTE/CLEAR ( )
In main menu mode: Press to go back to idle screen.
In sub-menu mode: Press to go back to previous level.
In sub-menu mode: Press and hold to go back to idle screen.
In editing / predialing mode: Press to clear a character / digit.
In editing / predialing mode: Press and hold to delete all the
character /digits
During a call: Press to mute / unmute the microphone.
In ringing: Press to silence the base ringer.
In idle mode: Press to intercom another system handset.
8- MEMORY KEYS (3 PHOTO SPEED DIAL KEYS;
1 MEMORY KEY - M4)
In idle mode: Dial your phone number and Press and hold the
memory key until to hear a beep.
To use: Press to dial out to the number stored in the memory
key.
9- VOLUME BOOST ( )
During a call: Press to activate/deactivate the VOLUME BOOST
function.
10- SPEAKER ( )
In Idle mode or Phonebook/ Call list/ Redial list view mode:
Press to make a call with speakerphone.
11- ALPHANUMERIC KEYPAD, STAR ( ), HASH ( )
In predial or editing mode: Press to insert a digit.
0 key in predial or editing mode: Press and hold to insert a pause.
12- NAVIGATION KEYS
UP
(
▲
)
In menu mode: Press to scroll up the menu items.
In Phonebook list / Redial list / Call list: Press to scroll up the list.
In editing mode: Press to move the cursor one character to the left.
During a call or TAM message playback: Press to increase the
volume.
REPEAT/OGM (
)
In Idle mode: Press and hold to record OGM.
Press to playback OGM.
In TAM message playback mode: Press to go back to previous
message.
MEMO/SKIP FORWARD ( )
In Idle mode: Press and hold to record a memo.
In TAM message playback mode: Press to skip to next message.
DOWN/REDIAL LIST
(
▼
)
In idle mode: Press to access the redial list.
In menu mode: Press to scroll down the menu items.
In Phonebook list / Redial list / Call list view mode: Press to
scroll down the list.
In editing mode: Press to move the cursor one character to
the right.
During a call or TAM message playback: Press to decrease
the volume.
13-ANS ON/OFF ( )
In Idle: Press to switch the answering machine ON or OFF.
14. PLAY/STOP ( /)
In idle mode: Press to playback messages.
During TAM message playback: Press to stop playing messages.
15. DELETE ( )
In TAM message playback mode: Press to delete the current
TAM message playback.
In idle mode: Press and hold to delete all old messages.
16. RECALL ( )
During a call: Press to activate Recall for use with Telephone
Network Services such as Call Waiting during a call.
During message playback: Press to call back the caller if the
caller’s number is available
Handset
17- EARPIECE
18. LCD DISPLAY
19. CHARGE LIGHT ( )
Steadily on when the handset is charging in the charger.
20. MENU/OK ( )
In idle mode: Press to access the main menu.
In sub-menu mode: Press to confirm the selection.
During a call: Press to access Intercom / Phonebook / Redial
list / Call list.
21. UP/CALL LIST ( )
In idle mode: Press to access the call list.
In menu mode: Press to scroll up the menu items.
In phonebook list/redial list/call list: Press to scroll up the list.
In editing mode: Press to move the cursor one character to
the left.
During a call: Press to increase the listening volume.
During ringing: Press to increase the ringer volume.
22. TALK ON ( )
In idle/pre-dial mode: Press to make a call in earpiece mode.
In phonebook/redial list/call list: Press to make a call to the
selected entry in the list in earpiece mode.
During ringing: Press to answer a call in earpiece mode.
23. DOWN/REDIAL LIST ( )
In idle mode: Press to access the redial list.
In menu mode: Press to scroll down the menu items.
In phonebook list/redial list/call list: Press to scroll down the
list.
In editing mode: Press to move the cursor one character to
the right.
During a call: Press to decrease the listening volume.
During ringing: Press to decrease the ringer volume.
24. SPEAKERPHONE ( )
In idle/pre-dial mode: Press to make a call in speakerphone
mode. Press again to switch to earpiece mode.
In phonebook list/redial list/call list: Press to make a call to the
selected entry in the list in speakerphone mode. Press again
to switch to earpiece mode.
During ringing: Press to answer a call in speakerphone mode.
Press again to switch to earpiece mode.
25. MICROPHONE
26. VOLUME BOOST ( )
During a call: Press to activate/deactivate the VOLUME
BOOST function.
27. CANCEL/MUTE ( )
In main menu mode: Press to go back to idle screen.
In sub-menu mode: Press to go back to previous menu.
12341234
QUICK USER GUIDE
!!! Please refer to our website: www.geemarc.com for an up to
date user guide, as there may be important updates and
changes you need to be aware of !!!
Congratulations on purchasing your Geemarc AMPLIDECT
COMBI 295 telephone. This telephone offers all the advantages
of cordless technology (compliant with Digitally Enhanced
Cordless Telecommunications-DECT standard) together with
an easy to see big button keypad, ideal for those who suffer
with poor sight. This telephone is also hearing aid compatible.
It is important that you read the instructions below in order to
use your Geemarc telephone to its full potential.
Base
Handset
Connection
CAUTION: Use only the battery provided. There may be a risk
of explosion if a wrong type of battery is used for the parent
unit. The battery cannot be subjected to high or low extreme
temperature and low air pressure at high altitude during use,
storage or transportation. Disposal of battery into fire or a hot
oven, or mechanically crushing or cutting or the battery can
result in an explosion. Leaving the battery in an extremely high
temperature surrounding environment can result in an explosion
or the leakage of flammable liquid of gas. Battery subjected
to extremely low air pressure may result in an explosion or the
leakage of flammable liquid or gas. Dispose of used battery
according to the instructions.
Normal operating temperature for the product (e.g.0oC~40oC).
Use only the adapters and battery listed below.
Power adapter information: output:6V DC 0.45A,2.7W.
Vtech Telecommunications Limited.
Model: VT05EEU06045 (EU), VT05EUK06045 (UK)
Rechargeable Battery Pack: Model:NI-MH AAA500x2.
2.4V, 500mAh. Corun.
WallMounting
PACKAGE CONTENTS
1 Telephone base, 1 Corded handset, 1 cordless Handset, 2
power adapter, 1 Charger, 1 Telephone line cord, 1 NiMh
battery pack, 1 Quick user guide.
INSTALLATION
Connecting the telephone
Connect the telephone cable to the telephone line socket (A)
and to the telephone wall socket (B).
Connect the handset curly cord to the base.
Connect the power adapter jack to base and charger (C) then
connect the power adapter plug in mains power (D).
Note: Use only the power adapters supplied with the phone.
Connecting the battery
Plug the battery connector securely
into the socket inside the handset
battery compartment.
Insert the supplied battery as indicated.
Align the cover flat against the battery compartment, and then
slide it upwards until it clicks into place.
Charging the batteries
Charge the batteries for at least 16 hours when charging for
the first time.
OVERVIEW
Base
1- LCD DISPLAY
2- IN USE ( ) : On during a call.
3- RING light ( )
Flashes when there is an incoming call.
Steadily on when the answering machine is turned on. Flashes
when there are new memos or messages in the answering
machine.
4- MENU/OK ( )
In idle mode: Press to access the main menu.
In sub-menu mode: Press to confirm the selection.
In Redial list/Call list: Press to store the number into Phonebook.
5- PHONEBOOK ( )
In Idle: Press to access the phonebook.
6- CALLS (CALL LIST) ( )
In Idle mode: Press to access the call list.
7- INT/MUTE/CLEAR ( )
In main menu mode: Press to go back to idle screen.
In sub-menu mode: Press to go back to previous level.
In sub-menu mode: Press and hold to go back to idle screen.
In editing / predialing mode: Press to clear a character / digit.
In editing / predialing mode: Press and hold to delete all the
character /digits
During a call: Press to mute / unmute the microphone.
In ringing: Press to silence the base ringer.
In idle mode: Press to intercom another system handset.
8- MEMORY KEYS (3 PHOTO SPEED DIAL KEYS;
1 MEMORY KEY - M4)
In idle mode: Dial your phone number and Press and hold the
memory key until to hear a beep.
To use: Press to dial out to the number stored in the memory
key.
9- VOLUME BOOST ( )
During a call: Press to activate/deactivate the VOLUME BOOST
function.
10- SPEAKER ( )
In Idle mode or Phonebook/ Call list/ Redial list view mode:
Press to make a call with speakerphone.
11- ALPHANUMERIC KEYPAD, STAR ( ), HASH ( )
In predial or editing mode: Press to insert a digit.
0 key in predial or editing mode: Press and hold to insert a pause.
12- NAVIGATION KEYS
UP
(
▲
)
In menu mode: Press to scroll up the menu items.
In Phonebook list / Redial list / Call list: Press to scroll up the list.
In editing mode: Press to move the cursor one character to the left.
During a call or TAM message playback: Press to increase the
volume.
REPEAT/OGM (
)
In Idle mode: Press and hold to record OGM.
Press to playback OGM.
In TAM message playback mode: Press to go back to previous
message.
MEMO/SKIP FORWARD ( )
In Idle mode: Press and hold to record a memo.
In TAM message playback mode: Press to skip to next message.
DOWN/REDIAL LIST
(
▼
)
In idle mode: Press to access the redial list.
In menu mode: Press to scroll down the menu items.
In Phonebook list / Redial list / Call list view mode: Press to
scroll down the list.
In editing mode: Press to move the cursor one character to
the right.
During a call or TAM message playback: Press to decrease
the volume.
13-ANS ON/OFF ( )
In Idle: Press to switch the answering machine ON or OFF.
14. PLAY/STOP ( /)
In idle mode: Press to playback messages.
During TAM message playback: Press to stop playing messages.
15. DELETE ( )
In TAM message playback mode: Press to delete the current
TAM message playback.
In idle mode: Press and hold to delete all old messages.
16. RECALL ( )
During a call: Press to activate Recall for use with Telephone
Network Services such as Call Waiting during a call.
During message playback: Press to call back the caller if the
caller’s number is available
Handset
17- EARPIECE
18. LCD DISPLAY
19. CHARGE LIGHT ( )
Steadily on when the handset is charging in the charger.
20. MENU/OK ( )
In idle mode: Press to access the main menu.
In sub-menu mode: Press to confirm the selection.
During a call: Press to access Intercom / Phonebook / Redial
list / Call list.
21. UP/CALL LIST ( )
In idle mode: Press to access the call list.
In menu mode: Press to scroll up the menu items.
In phonebook list/redial list/call list: Press to scroll up the list.
In editing mode: Press to move the cursor one character to
the left.
During a call: Press to increase the listening volume.
During ringing: Press to increase the ringer volume.
22. TALK ON ( )
In idle/pre-dial mode: Press to make a call in earpiece mode.
In phonebook/redial list/call list: Press to make a call to the
selected entry in the list in earpiece mode.
During ringing: Press to answer a call in earpiece mode.
23. DOWN/REDIAL LIST ( )
In idle mode: Press to access the redial list.
In menu mode: Press to scroll down the menu items.
In phonebook list/redial list/call list: Press to scroll down the
list.
In editing mode: Press to move the cursor one character to
the right.
During a call: Press to decrease the listening volume.
During ringing: Press to decrease the ringer volume.
24. SPEAKERPHONE ( )
In idle/pre-dial mode: Press to make a call in speakerphone
mode. Press again to switch to earpiece mode.
In phonebook list/redial list/call list: Press to make a call to the
selected entry in the list in speakerphone mode. Press again
to switch to earpiece mode.
During ringing: Press to answer a call in speakerphone mode.
Press again to switch to earpiece mode.
25. MICROPHONE
26. VOLUME BOOST ( )
During a call: Press to activate/deactivate the VOLUME
BOOST function.
27. CANCEL/MUTE ( )
In main menu mode: Press to go back to idle screen.
In sub-menu mode: Press to go back to previous menu.
5678
In sub-menu mode: Press and hold to go back to idle screen.
In editing / pre-dial mode: Press to delete a character/digit.
In editing / pre-dial mode: Press and hold to delete all the
characters / digits.
During a call: Press to mute/resume the microphone.
During ringing: Press to silence the handset ringer.
In idle mode: Press to intercom another handset.
28. TALK OFF ( )
During a call: Press to end a call and go back to idle screen In
menu/editing mode: Press to go back to previous menu.
In menu/editing mode: Press and hold to go back to idle screen.
In idle mode: Press and hold to power off the handset.
Press and hold to power on when it is off.
29. ALPHANUMERIC KEYPAD, STAR ( ), HASH ( )
In predial or editing mode: Press to insert a digit /character / /.
key in idle mode: Press and hold to enable or disable the
keypad lock.
key in idle mode: Press and hold to turn on/off the ringer.
0key in idle/pre-dial mode/number editing mode: Press
and hold to insert a pause.
30. R
During a call: Press to answer a new call if you subscribed to
Call Waiting service from your service provider.
31. PHONEBOOK ( )
In idle mode: Press to access the phonebook.
The phone settings are always set in the same manner:
Press Menu/OK button to open the main menu. Then
use the ▼▲buttons to select an entry and confirm it by
pressing the Menu/OK button.
The factory preset PIN code is 0000
Example:
Set the language on the base
Press MENU / OK, then select ▼▲language, press
MENU / OK , then select ▼▲desired language and then
press MENU / OK to confirm.
Set the language on the handset
Press MENU / OK , then select ▼▲HS settings, press
MENU / OK , then select ▼▲language, press MENU /
OK , than select ▼▲desired language and then press
MENU / OK to confirm.
MENU SETTING
Base
PHONEBOOK
►VIEW►ADD►EDIT►DELETE►DELETE ALL►PB STATUS
CALL LOG : ►MISSED ►RECEIVED ►DIALLED
DATE & TIME : ►TIME FORMAT ►SET CLOCK
LANGUAGE
►ENGLISH ►DEUTSCH ►FRANÇAIS ►ITALIANO
►NEDERLANDS…
SETTINGS
►RING SETUP ►DELETE HS ►DIAL MODE ►FLASH TIME
►KEY TONE ►CHANGE PIN ►BS DEFAULT
PAGE ALL HS
REGISTRATION
ANS. MACHINE
►MSG PLAYBACK ►DELETE ALL ►MEMO ►TAM ON/OFF
►TAM SETTINGS (ANSWER MODE, OGM SETTINGS,
ANSWER DELAY, RECORD TIME, TAM LANGUAGE, BS
SCREENING, REMOTE ACC, COMPRESSION, CHANGE PIN,
TAM DEFAULT)
Handset
PHONEBOOK
►VIEW LIST
under an entry: ►ADD ►VIEW ►EDIT ►DELETE
►DELETE ALL ►PB STATUS ►FASTDIAL
CALL LIST
►VIEW LIST
under an entry: ►ADD TO PB ►DELETE ►DELETE ALL
►DETAILS ►CATEGORY
BS SETTINGS
►BS RINGER ►RING VOLUME ►DELETEHS
►DIAL MODE ►FLASH TIME►CHANGE PIN
HS SETTINGS
►RING SETUP►TONE SETUP►SELECT BASE
►LANGUAGE ►RENAME HS ►HS DISPLAY ►AUTO
ANSWER
DIRECT MEM : ►M1-M2-M3-M4
DATE & TIME
►DATE FORMAT ►TIME FORMAT ►SET TIME ►SET DATE
ALARM : ►ON ►OFF
REGISTRATION : ►BASE 1, 2, 3 or 4
DEFAULT : ►PIN? ----
ANS. MACHINE
►MSG PLAYBACK ►DELETE ALL ►MEMO ►TAM ON/OFF
►TAM SETTINGS (ANSWER MODE, TAM LANGUAGE,
OGM SETTINGS, ANSWER DELAY, RECORD TIME,
COMPRESSION, BS SCREENING,REMOTE ACC,
CHANGE PIN)
REGISTRATION & DE-REGISTRATION
Note: Handset and base station are pre-registered.
Up to 4 handsets can be registered to a single base station.
In the case of re-registration, the PIN code is 0000.
Registration a handset
On Handset:Press MENU/OK select▼▲ REGISTRATION,
Press MENU/OK select ▼▲BASE(1-4), Press MENU/OK
enter PIN.
At the same time on Base: Press MENU/OK , select ▼▲
REGISTRATION, press MENU/OK to see PLEASE WAIT
(If the registration is successful, there will be a confirmation beep).
De-Registration
On Base: Press MENU/OK , select ▼▲SETTINGS,
press MENU/OK
select ▼▲DELETE HS, press MENU/OK enter PIN,
press MENU/OK
select ▼▲one of the handsets that you want to de-register,
press MENU/ OK to confirm.
INTERCOM
Internal Call
Base: Press INT/ /CLEAR ( ), select ▼▲HS 1 -
5, press MENU /OK to connect.
Handset: Press C/MUTE , Enter the desired handset
number on keypad.
Base is "7"
Call All Handsets
Base: Press INT/ /CLEAR ( ), select ▼▲ALL
HANDSETS, press MENU /OK to connect.
Handset: Press C / MUTE , Enter "9" on keypad.
Transfer an External Call
Base: Press MENU /OK , select ▼▲handset number, press
or on handset. After connection quit the call on base.
Handset: Press MENU / OK , select ▼▲INTERCOM,
Press MENU / OK ,
Enter the desired handset number on keypad. After connection
quit the call on handset.
Conference Call
Handset: Press MENU / OK , select ▼▲INTERCOM,
Press MENU / OK ,
Enter the desired handset number on keypad.
After connection press and hold until CONFERENCE is
shown.
Your telephone base includes a telephone answering machine
that records unanswered calls when it is on. The answering
machine can store up to 59 messages within the maximum
recording time of approximately 15 minutes. As well as recording
incoming messages, you can record memos for other users of
your phone.
Press ANS ON/OFF to switch the answering machine
ON or OFF
REMOTE OPERATIONS
If you are away from your home, you can call your answering
machine to switch on or off the answering machine and listen
to your messages remotely using another tone-dialing phone.
1. Place a call from a tone-dialing phone.
2. When the answering machine answers the call and starts
playing OGM, press .
3. Enter the 4-digit Remote Access PIN (default PIN is 0000).
4. Press the following keys to carry out your desired function.
AFunctions
While message is not playing While message is playing
2Delete the current message playbac
k
4
Repeat playing the current message
from the beginning. Press twice to
skip backward to the previous
messa
g
e.
5Play the message
6Skip forward to play the next message
7Turn on the answering machine
8Stop the current message playbac
k
9Turn off the answering machine
*Enter the 4-digit remote access
PIN
NOTE:
When your answering machine memory is full and the
answer mode is in ANS & RECORD, the answer mode will
change to ANSWER ONLY automatically.
It will change to ANS & RECORD mode automatically after
some messages have been deleted.
You cannot delete new messages before they were listened.
MAINTENANCE
Clean the surface of the housing with a soft, fluff-free cloth.
Do not use any cleaning agents or solvents.
GUARANTEE
From the moment your Geemarc AMPLIDECT COMBI 295 is
purchased, Geemarc guarantee it for the period of two years.
During this time, all repairs or replacements (at our discretion)
are free of charge. Should you experience a problem then
contact our help line or visit our website at www.geemarc.com.
The guarantee does not cover accidents, negligence or
breakages to any parts. The product must not be tampered
with or taken apart by anyone who is not an authorized
Geemarc representative.
The Geemarc guarantee in no way limits your legal rights.
IMPORTANT: YOUR RECEIPT IS PART OF YOUR
GUARANTEE AND MUST BE RETAINED AND PRODUCED
IN THE EVENT OF A WARRANTY CLAIM.
Please note: The guarantee applies to the United Kingdom only.
DECLARATIONS:
UKCA Directives
Geemarc Telecom SA hereby declares that this AMPLIDECT
COMBI 295 is in compliance with the essential requirements
and other relevant provisions of the Radio Equipment Directive
2014/53/UE.
The UKCA declaration of conformity may be consulted at
www.geemarc.com
RF powe
r
< 250mW
Power Supply
Base and Charge
r
Input 100-240V 50/60Hz;
Output DC6V 0.45A, 2.7W adapte
r
Cordless Handset 2.4V, 500mAH rechargeable NiMh battery pack
Electrical connection: The apparatus is designed to operate
from a 230V 50Hz supply only. (Classified as hazardous
voltage according to EN62368-1 standard). The apparatus
does not incorporate an integral power on/off switch. To switch
off the apparatus, disconnect the power adaptor.
When installing the apparatus, ensure that the mains power
socket is readily accessible.
Telephone connection:
Voltages present on the telecommunication network are
classified TNV-3 (Telecommunication Network Voltage)
according to the EN62368-1 standard.
Recycling Directives
The WEEE (Waste Electrical and Electronic Equipment) has
been put in place for the products at the end of their useful
life are recycled in the best way.
When this product is finished with, please do not put it in your
domestic waste bin. Please use one of the following disposal
options:
- Remove the batteries and deposit them in an appropriate
WEEE skip.
Deposit the product in an appropriate WEEE skip.
- Or, hand the old product to the retailer. If you purchase a
new one, they should accept it.
Thus if you respect these instructions you ensure human
health and environmental protection.
For product support and help visit our website at
www.geemarc.com
E-mail : help@geemarc.com
telephone 01707 387602
lines are open 09h00 to 16h00 Mon to Fri
Parc de l’Etoile, 2 Rue Galilée, 59760 Grande-Synthe,France.
Manufacturer: Vtech (Dongguan) Telecommunications Limited.
Vtech Science Park, Xia Ling Bei Management Zone, Liaobu, Dongguan,
Guangdong.
This product is made in China To Geemarc Telecom
UGAMPLIDECTCOMBI295_En_A3_V1.7
5678
In sub-menu mode: Press and hold to go back to idle screen.
In editing / pre-dial mode: Press to delete a character/digit.
In editing / pre-dial mode: Press and hold to delete all the
characters / digits.
During a call: Press to mute/resume the microphone.
During ringing: Press to silence the handset ringer.
In idle mode: Press to intercom another handset.
28. TALK OFF ( )
During a call: Press to end a call and go back to idle screen In
menu/editing mode: Press to go back to previous menu.
In menu/editing mode: Press and hold to go back to idle screen.
In idle mode: Press and hold to power off the handset.
Press and hold to power on when it is off.
29. ALPHANUMERIC KEYPAD, STAR ( ), HASH ( )
In predial or editing mode: Press to insert a digit /character / /.
key in idle mode: Press and hold to enable or disable the
keypad lock.
key in idle mode: Press and hold to turn on/off the ringer.
0key in idle/pre-dial mode/number editing mode: Press
and hold to insert a pause.
30. R
During a call: Press to answer a new call if you subscribed to
Call Waiting service from your service provider.
31. PHONEBOOK ( )
In idle mode: Press to access the phonebook.
The phone settings are always set in the same manner:
Press Menu/OK button to open the main menu. Then
use the ▼▲buttons to select an entry and confirm it by
pressing the Menu/OK button.
The factory preset PIN code is 0000
Example:
Set the language on the base
Press MENU / OK, then select ▼▲language, press
MENU / OK , then select ▼▲desired language and then
press MENU / OK to confirm.
Set the language on the handset
Press MENU / OK , then select ▼▲HS settings, press
MENU / OK , then select ▼▲language, press MENU /
OK , than select ▼▲desired language and then press
MENU / OK to confirm.
MENU SETTING
Base
PHONEBOOK
►VIEW►ADD►EDIT►DELETE►DELETE ALL►PB STATUS
CALL LOG : ►MISSED ►RECEIVED ►DIALLED
DATE & TIME : ►TIME FORMAT ►SET CLOCK
LANGUAGE
►ENGLISH ►DEUTSCH ►FRANÇAIS ►ITALIANO
►NEDERLANDS…
SETTINGS
►RING SETUP ►DELETE HS ►DIAL MODE ►FLASH TIME
►KEY TONE ►CHANGE PIN ►BS DEFAULT
PAGE ALL HS
REGISTRATION
ANS. MACHINE
►MSG PLAYBACK ►DELETE ALL ►MEMO ►TAM ON/OFF
►TAM SETTINGS (ANSWER MODE, OGM SETTINGS,
ANSWER DELAY, RECORD TIME, TAM LANGUAGE, BS
SCREENING, REMOTE ACC, COMPRESSION, CHANGE PIN,
TAM DEFAULT)
Handset
PHONEBOOK
►VIEW LIST
under an entry: ►ADD ►VIEW ►EDIT ►DELETE
►DELETE ALL ►PB STATUS ►FASTDIAL
CALL LIST
►VIEW LIST
under an entry: ►ADD TO PB ►DELETE ►DELETE ALL
►DETAILS ►CATEGORY
BS SETTINGS
►BS RINGER ►RING VOLUME ►DELETEHS
►DIAL MODE ►FLASH TIME►CHANGE PIN
HS SETTINGS
►RING SETUP►TONE SETUP►SELECT BASE
►LANGUAGE ►RENAME HS ►HS DISPLAY ►AUTO
ANSWER
DIRECT MEM : ►M1-M2-M3-M4
DATE & TIME
►DATE FORMAT ►TIME FORMAT ►SET TIME ►SET DATE
ALARM : ►ON ►OFF
REGISTRATION : ►BASE 1, 2, 3 or 4
DEFAULT : ►PIN? ----
ANS. MACHINE
►MSG PLAYBACK ►DELETE ALL ►MEMO ►TAM ON/OFF
►TAM SETTINGS (ANSWER MODE, TAM LANGUAGE,
OGM SETTINGS, ANSWER DELAY, RECORD TIME,
COMPRESSION, BS SCREENING,REMOTE ACC,
CHANGE PIN)
REGISTRATION & DE-REGISTRATION
Note: Handset and base station are pre-registered.
Up to 4 handsets can be registered to a single base station.
In the case of re-registration, the PIN code is 0000.
Registration a handset
On Handset:Press MENU/OK select▼▲ REGISTRATION,
Press MENU/OK select ▼▲BASE(1-4), Press MENU/OK
enter PIN.
At the same time on Base: Press MENU/OK , select ▼▲
REGISTRATION, press MENU/OK to see PLEASE WAIT
(If the registration is successful, there will be a confirmation beep).
De-Registration
On Base: Press MENU/OK , select ▼▲SETTINGS,
press MENU/OK
select ▼▲DELETE HS, press MENU/OK enter PIN,
press MENU/OK
select ▼▲one of the handsets that you want to de-register,
press MENU/ OK to confirm.
INTERCOM
Internal Call
Base: Press INT/ /CLEAR ( ), select ▼▲HS 1 -
5, press MENU /OK to connect.
Handset: Press C/MUTE , Enter the desired handset
number on keypad.
Base is "7"
Call All Handsets
Base: Press INT/ /CLEAR ( ), select ▼▲ALL
HANDSETS, press MENU /OK to connect.
Handset: Press C / MUTE , Enter "9" on keypad.
Transfer an External Call
Base: Press MENU /OK , select ▼▲handset number, press
or on handset. After connection quit the call on base.
Handset: Press MENU / OK , select ▼▲INTERCOM,
Press MENU / OK ,
Enter the desired handset number on keypad. After connection
quit the call on handset.
Conference Call
Handset: Press MENU / OK , select ▼▲INTERCOM,
Press MENU / OK ,
Enter the desired handset number on keypad.
After connection press and hold until CONFERENCE is
shown.
Your telephone base includes a telephone answering machine
that records unanswered calls when it is on. The answering
machine can store up to 59 messages within the maximum
recording time of approximately 15 minutes. As well as recording
incoming messages, you can record memos for other users of
your phone.
Press ANS ON/OFF to switch the answering machine
ON or OFF
REMOTE OPERATIONS
If you are away from your home, you can call your answering
machine to switch on or off the answering machine and listen
to your messages remotely using another tone-dialing phone.
1. Place a call from a tone-dialing phone.
2. When the answering machine answers the call and starts
playing OGM, press .
3. Enter the 4-digit Remote Access PIN (default PIN is 0000).
4. Press the following keys to carry out your desired function.
AFunctions
While message is not playing While message is playing
2Delete the current message playbac
k
4
Repeat playing the current message
from the beginning. Press twice to
skip backward to the previous
messa
g
e.
5Play the message
6Skip forward to play the next message
7Turn on the answering machine
8Stop the current message playbac
k
9Turn off the answering machine
*Enter the 4-digit remote access
PIN
NOTE:
When your answering machine memory is full and the
answer mode is in ANS & RECORD, the answer mode will
change to ANSWER ONLY automatically.
It will change to ANS & RECORD mode automatically after
some messages have been deleted.
You cannot delete new messages before they were listened.
MAINTENANCE
Clean the surface of the housing with a soft, fluff-free cloth.
Do not use any cleaning agents or solvents.
GUARANTEE
From the moment your Geemarc AMPLIDECT COMBI 295 is
purchased, Geemarc guarantee it for the period of two years.
During this time, all repairs or replacements (at our discretion)
are free of charge. Should you experience a problem then
contact our help line or visit our website at www.geemarc.com.
The guarantee does not cover accidents, negligence or
breakages to any parts. The product must not be tampered
with or taken apart by anyone who is not an authorized
Geemarc representative.
The Geemarc guarantee in no way limits your legal rights.
IMPORTANT: YOUR RECEIPT IS PART OF YOUR
GUARANTEE AND MUST BE RETAINED AND PRODUCED
IN THE EVENT OF A WARRANTY CLAIM.
Please note: The guarantee applies to the United Kingdom only.
DECLARATIONS:
UKCA Directives
Geemarc Telecom SA hereby declares that this AMPLIDECT
COMBI 295 is in compliance with the essential requirements
and other relevant provisions of the Radio Equipment Directive
2014/53/UE.
The UKCA declaration of conformity may be consulted at
www.geemarc.com
RF powe
r
< 250mW
Power Supply
Base and Charge
r
Input 100-240V 50/60Hz;
Output DC6V 0.45A, 2.7W adapte
r
Cordless Handset 2.4V, 500mAH rechargeable NiMh battery pack
Electrical connection: The apparatus is designed to operate
from a 230V 50Hz supply only. (Classified as hazardous
voltage according to EN62368-1 standard). The apparatus
does not incorporate an integral power on/off switch. To switch
off the apparatus, disconnect the power adaptor.
When installing the apparatus, ensure that the mains power
socket is readily accessible.
Telephone connection:
Voltages present on the telecommunication network are
classified TNV-3 (Telecommunication Network Voltage)
according to the EN62368-1 standard.
Recycling Directives
The WEEE (Waste Electrical and Electronic Equipment) has
been put in place for the products at the end of their useful
life are recycled in the best way.
When this product is finished with, please do not put it in your
domestic waste bin. Please use one of the following disposal
options:
- Remove the batteries and deposit them in an appropriate
WEEE skip.
Deposit the product in an appropriate WEEE skip.
- Or, hand the old product to the retailer. If you purchase a
new one, they should accept it.
Thus if you respect these instructions you ensure human
health and environmental protection.
For product support and help visit our website at
www.geemarc.com
E-mail : help@geemarc.com
telephone 01707 387602
lines are open 09h00 to 16h00 Mon to Fri
Parc de l’Etoile, 2 Rue Galilée, 59760 Grande-Synthe,France.
Manufacturer: Vtech (Dongguan) Telecommunications Limited.
Vtech Science Park, Xia Ling Bei Management Zone, Liaobu, Dongguan,
Guangdong.
This product is made in China To Geemarc Telecom
UGAMPLIDECTCOMBI295_En_A3_V1.7
5678
In sub-menu mode: Press and hold to go back to idle screen.
In editing / pre-dial mode: Press to delete a character/digit.
In editing / pre-dial mode: Press and hold to delete all the
characters / digits.
During a call: Press to mute/resume the microphone.
During ringing: Press to silence the handset ringer.
In idle mode: Press to intercom another handset.
28. TALK OFF ( )
During a call: Press to end a call and go back to idle screen In
menu/editing mode: Press to go back to previous menu.
In menu/editing mode: Press and hold to go back to idle screen.
In idle mode: Press and hold to power off the handset.
Press and hold to power on when it is off.
29. ALPHANUMERIC KEYPAD, STAR ( ), HASH ( )
In predial or editing mode: Press to insert a digit /character / /.
key in idle mode: Press and hold to enable or disable the
keypad lock.
key in idle mode: Press and hold to turn on/off the ringer.
0key in idle/pre-dial mode/number editing mode: Press
and hold to insert a pause.
30. R
During a call: Press to answer a new call if you subscribed to
Call Waiting service from your service provider.
31. PHONEBOOK ( )
In idle mode: Press to access the phonebook.
The phone settings are always set in the same manner:
Press Menu/OK button to open the main menu. Then
use the ▼▲buttons to select an entry and confirm it by
pressing the Menu/OK button.
The factory preset PIN code is 0000
Example:
Set the language on the base
Press MENU / OK, then select ▼▲language, press
MENU / OK , then select ▼▲desired language and then
press MENU / OK to confirm.
Set the language on the handset
Press MENU / OK , then select ▼▲HS settings, press
MENU / OK , then select ▼▲language, press MENU /
OK , than select ▼▲desired language and then press
MENU / OK to confirm.
MENU SETTING
Base
PHONEBOOK
►VIEW►ADD►EDIT►DELETE►DELETE ALL►PB STATUS
CALL LOG : ►MISSED ►RECEIVED ►DIALLED
DATE & TIME : ►TIME FORMAT ►SET CLOCK
LANGUAGE
►ENGLISH ►DEUTSCH ►FRANÇAIS ►ITALIANO
►NEDERLANDS…
SETTINGS
►RING SETUP ►DELETE HS ►DIAL MODE ►FLASH TIME
►KEY TONE ►CHANGE PIN ►BS DEFAULT
PAGE ALL HS
REGISTRATION
ANS. MACHINE
►MSG PLAYBACK ►DELETE ALL ►MEMO ►TAM ON/OFF
►TAM SETTINGS (ANSWER MODE, OGM SETTINGS,
ANSWER DELAY, RECORD TIME, TAM LANGUAGE, BS
SCREENING, REMOTE ACC, COMPRESSION, CHANGE PIN,
TAM DEFAULT)
Handset
PHONEBOOK
►VIEW LIST
under an entry: ►ADD ►VIEW ►EDIT ►DELETE
►DELETE ALL ►PB STATUS ►FASTDIAL
CALL LIST
►VIEW LIST
under an entry: ►ADD TO PB ►DELETE ►DELETE ALL
►DETAILS ►CATEGORY
BS SETTINGS
►BS RINGER ►RING VOLUME ►DELETEHS
►DIAL MODE ►FLASH TIME►CHANGE PIN
HS SETTINGS
►RING SETUP►TONE SETUP►SELECT BASE
►LANGUAGE ►RENAME HS ►HS DISPLAY ►AUTO
ANSWER
DIRECT MEM : ►M1-M2-M3-M4
DATE & TIME
►DATE FORMAT ►TIME FORMAT ►SET TIME ►SET DATE
ALARM : ►ON ►OFF
REGISTRATION : ►BASE 1, 2, 3 or 4
DEFAULT : ►PIN? ----
ANS. MACHINE
►MSG PLAYBACK ►DELETE ALL ►MEMO ►TAM ON/OFF
►TAM SETTINGS (ANSWER MODE, TAM LANGUAGE,
OGM SETTINGS, ANSWER DELAY, RECORD TIME,
COMPRESSION, BS SCREENING,REMOTE ACC,
CHANGE PIN)
REGISTRATION & DE-REGISTRATION
Note: Handset and base station are pre-registered.
Up to 4 handsets can be registered to a single base station.
In the case of re-registration, the PIN code is 0000.
Registration a handset
On Handset:Press MENU/OK select▼▲ REGISTRATION,
Press MENU/OK select ▼▲BASE(1-4), Press MENU/OK
enter PIN.
At the same time on Base: Press MENU/OK , select ▼▲
REGISTRATION, press MENU/OK to see PLEASE WAIT
(If the registration is successful, there will be a confirmation beep).
De-Registration
On Base: Press MENU/OK , select ▼▲SETTINGS,
press MENU/OK
select ▼▲DELETE HS, press MENU/OK enter PIN,
press MENU/OK
select ▼▲one of the handsets that you want to de-register,
press MENU/ OK to confirm.
INTERCOM
Internal Call
Base: Press INT/ /CLEAR ( ), select ▼▲HS 1 -
5, press MENU /OK to connect.
Handset: Press C/MUTE , Enter the desired handset
number on keypad.
Base is "7"
Call All Handsets
Base: Press INT/ /CLEAR ( ), select ▼▲ALL
HANDSETS, press MENU /OK to connect.
Handset: Press C / MUTE , Enter "9" on keypad.
Transfer an External Call
Base: Press MENU /OK , select ▼▲handset number, press
or on handset. After connection quit the call on base.
Handset: Press MENU / OK , select ▼▲INTERCOM,
Press MENU / OK ,
Enter the desired handset number on keypad. After connection
quit the call on handset.
Conference Call
Handset: Press MENU / OK , select ▼▲INTERCOM,
Press MENU / OK ,
Enter the desired handset number on keypad.
After connection press and hold until CONFERENCE is
shown.
Your telephone base includes a telephone answering machine
that records unanswered calls when it is on. The answering
machine can store up to 59 messages within the maximum
recording time of approximately 15 minutes. As well as recording
incoming messages, you can record memos for other users of
your phone.
Press ANS ON/OFF to switch the answering machine
ON or OFF
REMOTE OPERATIONS
If you are away from your home, you can call your answering
machine to switch on or off the answering machine and listen
to your messages remotely using another tone-dialing phone.
1. Place a call from a tone-dialing phone.
2. When the answering machine answers the call and starts
playing OGM, press .
3. Enter the 4-digit Remote Access PIN (default PIN is 0000).
4. Press the following keys to carry out your desired function.
AFunctions
While message is not playing While message is playing
2Delete the current message playbac
k
4
Repeat playing the current message
from the beginning. Press twice to
skip backward to the previous
messa
g
e.
5Play the message
6Skip forward to play the next message
7Turn on the answering machine
8Stop the current message playbac
k
9Turn off the answering machine
*Enter the 4-digit remote access
PIN
NOTE:
When your answering machine memory is full and the
answer mode is in ANS & RECORD, the answer mode will
change to ANSWER ONLY automatically.
It will change to ANS & RECORD mode automatically after
some messages have been deleted.
You cannot delete new messages before they were listened.
MAINTENANCE
Clean the surface of the housing with a soft, fluff-free cloth.
Do not use any cleaning agents or solvents.
GUARANTEE
From the moment your Geemarc AMPLIDECT COMBI 295 is
purchased, Geemarc guarantee it for the period of two years.
During this time, all repairs or replacements (at our discretion)
are free of charge. Should you experience a problem then
contact our help line or visit our website at www.geemarc.com.
The guarantee does not cover accidents, negligence or
breakages to any parts. The product must not be tampered
with or taken apart by anyone who is not an authorized
Geemarc representative.
The Geemarc guarantee in no way limits your legal rights.
IMPORTANT: YOUR RECEIPT IS PART OF YOUR
GUARANTEE AND MUST BE RETAINED AND PRODUCED
IN THE EVENT OF A WARRANTY CLAIM.
Please note: The guarantee applies to the United Kingdom only.
DECLARATIONS:
UKCA Directives
Geemarc Telecom SA hereby declares that this AMPLIDECT
COMBI 295 is in compliance with the essential requirements
and other relevant provisions of the Radio Equipment Directive
2014/53/UE.
The UKCA declaration of conformity may be consulted at
www.geemarc.com
RF powe
r
< 250mW
Power Supply
Base and Charge
r
Input 100-240V 50/60Hz;
Output DC6V 0.45A, 2.7W adapte
r
Cordless Handset 2.4V, 500mAH rechargeable NiMh battery pack
Electrical connection: The apparatus is designed to operate
from a 230V 50Hz supply only. (Classified as hazardous
voltage according to EN62368-1 standard). The apparatus
does not incorporate an integral power on/off switch. To switch
off the apparatus, disconnect the power adaptor.
When installing the apparatus, ensure that the mains power
socket is readily accessible.
Telephone connection:
Voltages present on the telecommunication network are
classified TNV-3 (Telecommunication Network Voltage)
according to the EN62368-1 standard.
Recycling Directives
The WEEE (Waste Electrical and Electronic Equipment) has
been put in place for the products at the end of their useful
life are recycled in the best way.
When this product is finished with, please do not put it in your
domestic waste bin. Please use one of the following disposal
options:
- Remove the batteries and deposit them in an appropriate
WEEE skip.
Deposit the product in an appropriate WEEE skip.
- Or, hand the old product to the retailer. If you purchase a
new one, they should accept it.
Thus if you respect these instructions you ensure human
health and environmental protection.
For product support and help visit our website at
www.geemarc.com
E-mail : help@geemarc.com
telephone 01707 387602
lines are open 09h00 to 16h00 Mon to Fri
Parc de l’Etoile, 2 Rue Galilée, 59760 Grande-Synthe,France.
Manufacturer: Vtech (Dongguan) Telecommunications Limited.
Vtech Science Park, Xia Ling Bei Management Zone, Liaobu, Dongguan,
Guangdong.
This product is made in China To Geemarc Telecom
UGAMPLIDECTCOMBI295_En_A3_V1.7
5678
In sub-menu mode: Press and hold to go back to idle screen.
In editing / pre-dial mode: Press to delete a character/digit.
In editing / pre-dial mode: Press and hold to delete all the
characters / digits.
During a call: Press to mute/resume the microphone.
During ringing: Press to silence the handset ringer.
In idle mode: Press to intercom another handset.
28. TALK OFF ( )
During a call: Press to end a call and go back to idle screen In
menu/editing mode: Press to go back to previous menu.
In menu/editing mode: Press and hold to go back to idle screen.
In idle mode: Press and hold to power off the handset.
Press and hold to power on when it is off.
29. ALPHANUMERIC KEYPAD, STAR ( ), HASH ( )
In predial or editing mode: Press to insert a digit /character / /.
key in idle mode: Press and hold to enable or disable the
keypad lock.
key in idle mode: Press and hold to turn on/off the ringer.
0key in idle/pre-dial mode/number editing mode: Press
and hold to insert a pause.
30. R
During a call: Press to answer a new call if you subscribed to
Call Waiting service from your service provider.
31. PHONEBOOK ( )
In idle mode: Press to access the phonebook.
The phone settings are always set in the same manner:
Press Menu/OK button to open the main menu. Then
use the ▼▲buttons to select an entry and confirm it by
pressing the Menu/OK button.
The factory preset PIN code is 0000
Example:
Set the language on the base
Press MENU / OK, then select ▼▲language, press
MENU / OK , then select ▼▲desired language and then
press MENU / OK to confirm.
Set the language on the handset
Press MENU / OK , then select ▼▲HS settings, press
MENU / OK , then select ▼▲language, press MENU /
OK , than select ▼▲desired language and then press
MENU / OK to confirm.
MENU SETTING
Base
PHONEBOOK
►VIEW►ADD►EDIT►DELETE►DELETE ALL►PB STATUS
CALL LOG : ►MISSED ►RECEIVED ►DIALLED
DATE & TIME : ►TIME FORMAT ►SET CLOCK
LANGUAGE
►ENGLISH ►DEUTSCH ►FRANÇAIS ►ITALIANO
►NEDERLANDS…
SETTINGS
►RING SETUP ►DELETE HS ►DIAL MODE ►FLASH TIME
►KEY TONE ►CHANGE PIN ►BS DEFAULT
PAGE ALL HS
REGISTRATION
ANS. MACHINE
►MSG PLAYBACK ►DELETE ALL ►MEMO ►TAM ON/OFF
►TAM SETTINGS (ANSWER MODE, OGM SETTINGS,
ANSWER DELAY, RECORD TIME, TAM LANGUAGE, BS
SCREENING, REMOTE ACC, COMPRESSION, CHANGE PIN,
TAM DEFAULT)
Handset
PHONEBOOK
►VIEW LIST
under an entry: ►ADD ►VIEW ►EDIT ►DELETE
►DELETE ALL ►PB STATUS ►FASTDIAL
CALL LIST
►VIEW LIST
under an entry: ►ADD TO PB ►DELETE ►DELETE ALL
►DETAILS ►CATEGORY
BS SETTINGS
►BS RINGER ►RING VOLUME ►DELETEHS
►DIAL MODE ►FLASH TIME►CHANGE PIN
HS SETTINGS
►RING SETUP►TONE SETUP►SELECT BASE
►LANGUAGE ►RENAME HS ►HS DISPLAY ►AUTO
ANSWER
DIRECT MEM : ►M1-M2-M3-M4
DATE & TIME
►DATE FORMAT ►TIME FORMAT ►SET TIME ►SET DATE
ALARM : ►ON ►OFF
REGISTRATION : ►BASE 1, 2, 3 or 4
DEFAULT : ►PIN? ----
ANS. MACHINE
►MSG PLAYBACK ►DELETE ALL ►MEMO ►TAM ON/OFF
►TAM SETTINGS (ANSWER MODE, TAM LANGUAGE,
OGM SETTINGS, ANSWER DELAY, RECORD TIME,
COMPRESSION, BS SCREENING,REMOTE ACC,
CHANGE PIN)
REGISTRATION & DE-REGISTRATION
Note: Handset and base station are pre-registered.
Up to 4 handsets can be registered to a single base station.
In the case of re-registration, the PIN code is 0000.
Registration a handset
On Handset:Press MENU/OK select▼▲ REGISTRATION,
Press MENU/OK select ▼▲BASE(1-4), Press MENU/OK
enter PIN.
At the same time on Base: Press MENU/OK , select ▼▲
REGISTRATION, press MENU/OK to see PLEASE WAIT
(If the registration is successful, there will be a confirmation beep).
De-Registration
On Base: Press MENU/OK , select ▼▲SETTINGS,
press MENU/OK
select ▼▲DELETE HS, press MENU/OK enter PIN,
press MENU/OK
select ▼▲one of the handsets that you want to de-register,
press MENU/ OK to confirm.
INTERCOM
Internal Call
Base: Press INT/ /CLEAR ( ), select ▼▲HS 1 -
5, press MENU /OK to connect.
Handset: Press C/MUTE , Enter the desired handset
number on keypad.
Base is "7"
Call All Handsets
Base: Press INT/ /CLEAR ( ), select ▼▲ALL
HANDSETS, press MENU /OK to connect.
Handset: Press C / MUTE , Enter "9" on keypad.
Transfer an External Call
Base: Press MENU /OK , select ▼▲handset number, press
or on handset. After connection quit the call on base.
Handset: Press MENU / OK , select ▼▲INTERCOM,
Press MENU / OK ,
Enter the desired handset number on keypad. After connection
quit the call on handset.
Conference Call
Handset: Press MENU / OK , select ▼▲INTERCOM,
Press MENU / OK ,
Enter the desired handset number on keypad.
After connection press and hold until CONFERENCE is
shown.
Your telephone base includes a telephone answering machine
that records unanswered calls when it is on. The answering
machine can store up to 59 messages within the maximum
recording time of approximately 15 minutes. As well as recording
incoming messages, you can record memos for other users of
your phone.
Press ANS ON/OFF to switch the answering machine
ON or OFF
REMOTE OPERATIONS
If you are away from your home, you can call your answering
machine to switch on or off the answering machine and listen
to your messages remotely using another tone-dialing phone.
1. Place a call from a tone-dialing phone.
2. When the answering machine answers the call and starts
playing OGM, press .
3. Enter the 4-digit Remote Access PIN (default PIN is 0000).
4. Press the following keys to carry out your desired function.
AFunctions
While message is not playing While message is playing
2Delete the current message playbac
k
4
Repeat playing the current message
from the beginning. Press twice to
skip backward to the previous
messa
g
e.
5Play the message
6Skip forward to play the next message
7Turn on the answering machine
8Stop the current message playbac
k
9Turn off the answering machine
*Enter the 4-digit remote access
PIN
NOTE:
When your answering machine memory is full and the
answer mode is in ANS & RECORD, the answer mode will
change to ANSWER ONLY automatically.
It will change to ANS & RECORD mode automatically after
some messages have been deleted.
You cannot delete new messages before they were listened.
MAINTENANCE
Clean the surface of the housing with a soft, fluff-free cloth.
Do not use any cleaning agents or solvents.
GUARANTEE
From the moment your Geemarc AMPLIDECT COMBI 295 is
purchased, Geemarc guarantee it for the period of two years.
During this time, all repairs or replacements (at our discretion)
are free of charge. Should you experience a problem then
contact our help line or visit our website at www.geemarc.com.
The guarantee does not cover accidents, negligence or
breakages to any parts. The product must not be tampered
with or taken apart by anyone who is not an authorized
Geemarc representative.
The Geemarc guarantee in no way limits your legal rights.
IMPORTANT: YOUR RECEIPT IS PART OF YOUR
GUARANTEE AND MUST BE RETAINED AND PRODUCED
IN THE EVENT OF A WARRANTY CLAIM.
Please note: The guarantee applies to the United Kingdom only.
DECLARATIONS:
UKCA Directives
Geemarc Telecom SA hereby declares that this AMPLIDECT
COMBI 295 is in compliance with the essential requirements
and other relevant provisions of the Radio Equipment Directive
2014/53/UE.
The UKCA declaration of conformity may be consulted at
www.geemarc.com
RF powe
r
< 250mW
Power Supply
Base and Charge
r
Input 100-240V 50/60Hz;
Output DC6V 0.45A, 2.7W adapte
r
Cordless Handset 2.4V, 500mAH rechargeable NiMh battery pack
Electrical connection: The apparatus is designed to operate
from a 230V 50Hz supply only. (Classified as hazardous
voltage according to EN62368-1 standard). The apparatus
does not incorporate an integral power on/off switch. To switch
off the apparatus, disconnect the power adaptor.
When installing the apparatus, ensure that the mains power
socket is readily accessible.
Telephone connection:
Voltages present on the telecommunication network are
classified TNV-3 (Telecommunication Network Voltage)
according to the EN62368-1 standard.
Recycling Directives
The WEEE (Waste Electrical and Electronic Equipment) has
been put in place for the products at the end of their useful
life are recycled in the best way.
When this product is finished with, please do not put it in your
domestic waste bin. Please use one of the following disposal
options:
- Remove the batteries and deposit them in an appropriate
WEEE skip.
Deposit the product in an appropriate WEEE skip.
- Or, hand the old product to the retailer. If you purchase a
new one, they should accept it.
Thus if you respect these instructions you ensure human
health and environmental protection.
For product support and help visit our website at
www.geemarc.com
telephone 01707 387602
lines are open 09h00 to 16h00 Mon to Fri
Parc de l’Etoile, 2 Rue Galilée, 59760 Grande-Synthe,France.
Manufacturer: Vtech (Dongguan) Telecommunications Limited.
Vtech Science Park, Xia Ling Bei Management Zone, Liaobu, Dongguan,
Guangdong.
This product is made in China To Geemarc Telecom
UGAMPLIDECTCOMBI295_En_A3_V1.7
Other manuals for Amplidect Combi 295
1
Table of contents
Other Geemarc Telephone manuals
Geemarc
Geemarc Jupiter 10 User manual
Geemarc
Geemarc CL1400 User manual
Geemarc
Geemarc Ampli550 User manual
Geemarc
Geemarc Ampli DECT150 User manual
Geemarc
Geemarc AMPLI600 User manual
Geemarc
Geemarc CL400 User manual
Geemarc
Geemarc Madrid User manual
Geemarc
Geemarc ClearSound Amplidect COMBI355 User manual
Geemarc
Geemarc Clearsound CL600 User manual
Geemarc
Geemarc CL555 User manual
Geemarc
Geemarc AmpliPOWER 40 User manual
Geemarc
Geemarc CL595 User manual
Geemarc
Geemarc combi dect 295 User manual
Geemarc
Geemarc AMPLIDECT COMBI 595 User manual
Geemarc
Geemarc PhotoPhone User manual
Geemarc
Geemarc Ampli455 User manual
Geemarc
Geemarc CL1100 User manual
Geemarc
Geemarc AmpliDECT250 User manual
Geemarc
Geemarc Solar 4 CID User manual
Geemarc
Geemarc AMPLIDECT 280 User manual
