Ger Detect GOLDEN WAY User manual

DEEP SEEKER DEVICE

•
Section 1:
Critical Warning
•
Section 2:
Overview
•
Section 3:
Definition of the main unit buttons & leds
•
Section 4:
The device feature and specifications
•
Section 5:
Golden way device parts connecting
•
Section 6:
Golden way device operation steps
•
Section 7:
Golden way device using warnings
•
Section 8:
The device parts and accessories

- Please be sure that all precautions are taken against risks.
- Do not use your device while it is raining or on extremely wet floor.
- Turn on the device after you make sure that all parts are in place and connected.
- Make sure that the device battery is fully charged before you start the search.
- If the device starts to give a beep sound, close the device and recharge the battery.
- when the battery will almost die the device will close automatically.
- It is recommended to read the user manual before starting on the device to understand
everything and to avoid the mistakes through the search.
- After the device starts to make sound and turn off automatically, put the device on
charge and do not try to switch it on twithout charging the battery.
- Be aware of high voltage resources, and do not use any charger other than the original
charger that comes with the device.
- Main unit of the device is under warranty against all electronic breakdowns for two (2)
years, any damages caused by user errors (laying open the main unit, hits, harms etc.) are
not within this warranty.
- Headset and charegers are not under the warranty.
- You should follow the instructions in this user manual strictly to minimize the faults and
to use your device correctly.
We wish you all the best of luck in your search……
Critical Warning

OVERVIEW
Dear customer,
“Thank you for choosing GOLDEN WAY”
✓This product enables you to detect gold nuggets, precious, and non-precious metal buried
underground.
✓The world's first-of-its-kind device that operates on VLF system to detect internal treasures
such as gold nuggets, precious metals and ancient coins.
✓Golden way is designed to operate in all kinds of terrain and in the most difficult climatic
conditions.
✓Golden way can skip all kinds of minerals and mineral rocks using automatic calibration
technology.
✓The device depth is up to 3 meters under the ground.

Definition of the main unit buttons & led
Description
Battery Indicator:
Battery charge percentage indicator from 1 to 6 levels.
Ignore iron button:
is to ignore the ferrous or non-precious metals.
Positive (+) and negative (-) buttons: to control the sensitivity of the search coil.
ON / OFF button
The sensitivity indicator ranges from 1 to 6 levels.
Ferrous indicator: red color indicates the presence of non-precious metals (iron).
Ignore iron indicator: blue color denotes ignoring ferrous metals (ignoring iron).
Non-Ferrous indicator: green color indicates the presence of precious metals (other
than ferrous).
1
8
7
6
5
4
3
2

Description
Charching Indicator:
It turns on red when the battery needs to
be charged.
It turns on green when the battery is fully charged.
Bluetooth headset ON / OFF button
The headset cable port.
Bluetooth indicator: It turns on when the bluetooth is active.
The coil cable port.
The charger port.
1
6
5
4
3
2

Golden Way device integrates an advanced automatic (VLF) system
with high accuracy in identifying metals, up to a depth of 3 meters
underground.
The fastest and easiest system to detect gold nuggets, raw gold, and
underground gold, bronze, and silver coins.
Golden Way device is featured by a fully automatic operation
system that is not affected by soil types: humid, or rich in mineral
salts or mineral rocks.
That is, it can bypass all types of mineral rocks, using automatic
calibration technology, including sedimentary, metamorphic, and
igneous rocks, which consist of two types:
Granite and basalt:
They are among the worst types of rocks that hinder the work of
many devices in the market, due to the change of the rocks as a
result of their chemical interaction with the earth and their
transformation into rock tissue, i.e., mineral components
So, you can start searching immediately without wasting time
programming the device.
The device feature and Specifications

The Golden way device parts connecting

The Golden way device operation steps
How to connect the Bluetooth headset to the device.
- Turn on the Bluetooth headset by the
ON / OFF button on the headphone.
- Turn on the Bluetooth in the device via the button on
the back of the main unit.
- Wait for two seconds until you hear a successfully
connected sound from the headphone.
Or you can also use the headphone cable by
connecting it to the designated place in the main
unit.
Turn on the device by pressing the ON/OFF
button for two seconds,
It will start on by making a sound.

Adjust the search coil to be parallel with
The ground by moving the coil up and down
Gently will Touching the ground
The search coil should be raised almost 2 cm
from the ground while keeping it parallel to
the ground.
-Start the search process by moving the
device left and right.

NON-FERROUS:when precious metal
(such as gold, silver, bronze, and coins,
…etc.) is detected by a signal, the device
will make a sound with the green
indicator on.
FERROUS:if the signal is emanating from
non-precious metal, the device will
sound in a different tone while the red
indicator lights up.
IGNORE IRON
: If you are only
searching for precious metals, press
the “Ignore Iron” button.
When non-precious metal is detected,
the device will hide the sound with
the red indicator on.
-The device has the capacity to
capture two metals (both precious
and non-precious at the same time)
and distinguish between them by
lighting the red and green indicators
and making two different sounds
instantly.

The Golden way device using warnings
Don’t keep the coil close to your body
while searching.
Don’t wear any metals on your hand.
Don’t put any type of metals in your
pocket for example, (coins, keys), or
mobile phone.
Avoid excessive contact with the ground

Note:
The target must be buried underground for many years, so that by the time
and interaction with the soil’s composition, an ionic field will be formed which
will help prospectors to detect the target.
Therefore, testing the device on metals laid on the ground
or newly buried under the ground will not show the real capacity
and functionality of this device to detect the target or to reach larger depths.
The reason for that is that the ionic fields are radiations
from gold and other metals that have been in the ground for a long time
and have intersected and interacted with the soil
and the nature of the earth as well as having been regulated
with magnetic fields north and south
These features do not actualize in gold and other metals
when they exist on the ground or newly buried.

The device parts and accessories
Safety bag
A warranty card
Main unit
Search coil
30x30 CM

Search coil
15x15 CM
Headphones
Car charger
Charger

The support arms
Armrest
Plastic screw
Multi Shovel