Generac Portable Products 2100PSI User manual

GEN RAC°I
Portable Products
2 IOOPSI
Owner's Manual/Manual del Propietario
Generac Portable Products isa licensed trademark of Briggs& Stratton Power Products.
Generac Portable Products es una marca registrada llcenciada de Briggs& Stratton Power Products.
Questions? Help is just amoment away!
Preguntas? La ayuda es justa un momento lejos!
Call: Generac Pressure Washer Helpline
Llame:Linea Directa del Lavador a Presi6n de Generac -1-800-270-1408 M-F 8-5 CT
Web: www.generac-por tables.corn
Model No. 1974-0 (2100 PSIPressureWasher)Manual No. 193729GS Revision0 (09/17/2003)I!!!!!!l!l!!l!
O8

Generac Portable Products 2100 PSI PressureWasher
TABLE OF CONTENTS
SafetyRules.................................... 2-4
KnowYour PressureWasher ........................ 5
Assembly ...................................... 6-7
Opera, on .................................... 8-10
Product Specific_Jons ............................ I I
Maintenance ................................. I I-13
Storage ........................................ 14
Troubleshooting ................................. 15
Replacement Par_s ............................ 16-17
Warranty ................................. last P_e
EQUIPMENT
DESCRIPTION
_Read this manual carefully and become familiar
with your pressure vrasher. Know its
applicadons, its limitations and any hazards
involved.
Every effort has been made to ensure _at fnforma_-Jon in
this manual Ts accurate and current, However, we reserve
the right to change, al_r or otherwise improve the product
and thisdocument at any time wfthout priorno_ce.
!n _he S_e 0f c_iifum!a_spa#(_r_ster is_qU!_d bylaw
(SeC_i°n _42 0f_e C_lTf°mi_ Pub!!€ ReS0U_es Cede)i I
Ot_er S_tes m_ have Sfmflar I_S i Fede_l laws apply On
fed,_l I_nds I_yO_ e_ip _he m_me_ _idl _ _p,r k arres_r,
!tmUSt:be m_in_!_ed fn effect!ve w_c_r_rig
SAFETY RULES
j_IL Thls is the safeL_ alert symbol. It is used to
alert you to potential personal injury hazards.
Obey all safeL_ messages that follow this
symbol to avoid possible injury or death.
The safety alert symbol (_I,) is used with asignalword
(DANGER, CAUTION,WARNING), a pictorial and/or a
safety message to alert you to h_=z_rds,DANGER indicates
a hazard which, ff not avoided, w_ffresult fn death or serious
injury, WARNING fndfcates a h_z_rd which, if not avoided,
couldresult in deathor serious fniury. CAUTION
indicates a hazard which, ff not avoided, might result fn
minor or moderate injury. CAUTION, when used
without the aler_csymbol, indicates asituation that could
result in equipment damage. Follow safety messzses to
avoid or reduce the risk of fniury or de_th.
WARNING
The engine exhaust from this product €ontalns
chemicals known to the State of California to cause
cancer, birth defects, or other reproductive harm,
Hazard Symbols and Meanings
Toxic Fumes ElecCric&l Shock
SlipperySurface F_II Fluid In[ecCion
Fire Explos(on HoC Surface
rVlovingParts FlyingObjects Kickback
12

Generac Portable Produc_ 2100 PSIPressureW_sher
DANGER
,_ep Spraynozzle b_een 8 co 24 inchesawayfrom Cleaning
,Operate thi_,unit on _ stablesuriname
, The gleaning areashOUld haveadequateslopes _ncldrainage tO
_dOCOtheP_sib!l!__ af_ll
,Be _mely eareful ify0u mUStUSethepmsSU_ _her from
aladder,scaffoldingor any ocher relatively unstable location
, _f_!Yg_Psp_ gun_f_hb_hh_ _h_n_Sin_
WARN ING
WHEN ADDING FUEL
,Turn presSU_ _her OFF_ndIctic _! at !east2 minutes
bdo__m0v!n__ _p
' F(IIfuel_nk OUtdoOrsL
,DO NO! overfilltank_AI!0w sP_-Cefor
'_eP fuel aY_ayfro mspa_€ open/lames, pi!_ I!ghts¢h_ r. and
,DO NOT dp engine 0r eClUiprnen__.tangleWhich eaUsesfuel
, DO NOT Sprayflammabl_ liquids
WHEN TRANSPORTING OR REPAIRI NG EQU!PMEN'I"
' Transpordrepalrwithfueltank E'VlPTYOr with fuel shutoff
WHEN STORING FUEL OR EQUIPMENT W!TH FUEL
IN TANK
'StOreawayfrom fureaces,stoves_w_cerh_terS_ dothes
dryers 0r otherappl!ancesthat havepilot !(ght_or 0the_
ignition SOUrc_bet_.Us_thc_ycanignite fuel VapOrs
WARN ING
/3

Generac Portable Products 2100 PSI PressureWasher
CAUTION
CAUTION
,DO NO'r s_Um Sp_ gun !n open p_!cion.
,0o NOTlea,_S_raygU"U"_"d_d Wh!lem_h!,e
,NEVER USea sP_ gun which does not have a cr(_er lock or
, A!W_ys be certain spray gun, no_!es and _C_eSsories
CAUTION
CAUTION
,!i_yoU havequascions ab0uc intended u_ei ask d_!er or
c0n_ Biffs & Str_tton powe_ produc_.
,NEVER operate units _Ch broken Or missing p_rt_; or
_^dch_c prot_ve h0using0r covers.
,DO NOT by_ass _.nyS&fe_ deviceon this machine_
, Before _r_ing pressur_ w_-sher in co!d We_Jher. check a!l
par_ of _e equipment to be surc (co has not formed _h_re
,NEVER- move machine by pul!ing on high pressu_ hOSe.
handl_ prev(d_d on unit.
, Chccl¢fuelsystem for le_ksor SignsOf deteriorationL Such as
Chafed or sp0n_)" hos_i !o_e or missing clamps, 0r d_.m_ed
tank or cap. C0r reccal! d_eccs b_ore Operating PmSSU_
,'-his equipment (_ designed to be USedWith Bri_S & Strat:on
Power Productt. author!zeal p_rts ONLY, If equ!pmenl: it. used
_Ch P"r_s th_ DO N_ c0mP_ _i_h minimum spcc!fieati0ns
m_m
4

Generec Por_ble Produc_s2100 PSIPressureW_sher
KNOWYOUR PRESSURE WASH ER
Read (;his owner's manual and safeL-_frules before operating your pressure washer.
Compare the Tllus_retTonswith your pressure wr_sher to famTITr_rTzeyourself wTth the IocatTons of vr_riouscontrols r_nd
r_djustme_ts.Sr_vethTsmr_nualfor future reference.
High Pressure Hose
Air Cle_r_er .............
PrTmer Bulb
I........... High _ressure O_tlet .......
&W_er Inlet
Pump eq_!pped with
A_om_ti¢ Cool DOWn FuelTa_k
A!r C!eaner _Dry ?/pe fTIter elemen: limits the am0unt H!gh P_ssure Oudet _C_nnec:!0n _r high pressure
Of dirt _r_d d_JStthat gets in hos_i
Automatic C00! Down System _Cycles Data Tag {no€ shown, near rear _f base P!aCe)
_hrough pump When _er reaches 125%1_5_E Warm Pro¥ides model _nd serial n_mber of pressure _sher.
W_ter wili rJischar from ump onto have _hese readily zv_il_ble iF Czl]i_g for assis_cei
P
I
system Prevents nternal Pump damage, Primer Bulb Prepares a _oId engine for s_rtingi
Chemlcal Iniectlon Siphon/Filter _Use _o sipho_
p_SSu_ Rec0!! starter Used for S_ng the e_gine m_n_ally,
Spray Gun _Cor_trols the applic_Jo_ of water onto
Fue Tank _Fclea_|_g s_r_r_cewll:h tr_er devlce_ I_cl_des sr_tetylatch.
High PressUre Hose Connec_ 0r_e end :o w,'_ter
pump _cl the O_her e_d _sprey gUn, water !n!e_ €OnneC:!_n fo_ g_rd_n hose,
/5

Generac Portable Products 2100 PSI PressureWasher
ASSEMBLY
IMPORTANT: Read entire owner's manual before you
attempt to assemble or operate your new pressure washer.
Remove Pressure Washer From
Carton
I, Remove the parts bag, accessories, and inserts included
with pressure washer.
2, Slice t_vo corners at the end of c_rton from top to
botr;om so the panel can be folded down flat,
3, Remove pressure washer from carl;ore
Carton Contents
Items in the carton include:
Main Unit
Handle
High Pressure Hose
Spray Gun
Nozzle Extension
Safety Goggles
Oil Bottle
Parts Bag (which includes the following):
Owner's Manual
Engine Manual
Owner's Registration Card
Handle Attachment Hardware
PREPARING PRESSURE
WASHER FOR USE
If you have any problems with the assembly of your
pressure washer or if parts are missing or damaged, call the
pressure washer helplfne at 1-800-270-1408. If calling for
assistance, please have the model, revision, and serial
number from the data tag available.
To prepare your pressure washer for operation, you
will need to perform these tasks:
I. Fillout and send in registration card.
2. Attach handle to main unit.
3. Add oil to engine crankcase.
4. Add fuel to fuel tank.
5. Connect high pressure hose to spray gun and pump.
6, Connect water supply to pump,
7. Attach nozzle extension to spray gun.
Attach Handle
I. Place handle assembly onto handle supports connected
to main unit, Make sure holes in handle align with
holes on handle supports (Figure I).
Alig
Handle
Supports
NOTE: It may be necessary to move the handle supports
from side to side in order to align the handle so it will slide
over the handle supports.
2. Insert carriage bolts through holes from outside of
unit and aI;t'.acha plastic knob from inside of unit
(Figure 2).Tighten by hand.
5
.Insert one "L" hooks through hole just under billboard
on lefl;side of handle (viewing from rear of unit). Hold
hook fn place with pliers and attach Iocknut with
7/16" wrench (Figure 3),
;prayGun
Hook
4. Insert other"L" hook through hole iust above
billboard on right side of handle (viewing from rear of
unit). Hold hook fn place with pliers and at_ch Iocknut
with 7/16" wrench (Figure 3),
/6

Generac Portable Produc_s2100 PSIPressureWasher
Add Engine Oil and Fuel
•Place pressure washer on a level surface.
CAUTION
,Before connecting garden hose to wa:er inlet, fnspect
inlet screen (Ffgure 6), Cle_n screen ff i: cont_fns
debrTsor have Tt replaced if damaged. Refer to the
sectTon "O-Ring MaTetenance" Tfinlet screen Ts
damagud, DO NOT RUN PRESSLJREWASHER IF
INLET SCREEN IS DAMAGED.
• Refer to engTneowner's manual and follow oil and fuel
recommendatTons and instructTons,
NOTE: Check oTIoften durTng engTnebre_k4n, Refer to
engine owner's manual for recommendations,
Connect Hose and Water Supply to
Pump
IMPORTANT: To avoid pump damage, you must _ssemble
_he nozzle extension to the spray gun and attach all hoses
before you s_r% the engine,
I, Uncoil high pressure hose and att._ch one end of hose
to base of spray gun (Figure 4),Tighten by hand,
NOTE: Remove and discard all pump shipping caps before
at_ching hoses,
2, Attach other end of high pressure hose to high
pressure outlet on pump (Figure 5),Tighten by hand,
_t, Run wa_er _hrough your garden hose for 30 seconds
to clean out any debris,
IMPORTANT: DO NOT siphon standing wa_er for the
wa_er supply, Use ONLY cold water (less than 100:F),
S, Connect _he garden hose (not to exceed S0 feet in
length) to the water inlet_Tighten by hand (Figure 6),
CAUTION
6, Turn ON the wa_er and squeeze the trigger on the
gun to purge the pump system of air and impurities,
/7

GeneracPortableProducts2100PSIPressureWasher
CH ECKLIST BEFORE
STARTING ENGINE
Review t:he unft:'sassembly to ensure you have pert'ormed
all of t:he following.
I, Make sure handle is fn place and secure,
2, Check that oil has been added to proper level fn the
engine cran k_se,
3, Add proper gasoline to fuel tank,
4, Check for properly t:fghtened hose connect:ions,
5, Check to make sure :here are no kfn_, cuts, or
damzge to high pressure hose,
6. Provide a proper wa_er supply at an adequate flow.
7, Be sure to read "S_fe_ Rules" and "HowTo UseYour
PressureWasher" before using pressure washer.
HOWTO USE YOUR
PRESSURE WASH ER
If you have any problems operating your pressure washer,
please call t:he pressure washer helplfne at:
1-800-270-1408.
How to StartYour Pressure Washer
To s_rt your pressure washer forthe first: time, follow
these fnatruc_ions st:ep-by-s_ep.Thfsstar_fng information
also applies if you have let the pressure washer sit idle for
at least a day.
l,
2,
Place pressure washer near an outside wa_er source
c_pable of supplying water at:a flow rate great:er t:han
3.0 gullons per minute and no less t:han 20 PSI at:
pressure washer end of garden hose.
Check that high pressure hose is tightly connect:ed t:o
spray gun and pump. See "Preparing Pressure Washer
for Use" for illustrations.
3. rvlakesure unit is in a level position.
4. Connect: garden hose to water inlet: on pressure
washer pump. Turn ON water.
CAUTION
5. At_ch adius_ble nozzle extension to sprm/gun
(Figure 7).Tighten by hand.
5, Position nozzle in low pressure mode (see "How t:o
Use t:heAdjustable Nozzle") and squeeze t:rf_er on
spraygun t:orelieveairpressurec_used by turningON
wa_enWat:er will flow out of spray gun in a thin
stream. Continue to hold trigger until :here is a steady
stream of wat:er and no air remains in system.This will
make it easier t:o pull s_r_ engine. Release t:ri_er.
7, E%=zgusafetylatchto spraygunt:rf_er (Figure8).
,
Szfe ytch
Start engine according to fnst:ruci;fons given in engine
owner's manual,
NOTE: If :he recoil star_er is hard to pull, squeeze the
spray gun t:rfgger to relieve int:ernalpump pressure,
NOTE: Always keep the throttle lever in the "Fast"
position when operating the pressure washer.
/8

Generec Portable Products 2100 PSIPressureW_sher
How to StopYour Pressure Washer
I. Let engfne idle for _vo mfnutes.
2. "l'urn engine off accordfng to instructfons gfven in
engine owner's m;_nual,
3, Squeeze trigger on the spray gun to relieve
pressure in the hose.
NOTE: A small _mount of w_r will squirt out when you
release the pressure.
How to Use the Adjustable Nozzle
You should now know how to START _nd STOP your
pressure w_sher.The fnform_tJon in thfs sec_Jon will tell
you how to adiust the spray pa_rn and to _pply detergent
or ol:her cleaning chemicals.
CAUTION
I, Slide nozzle forward when you wish to _djust spray to
low pressure mode (Figure 9), Slide nozzle b_ckw_rd
:o _chieve high pressure,
Slide nozzle b_ckw_rd
for Hfgh Pressure
Mode
Slfde nozzle forward for low
pressure mode and
detergent applicatfon
2. Pointnozzle down towardsafTrmsurface _nd press
triggerto _est p_t_ern (Figure I0),
3. Twfstfng nozzle_djus_ spray p_ern from a n_rrow
p_t_ernto _ fan pattern (FigureI I).
Rotate nozzle
counterclockwfse forfan
spray pattern
Rotatenozzle clodcwfse
for narrow spraypattern
5.
6.
For most effective cleaning, le_epspray nozzle from
8 to 24 fnches _w_y from cleaning suff_ce,
If you get spray nozzle _oo close, especfally usfnghfgh
pressure mode, you may d_mage surface befng cleaned,
DO NOT get closer than 6 inches when cleaning tfres,
/g

GeneracPortableProducts2100PSIPressureWasher
Applying Detergent with the
Adiustable Nozzle
IMPORTANT: Use soaps designed specifically for
pressure washers. Household detergents could damage
the pump. CAUTION
To apply detergent, follow these steps:
I, Revfewuseof adjus=ble nozzles,
2,
3, Prepare detergent solution as required by iob.
Place filter end of chemical injection hose into
detergent confiner.
CAUTION
4. Slfde adiustable nozzle forward to low pressure mode.
Detergent cannot be applied with nozzle in hfgh
pressure posi_iom
5. Make sure g_rden hose is connected to water fnlet.
Check that high pressure hose fs connected to spray
gumand pump. Start engfne.
6. Apply detergent to a dry su_ace, starting at lower
portion of area to be washed and work upward, using
long, even, overlapping strokes.
7. Allow detergent to "soak fn" for 3-5 mfnutes before
washing and rinsfng. Re_pply as needed to prevent
surface from dryfng, DO NOT allow detergent to dry
on (prevents streaking),
IMPORTANT: You must flush the chemf_l fniec_ion
system after each use by placing the filter fnto a bucket of
clean water, then rum the pressure washer fn low pressure
for I-2 minutes.
Pressure Washer Rinsing
For Rinsing=
I. Slide the nozzle backward to high pressure, press the
trigger and wait for the detergent to clear,
NOTE:You c_n also stop detergent from flowfng by simply
removfng chemfcal injection hose from bottle.
2. Keep the spray gun a safe dis_nce from the area you
plan to spray.
3. Apply ahigh pressure spray to a small are_, then check
the surface for damzge. If no damzge is found, it is okay
to contfnue cleanfng.
,Keep Spraynozzle between8 to 2,4inches &wayfrom Cleaning
surf'aC_
, Be extremely _reful ({ FoumUSt Use_e pr_SSU_washer{rein
ladder.Scaffoid(ngOr a_ Other relatJveiyunscabieiocadeni
' Firmly grasp SP_ gunv_thboth handsw_en us!nghigh
4. Start at the top of the area to be rinsed, working
down wfth same overlappfng strokes as you used for
washfngand applyfng detergent.
Automatic Cool Down System
('l-hernnal Relief)
If you rum the engine on your pressure washer for
3-5 minu_es without pressing the trigger on the spray gun,
circulating wa_er in the pump c_n re_ch temperatures
above 125°EThe system engzges to cool the pump by
discharging the warm water onto the ground.
mm_m 10

Generec Portable Products 2100 PSIPressureW_sher
SPECIFICATIONS
Outlet Pressure ..... 2100 psT
Flow Rate .......... 2,0 g_llons per minute (gpm)
De_rgent .......... Use detergent approved for
pressure washers
Wa_r Supply ...... Not to Exceed 100°F
Temperature
Automatic Cool .... Will cycle when w_ter
Down System re_ches 125°=155°F
ShippingWelght .... 54 Ibs.
GENERAL MAINTENANCE
RECOMMENDATIONS
The pressure washer warrr_nL7does not cover items that
have been subiec_ed to operator abuse or negligence.To
receive full wlue from the w_rrenty, the operator must
mr_in_in the pressure washer _ instructed in this manual.
•Some _dlustments will need _o be m_de periodically to
properly main_in your pressure w_sher.
•All maintenance in _his manu_l and _he engine owner's
m_nual should be made at least once e_ch season.
• Once a year you should clean or replace the sparl< plug,
clean or replace _he _ir filter and checl<the spray gun
_nd _djus_ble nozzle extension _ssembly for wear.A
new sparl< plug and clean air filter _ssure proper fuel-_ir
mixture and help your engine run be_er and I_st longer.
Please refer _o your engine owner's m_nu_l for more
devils.
•If equipped with inflatable tires, keep the air pressure _t
_he v_lue m_rl(_d on _he _ire or within 15 _nd 40 psi.
Before Each Use
I. Check engine oil level.
2. Check water inlet screen for damage.
3, Check in-line filter for d_mage.
"t. Check high pressure hose for leal<s.
5. Check chemical injection hose and fll_er for damage.
6. Check spray gun and _djus_ble nozzle extension
zssembly for le_ks.
7. Rinse out g_rden hose _o flush out debris.
PRESSURE WASH ER
MAINTENANCE
Check and Clean Inlet Screen
Exr_mine1:hescreen on the water inlet. Cler_n it if the
screen is clogged or replace it it"screen is dr_maged.
Check Hish Pressure Hose
The high pressure hose can develop le_ks from wear,
kinl<ing, or _buse. Inspect the hose each _ime before using
it. Check for cuts, leal<s,_br_sions or bulging of cover,
d_mage or movement of couplings. If any of _hese
conditions exist, replace _he hose immediately.
Check Chemical Iniection Hose
Exr_mine1:hef_l_er on the detergent tube r_ndcle_n if
clogged.The tube should fit tightly on the b_rbed fitting.
Exr_mine1:hetube for leal<sor refers. Replace the filter or
_ube if either is d_maged.
Check Gun and Adjustable Nozzle
Extension
Exr_mine1:hehose connection to the spray gun and mr_ke
sure it is secure.Test 1:hetrigger by pressing it r_ndmr_l<ing
sure it "springs b_ck" into pl_ce when you release it. Put
1:hesafety latch in the ON position and test the trigger.You
should not be _ble _o press the trigger.
/II

Generac Portable Products 2100 PSI PressureWasher
Purge Pump of Air and
Contaminants
To remove air from the pump, follow these s_ps:
I, Set up pressure washer as descrfbed fn _Preparfng
Pressure Washer For Use", Connect wa:er supply and
_rn w_:er on,
2, Pull trfgger on spray gun and hold.
3, When w_ter supply is steady and constant, engage
safety la:ch.
To remove €on_rnlnants from the pump, follow
these steps:
I, Set up pressure washer as descrfbed fn _Preparfng
PressureWasher For Use". Connect water supply and
_rn w_:er on,
2, Remove nozzle ex_ensfen from spray gun.
3, Star_ engine according to fnstructfens in "Flow To Use
Your Pressure Washer".
4, Squeeze :rigger on spray gun and hold,
5, When w_ter supply is steady and constant, engage
safety latch and refasten nozzle extension,
Check In-Line Filter
Refer to Ffgure 12 and service the in-line filter if ft
becomes clogged, as follows:
Nozzle E_ension
O-rin
.
4.
I. Detach spr_ gun and nozzle ex!;ension from high
pressure hose. De_ch nozzle extension from spray
gun and remove o-rfng and screen from nozzle
ex_ensfon, Flush screen, spray gun, and adjustable
nozzle extensfon wfth clean water to clear debris,
2. Place in-line filter screen fnto threaded end of nozzle
ex_ensfon, Directfon does not matter, Push screen fn
with eraser end of pencil until ft rests 11atat bottom of
openfng.Tale_=_re not to bend the screen,
Place o-rfng fnto recess, Push o-rfng snuglyagainst fn.
line filter screen.
Assemble nozzle extension to spray gun, as descrfbed
earlier in manual,
O-Ring Maintenance
Purchase an C_Rfng/Mafntenance Kit, part number
191922GS by contacting the nearest authorized servfce
center. It fs no: included with the pressure wzsher, Thfs kft
includes replacement o-rfngs, rubber washer and water
inlet filter. Refer to the fnstructfon sheet provfded in the kft
:o service your unit's o-rings,
Cleaning Chemical Injection Hose
If you used :he chemi_l fniectfon hose, you must flush ft
wi:h cle_n water before stopping :he engine.
I. Place chemi_l fniection hose fn a bucket full of clean
water,
2. Slide adjustable nozzle forward to low pressure
position, Flush for I-2 mfnutes,
3. Shut off engine.
IMPORTANT: Simply shutting OFF engine will not
release pressure fn :he system,When the engine has
shut down, squeeze the trigger on the spray gun to
relieve the pressure in the hose.
/12

Generec Portable Produc:s 2100 PSIPressureW_sher
Pump Maintenance
Changing Pump Oil
Change oil every S0 hours or once yearly, whichever
occurs fTrst,
NOTE: Purchase _ preme_sured bo_le of pump oil, i_m
number 190586GS, by contacting the nearest authorized
service center.
Change pump oll as follows:
I, Drain engine oil and fuel from pressure washer,
2, Use • 8ram allen wrench to remove bbck pump oil
c_p be_en high pressure outlet and g_rden hose
inlet (Figure 13).
3. Tilt pressure wzsher _o drain oil into an _pproYed
container until it drips slowly from pump.
4. Tilt pressure wzsher in opposfte direction _nd empty
premeasured pump oil bo%le fnto s_me openfng (_
sm_ll funnel may be helpful).
S. Install bbck pump oil cap and tfghten firmly.
6. Set pressure wzsher in upright position.Add fuel _nd
engine oil.
ENGINE MAINTENANCE
See _he engine owner's m_nual for instructions on how to
properly maintain _he engine.
m] [_I_mljm_Eell
KEEP OUT OF REACH OF CHILDREN, DON'T
POLLUTE. CONSERVE RESOURCES. RETURN
USED OIL TO COLLECTION CENTERS,
I13

Generac Portable Products 2100 PSI PressureWasher
PREPARING THE UNIT
FOR STORAGE
Water should not remafn in the unft for long perfods of
time, Sedfments or minerals can deposit on pump parts and
==freeze" pump action. If you do not plan to use the
pressure washer for more than 30 days,follow this
procedure:
I. Flush chemical fniectfon hose by placing filter fnto a pall
of clean water whfle running pressure washer fn low
pressure mode (adiustable nozzle fn forward positron),
Flush for one to two mfnutes,
2. Shut off engine and let ft cool, then remove high
pressure and garden hoses, Disconnect spark plug wire
from spark plug,
3. Empty/pump of all pumped liquids by pullfng recoil
handle about 6times,Thfs should remove most liquid
in pump,
4, Use PumpS_ver to prevent corrosion bufld up and
freezfng of pump.
5. Store unft in a clean, dry area.
Protectin 8 the Pump
To pro_ect the pump from damage caused by mfneral
deposfts or freezing, use PumpSwer to treat pump, Thfs
prevents freeze damage and lubricates pfstons and seals.
NOTE: PumpSaver is available as an optfonal accessory, It
is not included with the pressure washer. Conts_ tile
nearest audlorfzed service center to purchase PumpSwer,
CAUTION
CAUTION
! A!w_ wear c_e protectionwhen usingPurnpS_cer.
To use PumpSayer, make sure the pressure washer is
turned off and disconnected from supply water. Read and
follow all instructfons and warnings given on the PumpSaver
container.
NOTE: PumpSaver will drip from pump after treatment
and wfll s_in wood and concrete,
NOTE: If PumpS_ver fs not avaflable, draw RV antffreeze
(non-alcohol) into the pump by pouring the solutfon fnto a
3-foot sectfon of garden hose connected to fnlet adapter
and pullfng recoil handle wcfce,
STORING THE ENGINE
Seethe engineowner's manualfor instructions on how to
properlyprepare the engine for storage,
/14

Generac Por_ble Produc_s2100 PSIPressureW_sher
TROUBLESHOOTING
Problem Cause Correction
I; NOZZ!e Tn!ow pt_ssut_ mode, I; _!l nozzle b_ckwar_ for high
I
2i W_er inle_ is block_di 2i Clear inlet,
3; I_adequ_te _ter supply, 3; Provide _de_u_e w_er fl0w,
faJ!ure t0 p_dUce pressure; _i C[e_ed !_let h0Se s_rziner, _i Gh_k znd €!e_n !_let _0Se
erratic pressure, chat_r!ns; !oss s=rainer,
°_Pre_ureil°w_'_ _°lum_i I_w_ _!_ i__v_I_. I_i _vi_ _0_ _
7i HighpressU_h0Seisb!o¢_d0_
9i Nozzle iS ObS:ruc=edi
IO_ Purnp is _ulty,
I i De_er_t Siphoning _be is _ot lil_se_de=erge_tSiphoningtube
s_bmergedi i i_to cle_rg_ti
;2 C_emic_lfflterisclo edor 2 Cleanorr_ I_Cefil_ertde_rve_t
Oei;ergen/: finis to m_x wH;h spray÷ _ P .o
Cr_Ckedi SiPh0ning t_bei
4i Nozzle is in high pressure m0dei 4i P_sh _0zzle forward for IO_
I P_SS_ m0dei
E_g!_e _p_ed i_ ;00 S!0w. H0ve th_l_ €on_l _ FAST
Engine runs good a_ no-!oad but ................................................................ pOSt 0n. !f e_g ne st !! b0gs down .......
..... h nl "i _" " ; " ;
cogs w e
Pressure Washer s_0ps dur!ng F!II fuel _nl_
I I
/15

Generac Portable Produc_ 2100 PSI PressureWasher
EXPLODEDVIEWAND PARTS LIST- MAIN UNIT
900 _2
11
Item Part # Description Item Part # Description
I192419GS BASE 10 21760GS ORIFICE
2 BI91874GS HANDLE I I 192309GS KIT,Hook
3 I9Ig09GS BILLBOARD 12 192050GS KIT,E-Rfng
4 190249GS HOSE 13 188792HGS WAND, Adjustable Nozzle
5 192525GS KIT,Pump Mounting Hardware 14 19231IGS KIT,Wheel
6192128GS KIT,Hook IS 23139GS KEY
7 190132GS GUN 16 191693GS ASSY,Pump (see pa_e 17)
8 B2203GS KIT,Handle Conne_or 900 NSP ENGINE
9192310GS KIT,Vibration Mount
Items N0(; Illus(;rated:
Part# Descript:i0n
193729GS P1ANUALi
193911GS K!T, De_a!s
BB3061BGS OILi Engf_e
/16

GeneracPortableProducts2100PSIPressureW_sher
EXPLODEDVIEWAND PARTS LIST- PUMP
½
®®
H
If._m Part #
19 190571GS
28 190627GS
29 190575GS
30 190576GS
34 190577GS
45 190578GS
46 190629GS
47 190630GS
62 190581GS
68 190582GS
69 190584GS
76 21783GS
Description
CAP, Oil
MANIFOLD
O-RING
SCREW
CONNECTION, Chemical Inlet
PIN
VALVE, Se._ PI_, Plastic
VALVE, Se_t, Plastic
CAP
BALL, SS
O-RING
THERMO RELIEF
Item Part #
A NSP
B190632GS
C190634GS
E190591GS
F190592GS
G 190593GS
H 190628GS
J189971GS
K190636GS
Description
ASSY,CASE, PISTON
KIT,WATER INLET, ALUM
KIT, OUTLET,ALUM
KIT,CHECK VALVES
KIT, INLET CHECK
KIT, CHEMICAL INJECTION
KIT, UNLOADER STEM
KIT, CHEMICAL HOSE
KIT, SEAL SET
NOTE: Item letters B - Kare service kits and include _11
p_rt_ shown within the box,
/17

I-avador_de Presibn 2100 PSIde Generic Portable Produc_s
TABLA DE CONTENIDOS
Regl_sDe Segurid_d.............
Conozc_ Su Oenerador ...........
Ensamblaie .....................
Funcionamienco .................
Especificaciones DOI Producto ......
_ancenimiento ..................
Almacenamienco .................
Di_nosdcos De AverJ_ ...........
Piezas De Kecsmbio .............
................. 18-20
................... 21
................. 22-23
................. 24-26
................... 27
................. 27-29
................... 29
................... 30
................. 16-17
Gar_nti_ ............................................ 31
DESCRIPCI( N DEL EQUIPO
Lea este rn_,nual de nn_ner_ culd_dos_ y
_fannili_Hcese con su I_v_dor_ _presi6n, Conozc_
sususos, sus lirnitaclones y cu_lquler peligro
relaclonado con el misnno,
$e ha hecho c_daesfuerzo posible par_ asegurarseque la
inform_ci6n que apareceen este m_nual es ex_c_ y se encuenCra
scCualizad_Sin embargo,noso_ros se reservs el derechos
csmbisr,alcer_ro de oCramanera meiorar, el producCoy esce
documenCo en cuslquiermemento, sin previo arise,
-n el estado de California es obligscorio, seg0n IsIcy,el use de
_pagschispas(Secci6n 4442 del C6digo de RecursosPOblicosde
California). OCros esCadospueden cener leyessimilares.I.asleyes
_ederalesse aplican en derras federales.Si equips el silencisdor
con un spa_achispa_,escedeber_ ser msncenido en buenas
:ondiciones de crabajo.
REGLAS DE SEGURIDAD
AEste es el sinnbolo de alert_ de seguridad. Sirvep_ra advertir al usu_Ho de un posible riesgo par_
su int_grldad fisic_..Sig_.t_dos los mensajes de
segurldad que figuren despu_s de este simbolo
p_,ra evitar leslones o induso I_,rnuert_.
El sfmbolo de alerta de se_uddsd (_.) es ussdo con uns palsbra
(PELIGRO.ADVEKTENCIA_ PKECAUCI(_N), un mensaie per
escHto o uns iluscracibn, psra slerr_rlo acerca de cualquier
situscibn de peligro que pueda exisdr. PELIGRO indica un Hesgo
el cual, si no se evita, ceuserO Is muerce o una heHda grave.
ADVERTENCIA indies un riesgo el cusl, si no se evit_, puede
csusar la muerCe o uns herids grave. PRECAUCI6N indica un
riesgc_ el cual, s( no se evita, puede csussr heridas menores o
moderadss. PRECAUCI6N, cuando se usa sln el sfmbolo de
slerr._ indica una situscibn que podris r_sultar en el da_o del
equipo. Sigs los mensaies de sc_uddsd par_ evit_r o mducir los
riesgos de her(des e inclusive la muerCe.
ADVERTENCIA
El escape del rnotor de este producto contiene
elernentos qu_rnicos reconoddos en el Esi_do de
Calit_rni_. pot p_odudr c_.ncer,defectos de nacinnlento u
otros d_Bos de tlpo reproductlvo.
Simbolos de Peligro y Signiflcados
G_es T6xicos Descs_a El_cCrica
SuperficiesResbalosss Caer Inyecd6n Liquida
Fuego Explosi6n Superficie Caliente
Parcesen P1ovimienCo Ob(c_osVolsdoms Concragolpe
I18

Lavadorade Presf6n2100 PSIde Generac Portable Products
PELIGRO
ADVERTE NCIA
H_n_eng_i_boqUilla _[er_ciad0 de8a 2Apu/_das de I_ superfide de
!imp!e_
+OPe_ y ah_acel_ee_ta un!dadsobr_un_ suPe_de e_l_b!ei
_El_-!'e_d_ l!mp!eT;_deber_ tear in¢!in_¢!0_s y dmnaJes=-decuad_s
para _Jsminuir b.p_$ibilid_ _e _id_Lsdebi_O &S_(pe_i_iesreSbaJosaSi
_e,3e_o,eraadamen_ecuidadO$O siUs&lam_quinalav&do_ ;_FmSi6n
desdeuna esc_Jera,andamIo e_u=-Iquiersuperficie_&Uvamen_e
_ _uje_e !apiS_O!ad_ !&h)d_!&v_dOi_firmera_nte €0n amb_ ni_ui0s
Cuand0U_ili_eel _dad0 a =Jm presi6niD_ es_ m_nei_
Iesi0nes produ¢idaspot el p_sible_olpe de lapis_olaha¢i_
ADVERTENCIA
C UAN DO Ai_IADA COM BU$'I'i B LE
_AP_Ue el gene!_ad0r(posici_n OFF) Y d6jelo er_d_ a!menospot
_I-lene el _tnque _1_il_ [i_rei
NO lien8 demasiad_ el _nque, Perm_ _1 men0s esp_i0 p_P_ I_
exp_mS!_nde! _0mbusub!e+
_IH_n_engaI_@s01!na=_!ejad_dechisp_si !l_niasabie_, pil_s_ _ler y
CUANDO OPERE EL EQU!PO
NO incJineel motor oel equipo;decal i_e_ que la @selina se
_NO _cie llquides inllamables.
CUANDOTRANSPORTE O REPARE EL E_UIPO
Transper_e 0rep_re elequipo con el t_r_ue de combustible_adei O
c#n !a_'_!Wd&I_ra a_r e! Combustible_da (posi_i6n
CUANDO ALMACENE O GUARDE EL EQUlPO CON
COMBUSTIBLE EN EL TANQUE
A!m_cene_leJ_dod_ _alder_, es_ufasi_aler_de_s de _U a+_ec_do_
de _pa u_$ ap_ra_os_lecu_d0m6sOcos que p_sea!!pIIO_oSU
O_r_S Eient_sde igr,ici_n; _rque el!os pueden _iCender los"_a_r_S
iiiADVERTENiCIAiiiiiiiiiiiiiiiiiiiiiii
I19

I-avador_de Presibn 2100 PSIde Generic Por_ble Products
ADVERTENCIA PRECAUCION
NO _asegUreI_pE_I_ de _¢i_do en la p0sK,i_n (open =abierto)i
_ NO _dobe la pi_tol_,d_ rociadO Outdo la i_,_quinaOS_
_ NUN CA uti!ice ur_ pistO!ade _¢iadO que no teng_ _m segu_
_ti!lo 0pror.ecci6nparagatJl!o_n su !u_r _"en _uen_s_di¢i0nesi
_ Sien_preaseg_se dequ_ la pis_l_ de _iadOib_uil!as y _cCesorio$
PRECAUCION
ADVERTENCIA
PRECAUCION
_ Si Usted tiene _.Ig_Hiapr'egUii__cer_a de ]aSfin_!idBdesde U_del
_l_eP_ldor_ pregl_rlt_.Je• _U _on_e_iOl1:_rio o conir_tct.e ;_Brig, s
_r_Oil Power' Pr_ductsL
_ NUN_ debe_ SetO_S I_ un!d_descon pae_s r_s
_ NO elud_ ning6n disposiuv0 de S_rid:td de es._ m;_quin_.
An_s de porter en r_rcb_, la r_tqUiba I_'_0ra _.pr_Si6n en €lima
fr{0i _ise _S I_ pa_S de Iequipo y asegor'esede que 1!0 se ha_
NUN_ rnueva la mgquina halando larnm_guei'_ de al_ presi6n.
Revise que el siscema de combustible i_opresente Iugas o signos de
det_ri_, como _ngue!_s des_d_ 0 PO!_SaSi_je_doreS flOJOS
ausen_esi tapao _nque dafiac]OS.CO _iia _os lOSde{ectosabt_s
de opera_ la m_quina lavador& _ presibn.
El equlpo de _J_ presi_13 es_ dise_do p_ra se_ udli:_ado
UN!CAHENTE _O_ Ins parses aucori_das Br]_ &Stra_on Power
Pr_U¢_i Si Utili_ eS_ equipo t;0n p_rteS qUe n0 bUrlipl_l_ _l_ I:i_
_pe¢_i¢_¢!0!les m!bimasi el Usu_r!0 _!me _0s !Os
I2O