Gevi GECME403-U User manual

COFFEE MAKER
INSTRUCTION MANUAL
GECME403-U

CONTENTS
1. WELCOME. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2. DESCRIPTION OF THE APPLIANCE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3. IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4. CORD & PLUG INSTRUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.1 SPECIAL NOTES ON PLUG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.2 SHORT CORD INSTRUCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5. MAIN OPERATION FUNCTION INSTRUCTION. . . . . . . . . . . . . . . . . . . . .
5.1 BEFORE FIRST USE OR A LONG TIME NOT USE . . . . . . . . . . . . . . . .
5.2 HOW TO MAKE ESPRESSO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.2.1 TROUBLESHOOTING DURING THE BREWING . . . . . . . . . . . .
5.2.2 HOW TO CLEAN THE SEAL RING . . . . . . . . . . . . . . . . . . . . . . . .
5.2.3 FROTH MILK AFTER BREWING ESPRESSO. . . . . . . . . . . . . . .
(FOR CAPPUCCINO). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.3 HOW TO MAKE MILK FOAM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.3.1 HOW TO CLEAN THE STEAM NOZZLE . . . . . . . . . . . . . . . . . . .
5.3.2 TIPS FOR HOW TO CONTINUE FROTHING . . . . . . . . . . . . . . .
5.3.3 BREW ESPRESSO AFTER MILK FROTHING (FOR LATTE). . .
6. CLEANING AND MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.1 DAILY TIPS FOR CLEANING AND MAINTENANCE . . . . . . . . . . . . . . .
6.2 REMOVING MINERAL DEPOSITS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7. TIPS FOR PERFECT BARISTA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8. TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
6
6
9
11
14
13
14
2
2
3
5
5
14
16
17
18
19
19
20
22
22
Thanks for purchasing our Gevi products. Gevi has focused on creati-
ng perfect home appliances for our customers. In the past few years,
it took us time to do lots of research and many prototypes to achieve
our goal. We would like to give you a different user experience. If you
want FAQs and more information, please feel free to contact us.
2
2. DESCRIPTION OF THE APPLIANCE
1. WELCOME
MODEL: GECME403-U
Electrical parameters: 120V~ 60Hz 1100W
Description
ON/OFF button
BREWING ESPRESSO
button
MILK FROTHING
button
Power indicator
Espresso function
indicator
Steam function
indicator
Making espresso
indicator
Double-cup filter
Portafilter
Filter holder
Removable cup shelf
Drip tray
Cup warming plate
Thermometer
Water tank
Steam control knob
Steam valve
Steam wand
Spoon & Tamper
Tank cover
Description DescriptionRe. Re. Re.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
4 6
5 7
28
3
1
9
10
12
13
11
15
16
17
18
19
20
14
30
100
180

Read these instructions carefully and keep it for future use. If this ap-
pliance is passed to a third party, then these instructions must be
included.
Before using the electrical appliance, some basic precautions should
always be followed including the following:
—1. Read all instructions.
—2. Before using, check the output voltage of the wall outlet should
be correspond to the rated voltage marked on the appliance’s rating
plate.
—3. To protect against fire, electric shock and injury, please do not
immerse cord and plug into water or other liquid.
—4. Unplug from wall outlet before cleaning and when it is not in use.
Allow the appliance to cool down completely before taking off, attac-
hing components or cleaning.
—5. Do not operate the appliance with damaged power cord or plug
after the equipment malfunctions, falls or operates the equipment in
any way causing damage. Return it to the nearest authorized service
for inspection, repair and electrical or mechanical adjustment.
—6. Using accessories not recommended by the manufacturer may
result in fire, electric shock or injury.
—7. Place the appliance on flat surface or table, do not hang power
cord over the edge of table or counter.
—8. Ensure the power cord not touch any hot surface of the appliance.
—9. Do not place the coffee maker on hot surface or beside fire in
order to avoid damage.
—10. To disconnect, turn off all control buttons, then unplug from
wall outlet. When unplug the appliance, always hold the plug and do
not pull the cord directly.
—11. Do not use the device for other purposes than its intended uses
and place it in a dry area.
—12. Close supervision is necessary when your appliance is being
used by or near children.
—13. Be careful not to get burned by the steam.
—14. Do not touch the hot surface of the steam wand ⓳ and filter
holder ⓫ when boiling directly. Use handle or knobs.
—15. Connect plug to wall outlet before using and turn all buttons off
before the plug being removed from wall outlet.
—16. Relieve pressure through steam wand ⓳ before removing por-
tafilter ❿.
—17. This appliance is not intended for being used by persons (inclu-
ding children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person
responsible for their safety.
—18. Children should be supervised to ensure that they do not play
with the appliance.
—19. This appliance is intended to be used in household and similar
applications such as:
‒ staff kitchen areas in shops, offices and other working environments;
‒ farm houses;
‒ bed and breakfast type environments.
—20. Do not use outdoors.
43

Read these instructions carefully and keep it for future use. If this ap-
pliance is passed to a third party, then these instructions must be
included.
Before using the electrical appliance, some basic precautions should
always be followed including the following:
—1. Read all instructions.
—2. Before using, check the output voltage of the wall outlet should
be correspond to the rated voltage marked on the appliance’s rating
plate.
—3. To protect against fire, electric shock and injury, please do not
immerse cord and plug into water or other liquid.
—4. Unplug from wall outlet before cleaning and when it is not in use.
Allow the appliance to cool down completely before taking off, attac-
hing components or cleaning.
—5. Do not operate the appliance with damaged power cord or plug
after the equipment malfunctions, falls or operates the equipment in
any way causing damage. Return it to the nearest authorized service
for inspection, repair and electrical or mechanical adjustment.
—6. Using accessories not recommended by the manufacturer may
result in fire, electric shock or injury.
—7. Place the appliance on flat surface or table, do not hang power
cord over the edge of table or counter.
—8. Ensure the power cord not touch any hot surface of the appliance.
—9. Do not place the coffee maker on hot surface or beside fire in
order to avoid damage.
—10. To disconnect, turn off all control buttons, then unplug from
wall outlet. When unplug the appliance, always hold the plug and do
not pull the cord directly.
—11. Do not use the device for other purposes than its intended uses
and place it in a dry area.
—12. Close supervision is necessary when your appliance is being
used by or near children.
—13. Be careful not to get burned by the steam.
—14. Do not touch the hot surface of the steam wand ⓳ and filter
holder ⓫ when boiling directly. Use handle or knobs.
—15. Connect plug to wall outlet before using and turn all buttons off
before the plug being removed from wall outlet.
—16. Relieve pressure through steam wand ⓳ before removing por-
tafilter ❿.
—17. This appliance is not intended for being used by persons (inclu-
ding children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person
responsible for their safety.
—18. Children should be supervised to ensure that they do not play
with the appliance.
—19. This appliance is intended to be used in household and similar
applications such as:
‒ staff kitchen areas in shops, offices and other working environments;
‒ farm houses;
‒ bed and breakfast type environments.
—20. Do not use outdoors.
43

—21. Do not place on or near a hot gas or electric burner, or in a heated
oven.
the countertop or desktop, so as not to be pulled by children or
trip over accidentally;
For a better taste and good for your health, we suggest you to rinse
the machine and release the water out.
a) A short power-supply cord (or detachable power-supply cord) is
provided to reduce the risk of entanglement or tripping over a long
cord.
b) Longer detachable power-supply cords or extension cords are
available and may be used if care is exercised in their use.
c) If a longer detachable power-supply cord or extension cord is used:
1) The marked electrical rating of the cord set or extension cord
should be at least as large as the electrical rating of the appliance;
2) The power cord should be arranged so that it will not dangle on
65
This appliance has a polarized plug (one blade is wider than the other).
To reduce the risk of electric shock, this plug is intended to fit into a
polarized outlet in only one way. If the plug does not fit fully into the
outlet, reverse the plug. If it still does not fit, contact a qualified ele-
ctrician. Do not attempt to modify the plug in any way.
4. CORD & PLUG INSTRUCTION
5. MAIN OPERATION FUNCTION INSTRUCTION
4.1 SPECIAL NOTES ON PLUG
5.1BEFORE FIRST USE OR A LONG TIME NOT USE
4.2 SHORT CORD INSTRUCTION
(1) Remove the tape on the water tank ⓰
valve.
(2) Fill the water tank ⓰ with clean, room
temperature water. NOT exceed the “MAX”
line.
(3) Close the tank cover ⓯, and put the water
tank ⓰ on the back of coffee maker.

—21. Do not place on or near a hot gas or electric burner, or in a heated
oven.
the countertop or desktop, so as not to be pulled by children or
trip over accidentally;
For a better taste and good for your health, we suggest you to rinse
the machine and release the water out.
a) A short power-supply cord (or detachable power-supply cord) is
provided to reduce the risk of entanglement or tripping over a long
cord.
b) Longer detachable power-supply cords or extension cords are
available and may be used if care is exercised in their use.
c) If a longer detachable power-supply cord or extension cord is used:
1) The marked electrical rating of the cord set or extension cord
should be at least as large as the electrical rating of the appliance;
2) The power cord should be arranged so that it will not dangle on
65
This appliance has a polarized plug (one blade is wider than the other).
To reduce the risk of electric shock, this plug is intended to fit into a
polarized outlet in only one way. If the plug does not fit fully into the
outlet, reverse the plug. If it still does not fit, contact a qualified ele-
ctrician. Do not attempt to modify the plug in any way.
4. CORD & PLUG INSTRUCTION
5. MAIN OPERATION FUNCTION INSTRUCTION
4.1 SPECIAL NOTES ON PLUG
5.1BEFORE FIRST USE OR A LONG TIME NOT USE
4.2 SHORT CORD INSTRUCTION
(1) Remove the tape on the water tank ⓰
valve.
(2) Fill the water tank ⓰ with clean, room
temperature water. NOT exceed the “MAX”
line.
(3) Close the tank cover ⓯, and put the water
tank ⓰ on the back of coffee maker.

87
Note: The appliance is not equipped with any jug, please
use your jug or coffee cup.
Note: Set up the water tank ⓰ vertically and align the
buckles to the hole on the back of the machine, and press
it down to be parallel to the top of the machine.
(10) Press the BREWING ESPRESSO button
❷, the making espresso indicator ❼ will be
illuminated green. Wait for a moment, the
water will flow out. Press the BREWING
ESPRESSO button ❷ again to stop.
(11) Press MILK FROTHING button ❸. Wait
until the steam function indicator ⓴ is illu-
minated green.
(8) Press the ON/OFF button ❶. The power
indicator ❹ is illuminated red. Other indica-
tors do not light up. The appliance will start
heating.
(9) When the appliance finished heating,
espresso function indicator ❺ illuminated
green and the appliance pass to ready
condition
(4) Fix filter into portafilter ❿ (no coffee pow-
der in portafilter ❿). Insert the portafilter ❿
into the appliance in the flat position and turn
from the “INSERT” position to “LOCK” position.
(5) Place a cup on cup shelf ⓬.
(6) Make sure the steam control knob ⓱ is in
START/STOP position.
(7) Plug in.
(12) Move the cup under the steam wand
⓳. Turn on the steam control knob ⓱ to
the steam icon for 10 seconds, there will be
water coming out from the steam wand ⓳.
Be careful of the hot steam. Then turn the steam control knob ⓱ back
to the “START/STOP” position and and reset MILK FROTHING button
❸. Pour away the water on the cup.
30
100
180
30
100
180
30
100
180
30
100
180

87
Note: The appliance is not equipped with any jug, please
use your jug or coffee cup.
Note: Set up the water tank ⓰ vertically and align the
buckles to the hole on the back of the machine, and press
it down to be parallel to the top of the machine.
(10) Press the BREWING ESPRESSO button
❷, the making espresso indicator ❼ will be
illuminated green. Wait for a moment, the
water will flow out. Press the BREWING
ESPRESSO button ❷ again to stop.
(11) Press MILK FROTHING button ❸. Wait
until the steam function indicator ⓴ is illu-
minated green.
(8) Press the ON/OFF button ❶. The power
indicator ❹ is illuminated red. Other indica-
tors do not light up. The appliance will start
heating.
(9) When the appliance finished heating,
espresso function indicator ❺ illuminated
green and the appliance pass to ready
condition
(4) Fix filter into portafilter ❿ (no coffee pow-
der in portafilter ❿). Insert the portafilter ❿
into the appliance in the flat position and turn
from the “INSERT” position to “LOCK” position.
(5) Place a cup on cup shelf ⓬.
(6) Make sure the steam control knob ⓱ is in
START/STOP position.
(7) Plug in.
(12) Move the cup under the steam wand
⓳. Turn on the steam control knob ⓱ to
the steam icon for 10 seconds, there will be
water coming out from the steam wand ⓳.
Be careful of the hot steam. Then turn the steam control knob ⓱ back
to the “START/STOP” position and and reset MILK FROTHING button
❸. Pour away the water on the cup.
30
100
180
30
100
180
30
100
180
30
100
180

109
To make a good Espresso, we recommend that you use cup warming
plate ⓮ to preheat all the parts, like portafilter ❿, double-cup filter
❾ and your cup, so you can better enjoy the taste flavour of your coffee.
Note:There may be noise when pumping the water on the
first time, it is normal, the appliance is releasing the air inside.
After about 20s, the noise will disappear. We recommend to
release some water before brewing coffee at the first time or
when you don ’t use the appliance for a long time.
Note: The appliance is not equipped with any jug, please
use your jug or coffee cup.
Note: A spoon of flat coffee powder
is approximately equal to 7g. Collect
the coffee powder with the spoon and
shake it gently to make the surface flat,
the amount of coffee powder is around
7g. One spoon coffee powder (7g) can make one cup of top-
grade coffee, while two spoons (14g) is two cups of top-grade
coffee. Tamp the coffee powder gently below the the MAX line
of portafilter ❿ . Don’t tamp the coffee powder too firmly.
5.2 HOW TO MAKE ESPRESSO
(3) Insert the portafilter ❿ into the appliance
in the flat position and turn from the “INSERT”
position to “LOCK” position.
(4) Place espresso cup on cup shelf ⓬.
(5) Make sure the steam control knob ⓱ is in
START/STOP position.
(6) Plug in.
（1） Fill the water tank ⓰ with clean, room
temperature water in the coffee maker. NOT
exceed the “MAX” line. (If you had operated
the machine just now, skip this step)
（2）Fix double-cup filter ❾ into portafilter ❿,
make sure the dot on the filter aligns with
groove in the portafilter ❿ , and add coffee
powder to double-cup filter ❾ with the
spoon & tamper ⓴.

109
To make a good Espresso, we recommend that you use cup warming
plate ⓮ to preheat all the parts, like portafilter ❿, double-cup filter
❾ and your cup, so you can better enjoy the taste flavour of your coffee.
Note:There may be noise when pumping the water on the
first time, it is normal, the appliance is releasing the air inside.
After about 20s, the noise will disappear. We recommend to
release some water before brewing coffee at the first time or
when you don ’t use the appliance for a long time.
Note: The appliance is not equipped with any jug, please
use your jug or coffee cup.
Note: A spoon of flat coffee powder
is approximately equal to 7g. Collect
the coffee powder with the spoon and
shake it gently to make the surface flat,
the amount of coffee powder is around
7g. One spoon coffee powder (7g) can make one cup of top-
grade coffee, while two spoons (14g) is two cups of top-grade
coffee. Tamp the coffee powder gently below the the MAX line
of portafilter ❿ . Don’t tamp the coffee powder too firmly.
5.2 HOW TO MAKE ESPRESSO
(3) Insert the portafilter ❿ into the appliance
in the flat position and turn from the “INSERT”
position to “LOCK” position.
(4) Place espresso cup on cup shelf ⓬.
(5) Make sure the steam control knob ⓱ is in
START/STOP position.
(6) Plug in.
（1） Fill the water tank ⓰ with clean, room
temperature water in the coffee maker. NOT
exceed the “MAX” line. (If you had operated
the machine just now, skip this step)
（2）Fix double-cup filter ❾ into portafilter ❿,
make sure the dot on the filter aligns with
groove in the portafilter ❿ , and add coffee
powder to double-cup filter ❾ with the
spoon & tamper ⓴.

1211
(1). When the machine starts to work, there will be some noise comes
out from the machine as it is pumping the water with a high pressure.
(2). While during operation , if there is suddenly a loud noise from the
machine, which may due to not enough water in the water tank ⓰ for
pumping.
(3) To achieve a full flavor, each one cup of espresso should be not
more than 30mL, while two cups of espresso is 60mL.
(4) During brewing, when you find the the coffee leaks out from outer
side of portafilter ❿ or doesn ’t flow smoothly, it have several reasons
as below and you should stop the operation by resetting the BREWING
ESPRESSO button ❷. Remove the portafilter ❿ and clean the coffee
powder and don't use the inside coffee powder again.
1.There is some coffee powder on
the edge of portafilter ❿.
Clean coffee powder on the edge
of the portafilter ❿.
2. The portafilter ❿ is not installed
properly.
Re-install the portafilter ❿
correctly.
3. The coffee powder is too fine. Do not use coffee powder that
is too fine.
4. The coffee powder on the porta-
filter ❿ is pressed too tightly.
5. The two outlet holes of the
portafilter ❿ is blocked.
6. The holes of the filter is blocked.
Press the coffee powder lightly
to the max line.
Remove the filter and clean the
two outlet holes under the port-
afilter ❿.
Soak the filter in clean water for
about half an hour, then clean it
with a brush..
(7) Press the ON/OFF button ❶ . The power
indicator ❹ is illuminated red. Other indica-
tors do not light up. The appliance will start
heating.
（8） When the appliance finished heating,
espresso function indicator ❺ illuminated
green and the appliance pass to ready co-
ndition.
（9） Press the BREWING ESPRESSO button
❷, the making espresso indicator ❼ will be
illuminated green. After a while, coffee will
flow out.
（10）After your desired amount of espresso
is reached, press BREWING ESPRESSO button
❷ again to stop brewing. Take away the cup,
and your Espresso is ready now.
5.2.1 TROUBLESHOOTING DURING THE BREWING
Possible Cause Solution
Safety advise: If during the coffee
brew, you rotate the steam control
knob ⓱ to steam icon, the appliance
will stop to brew but from the steam
30
100
180
30
100
180
30
100
180
30
100
180

1211
(1). When the machine starts to work, there will be some noise comes
out from the machine as it is pumping the water with a high pressure.
(2). While during operation , if there is suddenly a loud noise from the
machine, which may due to not enough water in the water tank ⓰ for
pumping.
(3) To achieve a full flavor, each one cup of espresso should be not
more than 30mL, while two cups of espresso is 60mL.
(4) During brewing, when you find the the coffee leaks out from outer
side of portafilter ❿ or doesn ’t flow smoothly, it have several reasons
as below and you should stop the operation by resetting the BREWING
ESPRESSO button ❷. Remove the portafilter ❿ and clean the coffee
powder and don't use the inside coffee powder again.
1.There is some coffee powder on
the edge of portafilter ❿.
Clean coffee powder on the edge
of the portafilter ❿.
2. The portafilter ❿ is not installed
properly.
Re-install the portafilter ❿
correctly.
3. The coffee powder is too fine. Do not use coffee powder that
is too fine.
4. The coffee powder on the porta-
filter ❿ is pressed too tightly.
5. The two outlet holes of the
portafilter ❿ is blocked.
6. The holes of the filter is blocked.
Press the coffee powder lightly
to the max line.
Remove the filter and clean the
two outlet holes under the port-
afilter ❿.
Soak the filter in clean water for
about half an hour, then clean it
with a brush..
(7) Press the ON/OFF button ❶ . The power
indicator ❹ is illuminated red. Other indica-
tors do not light up. The appliance will start
heating.
（8） When the appliance finished heating,
espresso function indicator ❺ illuminated
green and the appliance pass to ready co-
ndition.
（9） Press the BREWING ESPRESSO button
❷, the making espresso indicator ❼ will be
illuminated green. After a while, coffee will
flow out.
（10）After your desired amount of espresso
is reached, press BREWING ESPRESSO button
❷ again to stop brewing. Take away the cup,
and your Espresso is ready now.
5.2.1 TROUBLESHOOTING DURING THE BREWING
Possible Cause Solution
Safety advise: If during the coffee
brew, you rotate the steam control
knob ⓱ to steam icon, the appliance
will stop to brew but from the steam
30
100
180
30
100
180
30
100
180
30
100
180

1413
（3）Press BREWING ESPRESSO button ❷
again to stop brewing. Then rinse the seal
ring of the water outlet with cloth.
（1）Uninstall the portafilter ⓯ in parallel from
the coffee outlet from the direction of "Lock"
to "Insert", then put it down. Pour away the
coffee powder.
（2）Press the BREWING ESPRESSO button ❷,
the making espresso indicator ❼ will be illu-
minated. The water will come out and flush
out the coffee powder inside.
（1） Press MILK FROTHING button ❸ from
the ready mode. When the steam function
indicator ❻ is illuminated green, it means
the heating for steam is finished.
(Never skip to next step before steam function indicator ❻ is illum-
inated green.)
（2） Prepare a pitcher with about 100mL of
milk. We recommend to use whole milk
about 42-45℉.
5.2.2 HOW TO CLEAN THE SEAL RING
5.2.3 FROTH MILK AFTER BREWING ESPRESSO
icon, the appliance will stop to brew but from the steam
wand ⓳ will flow hot water. Must remember not to do this
because the hot water can burn you or people around you.
Note:(Please mind the hot water and operate carefully)
As the seal ring of the water outlet is designed to prevent from
leaking, once there is too much coffee powder left, the seal
ring will be blocked. If the seal ring is blocked, it will lead to
the espresso leakage or splash when brewing espresso. For
this reason and for healthier, we suggest you to clean it imm-
ediately with hot water from the brewing function. If it is not
cleaned in time, it will produce a bad smell.
After making the espresso through the steps above (5.2 HOW TO
MAKE ESPRESSO), you can continue to froth milk, please refer to
the following steps (5.3 HOW TO MAKE MILK FOAM).
For a better taste and good for your health, we suggest you to rinse
the pitcher and release some water out from the steam wand ⓳.
(FOR CAPPUCCINO)
5.3 HOW TO MAKE MILK FOAM
30
100
180
30
100
180

1413
（3）Press BREWING ESPRESSO button ❷
again to stop brewing. Then rinse the seal
ring of the water outlet with cloth.
（1）Uninstall the portafilter ⓯ in parallel from
the coffee outlet from the direction of "Lock"
to "Insert", then put it down. Pour away the
coffee powder.
（2）Press the BREWING ESPRESSO button ❷,
the making espresso indicator ❼ will be illu-
minated. The water will come out and flush
out the coffee powder inside.
（1） Press MILK FROTHING button ❸ from
the ready mode. When the steam function
indicator ❻ is illuminated green, it means
the heating for steam is finished.
(Never skip to next step before steam function indicator ❻ is illum-
inated green.)
（2） Prepare a pitcher with about 100mL of
milk. We recommend to use whole milk
about 42-45℉.
5.2.2 HOW TO CLEAN THE SEAL RING
5.2.3 FROTH MILK AFTER BREWING ESPRESSO
icon, the appliance will stop to brew but from the steam
wand ⓳ will flow hot water. Must remember not to do this
because the hot water can burn you or people around you.
Note:(Please mind the hot water and operate carefully)
As the seal ring of the water outlet is designed to prevent from
leaking, once there is too much coffee powder left, the seal
ring will be blocked. If the seal ring is blocked, it will lead to
the espresso leakage or splash when brewing espresso. For
this reason and for healthier, we suggest you to clean it imm-
ediately with hot water from the brewing function. If it is not
cleaned in time, it will produce a bad smell.
After making the espresso through the steps above (5.2 HOW TO
MAKE ESPRESSO), you can continue to froth milk, please refer to
the following steps (5.3 HOW TO MAKE MILK FOAM).
For a better taste and good for your health, we suggest you to rinse
the pitcher and release some water out from the steam wand ⓳.
(FOR CAPPUCCINO)
5.3 HOW TO MAKE MILK FOAM
30
100
180
30
100
180

1615
（5） Froth milk by moving vessel round from
up to down.
（3） Place a cup on cup shelf ⓬. Turn on the
steam control knob ⓱ to the steam icon for
10 seconds, there will be water coming out
from the steam wand ⓳. Be careful of the
hot steam. Then pour away the water of the cup.
（4） Take the pitcher with milk and insert
the steam wand ⓳ into milk about 1-2cm.
Turn the steam control knob ⓱ to the steam
icon fully, steam will come out from the steam
wand ⓳.
（1） To avoid blocking the steam wand ⓳,
we suggest to clean the steam wand ⓳ im-
mediately after finish frothing milk. Press
the MILK FROTHING button ❸ and wait until
steam function indicator ❻ is illuminated.
（2）Slowly turn on steam control knob ⓱. If
the steam is weak, check whether the hole
of the steam wand ⓳ is blocked. If it is not
cleaned in time, it will produce a bad smell.
You can use a cleaning pin to clean and unblock the steam pipeline.
（3）Press and hold the steam wand ⓳, pull
out the steam wand ⓳. Clean the steam
wand ⓳ with wet sponge.
（6） After the milk increase in volume by 2
times or your required purpose is reached.
Turn the steam control knob ⓱ back to the
“START/STOP” position to stop.
（7） Take away the pitcher, and your milk
foam is ready now.
5.3.1 HOW TO CLEAN THE STEAM NOZZLE
Note: During the milk frothing, if there is suddenly a noise
from the pump or the steam become weak, please check if
there is enough water in the water tank ❻ . If the tank ⓰ is
out of water, reset the MILK FROTHING Button ❸ and turn
the steam control knob ⓱ back to the “START/STOP” position.
Press the BREWING ESPRESSO button ❷ to pump the water
to the boiler from the tank ⓰.
Note: (Please mind the hot water and operate carefully)
30
100
180

1615
（5） Froth milk by moving vessel round from
up to down.
（3） Place a cup on cup shelf ⓬. Turn on the
steam control knob ⓱ to the steam icon for
10 seconds, there will be water coming out
from the steam wand ⓳. Be careful of the
hot steam. Then pour away the water of the cup.
（4） Take the pitcher with milk and insert
the steam wand ⓳ into milk about 1-2cm.
Turn the steam control knob ⓱ to the steam
icon fully, steam will come out from the steam
wand ⓳.
（1） To avoid blocking the steam wand ⓳,
we suggest to clean the steam wand ⓳ im-
mediately after finish frothing milk. Press
the MILK FROTHING button ❸ and wait until
steam function indicator ❻ is illuminated.
（2）Slowly turn on steam control knob ⓱. If
the steam is weak, check whether the hole
of the steam wand ⓳ is blocked. If it is not
cleaned in time, it will produce a bad smell.
You can use a cleaning pin to clean and unblock the steam pipeline.
（3）Press and hold the steam wand ⓳, pull
out the steam wand ⓳. Clean the steam
wand ⓳ with wet sponge.
（6） After the milk increase in volume by 2
times or your required purpose is reached.
Turn the steam control knob ⓱ back to the
“START/STOP” position to stop.
（7） Take away the pitcher, and your milk
foam is ready now.
5.3.1 HOW TO CLEAN THE STEAM NOZZLE
Note: During the milk frothing, if there is suddenly a noise
from the pump or the steam become weak, please check if
there is enough water in the water tank ❻ . If the tank ⓰ is
out of water, reset the MILK FROTHING Button ❸ and turn
the steam control knob ⓱ back to the “START/STOP” position.
Press the BREWING ESPRESSO button ❷ to pump the water
to the boiler from the tank ⓰.
Note: (Please mind the hot water and operate carefully)
30
100
180

1817
Firstly, to reset the MILK FROTHING Button
❸.
Secondly, press the BREWING ESPRESSO
button ❷. The appliance will begin to pump
water. Place a cup on cup shelf ⓫. There will
some water flow out.
Thirdly, place a cup under the steam wand
❾ . Turn on the steam control knob ⓱ to
the steam icon for better pump the water
from the boiler quickly.
Fourthly, the steam wand ⓳ begin to flow
water out continuously, it means the boiler
in the coffee maker have enough water to
continue making milk foam. Then, turn the
knob ⓱ back to "START/STOP" to stop and reset the BREWING ES-
PRESSO button ❷ . Now you can froth milk again.（Please refer to
the 5.3 HOW TO MAKE MILK FOAM.）
After making the froth milk through the steps above (5.3 HOW TO
MAKE MILK FOAM ), the appliance ’s power indicator ❹ light keep
red fixed, other indicator’s light don’t light up. Because the temp-
erature is too high to brew coffee after milk frothing. It is necessary
to cool down the machine firstly. Then we could continue to brew
espresso. You can refer to the following steps.
（1）After you have frothed milk about 2-3
times, you have turned the steam control
knob ❹ back to the “START/STOP” position.
Maybe you will find the appliance’s steam
function indicator don’t light up and the power indicator keep red light.
Because the temperature is too low for the
steam function, we need to wait until steam
function indicator ❻ is illumanited again,
then continue to froth milk.（Please refer to
the 5.3 HOW TO MAKE MILK FOAM.）
（2） After you have frothed milk about 3-4 times, the steam will become
weaker because the boiler is run out of water and there is not enough
water for the steam function. So you need to pump the water into the
boiler.
5.3.2 TIPS FOR HOW TO CONTINUE FROTHING
5.3.3 BREW ESPRESSO AFTER MILK FROTHING (FOR LATTE)
(1)Reset the MILK FROTHING button ❸. The
appliance’s espresso function indicator ❺
light will green.
30
100
180
30
100
180
30
100
180
30
100
180
30
100
180

1817
Firstly, to reset the MILK FROTHING Button
❸.
Secondly, press the BREWING ESPRESSO
button ❷. The appliance will begin to pump
water. Place a cup on cup shelf ⓫. There will
some water flow out.
Thirdly, place a cup under the steam wand
❾ . Turn on the steam control knob ⓱ to
the steam icon for better pump the water
from the boiler quickly.
Fourthly, the steam wand ⓳ begin to flow
water out continuously, it means the boiler
in the coffee maker have enough water to
continue making milk foam. Then, turn the
knob ⓱ back to "START/STOP" to stop and reset the BREWING ES-
PRESSO button ❷ . Now you can froth milk again.（Please refer to
the 5.3 HOW TO MAKE MILK FOAM.）
After making the froth milk through the steps above (5.3 HOW TO
MAKE MILK FOAM ), the appliance ’s power indicator ❹ light keep
red fixed, other indicator’s light don’t light up. Because the temp-
erature is too high to brew coffee after milk frothing. It is necessary
to cool down the machine firstly. Then we could continue to brew
espresso. You can refer to the following steps.
（1）After you have frothed milk about 2-3
times, you have turned the steam control
knob ❹ back to the “START/STOP” position.
Maybe you will find the appliance’s steam
function indicator don’t light up and the power indicator keep red light.
Because the temperature is too low for the
steam function, we need to wait until steam
function indicator ❻ is illumanited again,
then continue to froth milk.（Please refer to
the 5.3 HOW TO MAKE MILK FOAM.）
（2） After you have frothed milk about 3-4 times, the steam will become
weaker because the boiler is run out of water and there is not enough
water for the steam function. So you need to pump the water into the
boiler.
5.3.2 TIPS FOR HOW TO CONTINUE FROTHING
5.3.3 BREW ESPRESSO AFTER MILK FROTHING (FOR LATTE)
(1)Reset the MILK FROTHING button ❸. The
appliance’s espresso function indicator ❺
light will green.
30
100
180
30
100
180
30
100
180
30
100
180
30
100
180

2019
To make sure your appliance operate efficiently, and internal piping
clean and the peak flavor of the coffee, you should clean away the
mineral deposits left every 2-3 months.
（2）Place a cup on cup shelf ⓬. Press the
BREWING ESPRESSO button ❷ to pump the
water into the boiler, which will cool down
the water temperature. At this time, the
espresso function indicator ❺ and making espresso indicator ❼
start to flash green light slowly.
（3）Wait until the steam function indicator ❻
be extinguished and remains the espresso
function indicator ❺ keep green light fixed.
（4） After that, you can continue to brew espresso refer to “5.2 HOW TO
MAKE ESPRESSO ” steps 2-3-4-5-6-7-8-9-10.
(1) A clean coffee maker is essential for making great-taste coffee. Clean
all the accessories each time and clean the coffee maker ’s water scale
regularly as specified in the “REMOVING MINERAL DEPOSITS” section.
(2) Clean the seal ring of the filter holder ⓫ each time immediately with
hot water using the brewing function after making coffee.
(1) Pour a 50/50 mixture of white vinegar and
cold tap water into the water tank ⓰.
(2) Insert the portafilter ❿ into the appliance
in the flat position and turn from the “INSERT”
position to “LOCK” position. (without coffee
powder in it) and put the jug in place.
(3) Press the ON/OFF button ❶ . The power
indicator ❹ is illuminated red. Other indicators
do not light up. The appliance will start heating.
6. CLEANING AND MAINTENANCE
6.1 DAILY TIPS FOR CLEANING AND MAINTENANCE
6.2 REMOVING MINERAL DEPOSITS
CAUTION: Be sure to unplug this appliance before cleaning
and let the appliance cool down completely. To protect
against electrical shock, do not immerse cord, plug or unit
in water or liquid.
Note: Do not use detergent or stainless steel scrubber/
brush to clean the portafilter ❿, because the surface of
the portafilter ❿ is coated, and the detergent/brush will
accelerate the oxidation of the portafilter ❿ surface.
Therefore, we recommend cleaning the portafilter ❿ with
rag.
30
100
180
30
100
180
30
100
180

2019
To make sure your appliance operate efficiently, and internal piping
clean and the peak flavor of the coffee, you should clean away the
mineral deposits left every 2-3 months.
（2）Place a cup on cup shelf ⓬. Press the
BREWING ESPRESSO button ❷ to pump the
water into the boiler, which will cool down
the water temperature. At this time, the
espresso function indicator ❺ and making espresso indicator ❼
start to flash green light slowly.
（3）Wait until the steam function indicator ❻
be extinguished and remains the espresso
function indicator ❺ keep green light fixed.
（4） After that, you can continue to brew espresso refer to “5.2 HOW TO
MAKE ESPRESSO ” steps 2-3-4-5-6-7-8-9-10.
(1) A clean coffee maker is essential for making great-taste coffee. Clean
all the accessories each time and clean the coffee maker ’s water scale
regularly as specified in the “REMOVING MINERAL DEPOSITS” section.
(2) Clean the seal ring of the filter holder ⓫ each time immediately with
hot water using the brewing function after making coffee.
(1) Pour a 50/50 mixture of white vinegar and
cold tap water into the water tank ⓰.
(2) Insert the portafilter ❿ into the appliance
in the flat position and turn from the “INSERT”
position to “LOCK” position. (without coffee
powder in it) and put the jug in place.
(3) Press the ON/OFF button ❶ . The power
indicator ❹ is illuminated red. Other indicators
do not light up. The appliance will start heating.
6. CLEANING AND MAINTENANCE
6.1 DAILY TIPS FOR CLEANING AND MAINTENANCE
6.2 REMOVING MINERAL DEPOSITS
CAUTION: Be sure to unplug this appliance before cleaning
and let the appliance cool down completely. To protect
against electrical shock, do not immerse cord, plug or unit
in water or liquid.
Note: Do not use detergent or stainless steel scrubber/
brush to clean the portafilter ❿, because the surface of
the portafilter ❿ is coated, and the detergent/brush will
accelerate the oxidation of the portafilter ❿ surface.
Therefore, we recommend cleaning the portafilter ❿ with
rag.
30
100
180
30
100
180
30
100
180