Gevi GECMD329AE-U User manual

[email protected]
COFFEE MAKER
INSTRUCTION MANUAL
GECMD329AE-U

IMPORTANT SAFEGUARDS
Read all instructions.
Do not let the coffee maker operate without water.
Make sure that your outlet voltage corresponds to the voltage
stated on the rating label of the coffee maker.
To protect against fire, electric shock and injury to persons
do not immerse cord, plug, or appliance in water or other
liquid.
Close supervision is necessary when your appliance is operating.
Do not let the appliance on the standby state for a long
time. And never allow the children or inform persons to
operate the appliance.
Unplug from outlet when not in use and before cleaning.
Allow to cooling before putting on or taking off parts, and
before cleaning the appliance.
1.
2.
3.
4.
5.
6.
Before using the electrical appliance, the following basic precautions
should always be followed including the following:
Dear Gevi customer
Gevi have focused on creating perfect home appliance for
our customer. In the past years, it took us time, lots of
research and many prototypes to achieve our goal. We
would like to give you a perfect using experience.
Thanks for purchasing our Gevi products. If have any
questions for our products , please kindly contact our Gevi
service team via email: [e-mail].

This appliance is not intended for used by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliances
by a person responsible for their safety.
Children should be supervised to ensure that they do not
play with the appliance.
To reduce the risk of fire or electric shock, do not remove
this cover.No user-serviceable parts inside. Repair should
be done by authorized service personnel only.
Do not touch hot surfaces. Use handles or knobs.
At least one copy of this manual should be kept in a location
available at all to maintenance and management staff.
The container is designed for use with this appliance. It
must never be used on a range top.
Do not set a hot container on a wet or cold surface.
Do not use a cracked container or a container having a loose
or weakened handle.
Do not clean container with cleansers,steel wool pads,or
other abrasive material.
15.
16.
17.
18.
19.
20.
21.
22.
23.
Do not operate any appliance with a damaged cord or plug
or after the appliance malfunctions, or has been damaged
in any manner. Return appliance to an authorized service
facility for examination, repair or adjustment.
The use of attachments not recommended by the appliance
manufacturer may result in fire, electric shock or injury to
persons.
Do not use outdoors.
Place appliance on flat surface or table, do not let cord hang
over edge of table or counter, or touch hot surface.
Do not place on or near a hot gas or electric burner, or in a
heated oven.
Do not use appliance for other than intended use and place
it in a dry environment.
Remove plug from wall outlet, always hold the plug, never
pull the cord.
During brewing, do not open the water tank cover to avoid
splashing.
7.
8.
9.
10.
11.
12.
13.
14.

SAVE THESE INSTRUCTIONS HOUSEHOLD USE ONLY
a) A short power-supply cord (or detached power-supply cord)
is to be provided to reduce risks resulting from becoming
entangled in or tripping over a long cord.
b) Longer detachable power-supply cords or extension cords
are available and may be used if care is exercised in their use.
c) If a long detachable power-supply cords or extension cord is
used,
1) The marked electrical rating of the detachable power-supply
cord or extension cord should be at least as great as the
electrical rating of the appliance.
2) If the appliance if of the grounded type, the extension cord
should be a grounding-type 3-wire cord,
3) The longer cord should be arranged so that it will not drape
over the counter top or table top where it can be pulled on by
children or tripped over.
This appliance has a polarized plug, To reduce the risk of
electric shock, this plug is intended to fit into a polarized outlet
only one way, If the plug does not fit fully into the outlet,
reverse the plug, If it still does not fit, contact a qualified
electrician, Do not attempt to modify the plug in any way.
NOTES ON THE CORD PLUG
NOTES ON THE CORD
KNOW YOUR COFFEE MAKER
Funnel
Anti-drip valver
Carafe
LCD
Top lid
Water tank
Main Housing
Bottom cover

Check that all accessories are complete and the unit is not
damaged. Add water into water tank to the MAX level of water
gauge and brew water for several times without coffee powder,
then discard the water. Clean all detachable parts thoroughly
with warm water.
Add coffee powder into paper filter. Usually a cup of coffee
need a level spoon of coffee powder, but you may adjust
according to personal taste. Close the top cover completely.
Insert the carafe on the warming plate horizontally.
Plug the power cord into the outlet. The LCD will display
“AM12:00” together with the “ : ” flickers.
Press ON/OFF button, the indicator of RUN will be illuminated.
The appliance will begin working.
The brewing process can be interrupted by pressing the
ON/OFF button at any time, and the indicator of RUN will be
extinguished. The appliance will continue brewing once
ON/OFF is pressed again.
NOTE: You can take out carafe, pour and serve at any time.
The appliance will stop dripping automatically. But the
time cannot exceed 30 seconds.
Remove out carafe to serve when finish brewing (about
one minute later after the coffee stops dripping out.)
NOTE: The coffee you get will less than the water you have
added, as some water is absorbed by coffee ground.
When the process is finished, if you do not want to serve
immediately, keep the coffee maker is energized, the coffee
can be kept warm in the warming plate, and the appliance
3.
4.
5.
6.
7.
8.
9.
Open the top cover and fill the water tank with drinking
water. The water level should not exceed MAX level as
indicated in the water tank.
Place the funnel into the funnel support, make sure it is
assembled correctly, otherwise the top cover cannot be
closed. Place a paper filter in the funnel.
1.
2.
CONTROL PANEL
BEFORE FIRST USE
USING YOUR COFFEE MAKER

CLEANING AND MAINTENANCE
DELAY FUNCTION
will be cut off power automatically after two hours if it has
not been manually disconnected at the completion of
brewing. For an optimum coffee taste, serve it just after
brewing.
Always turn the coffee maker off and disconnect the power
supply when not use.
NOTE: Pay attention to pour the coffee out, otherwise you
may be hurt as the temperature of coffee just finished is
high.
10.
CAUTION: Be sure to unplug this appliance before cleaning. To
protect against electrical shock, do not immerse cord, plug or
unit in water or liquid. After each use, always make sure plug is
first removed from wall outlet.
1) Clean all detachable parts after each use in hot, sudsy water.
2) Wipe the product’s exterior surface with a soft, damp cloth
to remove stains.
If you do not want the coffee maker to start operation
immediately, for example now it is 8:10 am, you hope that the
coffee maker will automatically start at 1:00 pm, first follow
steps 1 to 5 of above section, and then you can set the
automatic start function as follows:
1) Press PROG button one time, the word
CLOCK is showed at the up-right corner
on display.
2) Press the HOUR and MIN button
continuously to set the present time
(real clock), that is AM 8:10(See fig. 1).
NOTE: The time cycle is 12 hours.
3) Press PROG button once again and the word TIMER shows
on up-left corner of display.
4) Set the delayed starting time by pressing HOUR and MIN
button repetitively, that is PM 01:00 (see Fig. 2).
5) Press the ON/OFF twice, the indicator of AUTO is illuminated.
After a while, the LCD will display the current clock. You may
see the automatic start time by pressing PROG.
NOTE: You may cancel the automatic start function by pressing
ON/OFF. If you want to change the automatic start time, only
following the above 1-4 steps again.
6) When the time is due the indicator of AUTO will be off, while
the indicator of RUN turn on and the unit starts brewing. The
appliance will be cut off power automatically after two hours if
it has not been manually disconnected at the completion of
brewing.

REMOVING MINERAL DEPOSITS
HINTS FOR GREAT-TASTING COFFEE
Fill the water tank with water and descaler to the MAX level
as indicated in the water tank. (The scale of water and
descaler is 4:1, the detail refers to the instruction of
descaler. Please use “household descaler”, you can use the
citric acid instead of the descaler (the one hundred parts of
water and three parts of citric acid).
Put the carafe on the warming plate and ensure it is placed
in position.
1.
2.
Press the ON/OFF button once and the indicator of RUN will
be illuminated. After a while, water will drop out automatically.
After percolate the equivalent of one cup and then switch
off the appliance by pressing the ON/OFF button again.
Leave the solution work for 15 minutes. Repeat the steps of
3-5 again.
Turn the appliance on by pressing the ON/OFF button once
and run off the water until the water tank is completely
empty.
Rinse by operating the appliance with water at least 3
times.
3.
4.
5.
6.
7.
A clean coffee maker is essential for making great-tasting
coffee. Regularly clean the coffee maker as specified in the
“CLEANING AND MAINTENANCE” section. Always use fresh,
cold water in the coffee maker.
Store unused coffee powder in a cool, dry place. After
opening a package of coffee powder, reseal it tightly and
store it in a refrigerator to maintain its freshness.
1.
2.
3) Water droplets may buildup in the area above the funnel and
drip onto the product base during brewing. To control the
dripping, wipe off the area with a clean, dry cloth after each use
of the product.
4) Use a damp cloth to gently wipe the warming plate. Never
use abrasive cleaner to clean it.
5) Replace all parts and keep for next use.
To keep your coffee maker operating efficiently, you should
clean away the mineral deposits left by the water regularly
according to the water quality in your area and the frequency
use the appliance, the detail is as follows:

For an optimum coffee taste, buy whole coffee beans and
finely grind them just before brewing.
Do not reuse coffee powder since this will greatly reduce
the coffee’ flavor. Reheating coffee is not recommended as
coffee is at its peak flavor immediately after brewing.
Clean the coffee maker when over-extraction causes oiliness.
Small oil droplets on the surface of brewed, black coffee are
due to the extraction of oil from the coffee powder.
Oiliness may occur more frequently if heavily roasted coffees
are used.
3.
4.
5.
6.