Geemarc AmpliPOWER 40 User manual

AmpliPOWER 40/50
English
Français
Deutsch
!!!Warning,AmpliPOWER40/50hasanextraloudreceiving
volume gain!!! (Risk of acoustic shock)
!!!Attention,l’AmpliPOWER40/50possèdeunamplifiacteur
de volume très puissant!!! (Risque de choc accoustique)
!!!SeienSievorsichtig:derAmpliPOWER40/50hateinsehr
starke Lautstärke!!! (Akustisches Schockrisiko)
Page
Page 2
Page 3
3
2
4

2
!!!User manual to read carefully before start to
use!!!
!!!Manueld’utilisationàlireimpérativementavant
la mise en service!!!
!!!BevorIhrneuesTelefongerätzubenutzen,
bittelesenSiediesBenutzerhandbuch sehr
sorgfältig!!!
CAUTION: thistelephoneisspecificallydesignedforthepeoplewithhearing
difficultiesandisprovidedwithahandsetearpiecevolumecontrolforindividual
requirements. Due care must be taken by all users that the handset earpiece
volume control is set to the lowest level acceptable by each respective user.
Careshouldthereforebe exercised toensurethatanynaive users arefamiliar
withthisrequirement.
ATTENTION: Ce téléphone peut être destiné aux personnes ayant des
problèmes auditifs. il possède un écouteur a volume variable. A la première
utilisation,assurezvousquelevolume soit réglé auminimum.Lespersonnes
malentendantespourrontparlasuite augmenterlevolumepourl’adapter àleur
besoin.
WARNUNG:DiesesTelefonwurdespeziellfürschwerhörigePersonen
konzipiertundbesitzteine aufdieindividuellenBedürfnisse einstellbare
Hörerlautstärke.InFolgedessensollten alle Nutzerdaraufachten,dassder
LautstärkereglerdesHörers,inRücksichtauf andere Nutzer, auf das
niedrigste Niveau gestellt wird. Es ist darauf zu achten, dass unwissende
Benutzermitder HandhabungdieserApparaturvertrautgemacht werden.

-RingandflashLED
3
2-Alarmand ring options 8
1 - Connecting the telephone 8
9- Volume and tone receiving 13
7 - Wall mounting 11
6 - Hotel message waiting switch 10
Index
INDEX
Description 5-7
Setting up
-Ringonly
-Ringandshaker
3 - Ringer settings 9
4 - Tone/Pulse switch (T/P) 10
5 - Time break recall switch (270/100) 10
Using the phone
8-Answeringincomingcalls 12
-Without headset
-With headset (option)
-Inhandsfreemode

10 - Making a call 15
4
- Without headset
- With headset (option)
-Inhandsfreemode
11 - Last number redial 16
12 - Recall, * & # buttons 16
13 - Mute button 17
14-Storingtelephonenumbers 17
15-Diallingstorednumbers 18
Options:
16 - Direct Vibe handset 19
17 - Shaker 20
18 - Headset with microphone 20
Guarantee 21
For product support and help visit our
websiteatwww.geemarc.com
telephone [phone]
or fax [phone]
Index

5
IndexDescription
Receptiontone
adjustment
Lastnumberredial Memorystoring Mute
Flashingincomingring indicator
Direct memories
3emergency
numbers Receptionvolume
adjustment
Timebreak recall
Extravolumeand
toneadjustment
Handset cord socket
Clipfor wall
mounting
Redlightoftone/
volumeactivation
Speakervolume
adjustement
Handsfree/
Headsetbutton

Description
Battery
compartment
Timebreak
recall
Dialling mode
Pulse/Tone
Handset
cord socket
Memo card
Holesforwall
mounting
6

Description
7
RingHi/Low/
OFFSwitch
Ringalarm
setting
Volumeandtone
adjustmentON/OFFswitch
Line socket
Hotelswitch
message
Shakersocket
Headsetsocket Adaptator
socket

8
1- Connecting the telephone
- Connect the handset cord.
- Open the battery door by unscrewing the
retaining screw. Insert 4 xAAAalkaline batteries
(notincluded).
Snap the battery door in place.
In case of power failure, batteries are required
for the ring.
- Connect the line cord.
- Connect the shaker cord (optional).
- Connect the headset cord (optional).
- Connect the PTT plug to the wall socket.
- Connect the 12V DC adaptor cord to the
telephone.
- Connect the 12V DC adaptor to your
wall socket (**).
(**) Classified “hazardous voltage” according to EN60950 standard.
2- Alarm and ringer volume setting
A 3 position switch located on the right side
of the phone allows the settings below:
Settingup

: Ringer and flash LED are activated.
9
(*) Classified TNV-3 according to EN60950 standard.
- : Ringer and shaker are activated.
-
3- Ringer settings
A switch located on right side allows the ringer to
be switched HI,LOW,OFF:
: Off, : Low, : Hi
Your phone comes with the ringer switched to
«High» and the melody set to «6».
Low Mid High
Melody 1 1 2 3
Melody 2 4 5 6(by default)
Melody 3 7 8 9
Ifyoudon’tliketheringermelody,youcanchoose
a new one by changing the settings as follow:
- Lift the handset.
- Press button.
- Press # button.
- Press any button 1 to 9.
Ringer will be activated on next call.
Settingup
- 0 : Only the ringer is activated.

you receive a message, the red light is
10
4- Tone/Pulse switch (T/P)
The Tone/Pulse switch is factory pre-set to
Tone position (T). In the UK,all telephone
exchangesnowuseTone dialling.Ifyourphone
does not dial out, it is probably being used from
an older private switch- board (PBX). In this
case,theTone/Pulse switch must be moved to
Pulse.
5- Time break recall switch (270/100)
For the UK, the TBR switch is factory pre-set to
100ms. It can be switched to 270ms for other
locations or PBX’s.
6- Hotel message waiting switch
Theseareusedwiththenewservicesprovidedon
hotel network. A switch located behind your
phoneallowstosetONthehotelmessagewaiting
function.Whentheswitch is settingON andwhen
Settingup