Ger Detect Gold Hunter User manual

English User Manual


English User Manual

GOLD HUNTER
METAL DETECTOR
Critical Warning
•••
Please be sure that all precautions
taken against risks
Do not use your device while it is
raining or on extremely wet floor
Turn on your device after you make
sure that all parts are in place
Make sure that the device battery
is fully charged before searching
If the battery start to give a peep
sound, close the device and
recharge the battery
Do not start the pulse induction
system without connecting the coil
cable to the device, other ways the
device will stop in the middle of
opening
It is recommended to read the user
manual before start working on the
device to understand everything
and to avoid mistakes doing the
search
After the device start make sound
and turn off automatically put the
battery on charge and do not try to
start the device without charging
the battery
Overview
➢
Dear customer, thank you for choosing
GOLD HUNTER DEVICE.
➢
This product enables you to detect the
presence of gold & diamond & gems.
➢
GOLD HUNTER designed to help
you discover GOLD, DIAMOND,
GEMSTONES
➢
In addition, it can confirm your target
and identify the type underground
with the depth.
Be aware of high voltage resources, and
do not use any charger other than the
original charger that come with the
device
Main unit of the device is under
warranty against all electronic
breakdowns for two (2) years
Any damages caused by user errors
(laying open the main unit, hits, harms
etc.) are not within this warranty
Battery and antenna are also not within
this warranty
You should follow the instructions in
this user manual strictly to minimize the
faults and to use your device correctly

English User Manual

THE DEVICE SYSTEM AND WORK STEPS
Super antenna
Dispatcher Antenna
Recipient antenna
THE LONG RANGE SYSTEM
1
This system specializes to cover vast areas and locate the target with in 1meter
Square and depths up to 35 meters below the surface of the ground and Front
Range up to 2,000 meters.
CONNECT THE LONG RANGE PARTS TO THE DEVICE
CONNECT THE HANDLE TO THE DEVICE

English User Manual

CONNECT THE SIGNAL TRANSMITTER
CONNECT THE SUPPER ANTENNA
CONNECT THE SIGNAL RECIPIENT

English User Manual

SWITCH (ON / OFF) BUTTON
THE DEVICE WORKS ON FOUR LANGUAGES
(GERMAN-ENGLISH-FRENCH-ARABIC )
The user should position them self
from the north to the self which is
the best method to detect
underground, GOLD, DIAMOND
AND GEMSTONES.
OPEN THE DEVICE THROUGH THE ON OFF

English User Manual

After selecting the language, you want to work in (English for example)
You have to select TARGET TYPE select (GOLD NATURAL for example)
Choose the Front Range according to the area you want to reach you can select
between
(0500-1000 -1500 -2000)M

English User Manual


English User Manual

After selecting the Front Range, the search screen will appear which contain an
indicator, which will start to move, and the device will start to issue a pep sound,
which is the signal
Transmitter conforming that is the device work correctly
When you will reach the target, the device will turn to the back
That’s mean
that you just past the target you will stop and point the target in 1 M
square

English User Manual

Increase the length of the signal recipient antennas to enable the device to detects the
target even to 2000 meters
NORTH TO SOUTH
SOUTH TO NORTH
EAST TO WEST
WEST TO EAST
After detecting the target, conform the target from for direction

English User Manual

To determine the depth of the discovered target, stand above target and
turn
45 degrees
Walk straight ahead until the antenna reverse to the back