Geemarc Dallas 30 User manual

DALLAS 30
MULTIFUNCTION TELEPHONE

CONTENTS 1
INTRODUCTION 3
Unpacking the Telephone 4
DESCRIPTION 5
General Description 5
LCD Display Description 7
INSTALLATION 8
Setting Up 8
Wall Mounting 9
SETTINGS 10
Language Setting 10
Local Area Code Setting 11
PBX Dial Prefix Setting 12
Time Setting 13
Time Break Recall Setting 14
Screen Contrast Setting 15
Tone/Pulse Setting 16
Ringer Volume Setting 16
USING THE TELEPHONE 17
Making a Call 17
Receiving a Call 18
Last Number Redial 18
Recalling Recent Numbers 19
Music On Hold 19
Message Waiting Function 20
Call Timer 20
Battery Low 20
Send Level Volume Adjustment 20
Receive Level Volume Adjustment 20
CALLER DISPLAY 21
Call Counter 22
View Caller Display List 23
Dial a Number from the Caller Display List 23
Delete an Entry from the Caller Display List 24
Delete all Entries from the Caller Display List 24
PHONEBOOK 25
Create a Phonebook Entry 25
Copy an Entry from the Caller Display List to Phonebook 27
Copy an Entry from the Recent Numbers Dialled to Phonebook 27
View Phonebook Entries 28
Dialling using a Phonebook Entry 28
Modify a Phonebook Entry 29
Delete a Phonebook Entry 29
MEMORY 30
Storing a Number in One-Touch Memory 30
View One-Touch Memory Entries 30
Dialling a Number in One-Touch Memory 31
Editing a Number in One-Touch Memory 31
TROUBLESHOOTING 32
SAFETY INFORMATION 33
GUARANTEE 34
RECYCLING DIRECTIVES 36
CONTENTS
CONTENTS
1
2

Congratulations on purchasing your Geemarc Dallas 30 telephone. This is
a multifunction telephone which offers features such as hands free use,
phonebook and caller display*. It also has the added benefits of send and
receive amplification and a hearing aid compatible receiver.
Its is important that you read the instructions below in order to use your
Geemarc telephone to its full potential. Keep this user guide in a safe
place for future reference.
This guide explains how to use the following telephone:
Dallas 30
*To use the caller display facility, you must subscribe to your network provider’s caller display
service.
Unpacking the Telephone
When unpacking the telephone, you should find the following in the box:
1 Dallas30 unit
1 Dallas 30 handset with curly cord
1Telephone line cord
1 User Guide
For product support and help visit our website at www.geemarc.com
Telephone [phone]
Or fax [phone]
INTRODUCTION
INTRODUCTION
3
4

General Description
DESCRIPTION
DESCRIPTION
5
6

LCD Display Description
Standby Display
This LCD display shows the total number of calls and the number of new
calls ready to be reviewed. In this example you have a total of 4 calls
which includes two new calls. The date and time are also displayed.
Caller Display Record *
This LCD display shows the information received and stored when you
receive an incoming call.
Setting Up
Connect the handset. The connector at the end of the curly cord plugs
into the socket on the left hand side of the Dallas 30 unit.
Open the battery compartment. Insert 3 good quality alkaline batteries
(AAA size, 1.5V type, not supplied) into the battery compartment located
on the base of the telephone. Replace the battery cover. If the batteries
are running low, the battery icon will be displayed on the LCD display.
Always ensure that the DALLAS 30 is not connected to the telephone line
and the AC Mains Adaptor (if in use) when installing or changing batteries.
Note : Do not use rechargeable batteries. Do not put batteries into the
household rubbish, pay attention to battery regulations regarding battery
disposal.
Connect the line cord to the socket located at rear of telephone then
connect the plug into the wall socket *.
There is an optionally available Geemarc AC adaptor. This can be used to
prolong the life of the batteries (or replace the need to use any batteries).
This adaptor must have a 9V DC output with a positive polarity centre pin.
Connect the power supply to the socket located at rear of the telephone
then plug into a 13amp wall socket. Please choose a socket near your
telephone socket to enable you to unplug the mains power quickly in case
of a problem.
(*) Classified “hazardous voltage” according to EN60950 standard
(**) Classified TNV-3 according to EN60950 standard.
INSTALLATION
5
7
Note:
Battery or mains power are required to power the Phonebook
and Caller Display functions of the telephone. Without battery or mains
power, the telephone can still be used to answer calls or to manually
dial out calls but all stored numbers will be lost.
Caller’s Number and Name
12:00 AM
1/01
-002- -004-
NEW TOTAL
NEW
11:23 AM
7/03
Call 03
01517222277
ROBERT JONES
Time and Date of the Call
New Call
Record Number
8
DESCRIPTION

Wall Mounting
Make 2 holes in the wall, 83mm apart (use the wall mount template), insert
the wall plugs and the wall mounting screws. The screws should protrude
from the wall by 6-7 mm. Place the phone onto the screw-heads and slide
down to secure.
Handset clip
To ensure that the handset stays firmly in position when the telephone is
wall mounted, turn the handset clip clockwise through 180o.
If you do not wall mount the Dallas 30, it is recommended that the
telephone is placed on a tablecloth or similar as rubber feet can mark
some surfaces.
When using Setting functions, a pause of 5 seconds or more between
pressing buttons results in the telephone returning to standby and any
changes to settings will not be saved.
Language Setting
You can choose between 11 different languages including English and
French.
Press OK for 3 seconds
The telephone enters the Settings mode
‘OPTIONS MENU’
Use or to select ‘SET LANGUAGE’
Press OK to enter the language menu. The current language used
will be displayed on the LCD display
Use or to select language
Press OK to confirm
Wait 5 seconds and the telephone will return to standby
SETTINGS
10
13
INSTALLATION
9
Wall Mounting
Template 83mm

Local Area Code Code Setting
In order for Callback to function correctly, the local area code should be
set.
Press OK for 3 seconds
The telephone enters the Settings mode
‘OPTIONS MENU’
Use or to select ‘LOCAL AREA CODE’.
Press OK to enter the local area code menu. Five blank spaces or
the current local area code setting will be displayed. The first
space/digit will flash.
Use orto select the correct digit. Press OK to move from one
space to another
Press OK to confirm
Wait 5 seconds and the telephone will return to standby
Note: To leave area code blank/unchanged, simply press OK 5 times or
wait 5 seconds and the telephone will return to standby
PBX Dial Prefix Setting
This setting is not required if you are not using the Dallas 30 with a PBX.
Some telephone systems require an access code before dialling the
telephone number e.g. 9. The telephone can be set to automatically insert
a one digit access code and a preset pause when you use a telephone
number from the Caller Display list or memory.
Press OK for 3 seconds
The telephone enters the Settings mode
‘OPTIONS MENU’
Use or to select ‘PBX DIAL PREFIX’.
Press OK to enter the PBX dial prefix menu. Three blank spaces or
the current prefix will be displayed. The first space/digit will flash.
Use or to select the correct digit. Press OK to move from
one space to another
Press OK to confirm
Wait 5 seconds and the telephone will return to standby
Note: If the PBX requires a few seconds pause before getting the dial
tone, use or to select a pause (shown as ‘P’) followed by OK.
A 3 second pause will be inserted after the prefix has been dialled. If the
PBX requires an even longer pause, then you may insert one more pause
in the third space by repeating the procedure above.
Note: To leave prefix blank/unchanged, simply press OK 3 times or wait
5 seconds and the telephone will return to standby
SETTINGS
12
SETTINGS
11

Time Setting
If you subscribe to a Caller Display service, the date and time will be set
whenever you receive a call. However, if you do not subscribe to this
service, you will need to set the date and time manually.
Press OK for 3 seconds
The telephone enters the Settings mode
‘OPTIONS MENU’
Use or to select ‘SET TIME/DATE’
Press OK
The HOUR digit will flash. Use or to select the correct hour
Press OK to confirm
The MINUTE digits will flash. Use or to select the correct
minute
Press OK to confirm
The MONTH digit will flash. Use or to select the correct
month
Press OK to confirm
The DAY digit will flash. Use or to select the correct day
Press OK to confirm
Wait 5 seconds and the telephone will return to standby
Time Break Recall Setting ‘
Your telephone works with a time break recall for United Kingdom
(R=100ms)
Press OK for 3 seconds
The telephone enters the Settings mode
‘OPTIONS MENU’
Use orto select ‘SET FLASH TIME’
Press OK
Use or to select the correct flash setting (R= 100ms for UK)
Press OK to confirm
Wait 5 seconds and the telephone will return to standby
13
14
SETTINGS
SETTINGS

Screen Contrast Settings
There are 6 levels of LCD contrast available. This will alter the contrast
between the text on screen against the backlighting.
Press OK for 3 seconds
The telephone enters the Settings mode
‘OPTIONS MENU’
Use or to select ‘LCD CONTRAST’
Press OK
Use or to select the required contrast setting (1-6)
Press OK to confirm
Wait 5 seconds and the telephone will return to standby
Tone/Pulse Setting
In the UK, all telephone exchanges now use Tone dialling. The Tone/Pulse
setting is pre-set to Tone on your telephone.
If your phone does not dial out, it is probably being used from an older
private switchboard (PBX). In this case, the Tone/Pulse setting must be
changed to Pulse.
Press OK for 3 seconds
The telephone enters the Settings mode
‘OPTIONS MENU’
Use or to select ‘SET TONE/PULSE’
Press OK
Use or to select the required setting (Tone or Pulse)
Press OK to confirm
Wait 5 seconds and the telephone will return to standby
Ringer Volume Setting
The switch located on the right side of the Dallas 30 unit allows the
ringer to be switched to LOW, HIGH or OFF.
16
15
SETTINGS
SETTINGS

If you are using this telephone with a hearing aid, please set your hearing
aid to the <<T>> position
Making a Call
Pick up handset.
When you hear dialing tone, dial the number on the keypad. The
number will be displayed in the middle of the LCD display. The X
button can be used to correct an incorrect entry. The maximum
number of digits that can be dialled out is 32
To end the call simply replace the handset in the cradle
Making a Call – Hands Free
Dial the number on the keypad in the on-hook position. The X
button can be used to correct an incorrect entry
Press and the number will be dialled automatically
When the third party answers the call, you may speak with the
telephone in the hands free mode ( handset in the cradle)
To end the call press 
Note: To deactivate the Hands Free function during a call, lift the handset.
To activate the Hands Free function during the call, press and hold and
replace the handset on the cradle at the same time.
Receiving a Call
When an incoming call is received the telephone rings and the ringer LED
indicator will flash. If the caller can be identified (due to subscription to a
Caller Display service), the caller’s telephone number and name (provided
that the number and name stored are in the phonebook) will be displayed.
The total calls counter increases by 1. If the telephone call is not
answered the new call counter increases by 1 and the new call LED starts
flashing.
Lift the handset and speak
To end the call simply replace the handset in the cradle
Receiving a call – Hands Free
Press to speak hands free
To end the call press 
Last Number Redial
Lift the handset or press for hands free use
Press /P to redial the last number dialled
USING THE TELEPHONE
USING THE TELEPHONE
17
18
17