Giada D612 User manual

- 1 -

- 2 -
Statement
The copyright of this manual belongs to Shenzhen JIEHE Technology Development Co., Ltd.
(Giada, JIEHE’s global brand) and all rights are reserved. The company reserves the right to
change this manual at any time without notification. Specifications here are for reference only,
please take the real product as standard.
Without official authorization of Giada, other company or individual may not copy, plagiarize,
translate or disseminate this manual for commercial purpose.
The information provided in this manual is accurate and reliable. The company does not take
any legal responsibility for the consequences of infringement use of this manual.
Safety Notice
• Read the user manual carefully before setting up the Giada product.
• Disconnect the power cord before installing the internal components
• Most electronic components are sensitive to static electrical charge, please wear a
wrist-grounding strap when installing the internal components.
• Don’t disconnect the power cord when the system is running to avoid damage to the
sensitive components caused by instantaneous surge voltage.
Contact Information
Shenzhen JIEHE Technology Development Co., Ltd.
Website: www.giadatech.com
Phone: [phone]
Email: [e-mail]
Address: 1~2/F, Block A, Tsinghua Information Harbor, North Section, Shenzhen Hi-tech
Park, Nanshan District, Shenzhen, China

- 3 -
Table of Contents
1. Product Introduction ........................................................................................ 5
2. Interface Description and Hardware Specifications ...................................... 5
2.1 Interface Description .................................................................................... 5
2.2 Hardware Specifications ............................................................................... 6
3. Accessories Installation Steps ........................................................................... 8
3.1 Memory Installation ....................................................................................... 9
3.2 SIM Card Installation ..................................................................................... 9
3.3 3G/4G/5G Installation .................................................................................. 10
3.4 SSD(M.2) Installation .................................................................................. 11
3.5 WIFI(M.2) Installation ................................................................................. 12
4. BIOS Setup ...................................................................................................... 13
4.1 Main (Standard CMOS) Setup .................................................................... 16
4.2 Advanced BIOS Setup ................................................................................ 17
4.2.1 ACPI Setup ........................................................................................ 17
4.2.2 CPU Configuration ............................................................................ 18
4.2.3 Wake Computing ................................................................................ 20
4.2.4 Trusted Computing .................................................. .......................... 22
4.2.5 IT8613 Super IO Configuration ......................................................... 24

- 4 -
4.2.6 HW Monitor & Smart fan .................................................................. 25
4.2.7 System Devices Configuration ........................................................... 27
4.3 Security Setup ............................................................................................. 29
4.4 Boot Menu.................................................................................................... 30
4.5 Save & Exit ................................................................................................. 32
4.6 MEBx .......................................................................................................... 33
5. JAHC Introduction ......................................................................................... 33
5.1 Auto Power on ............................................................................................. 34
5.2 JAHC Software ........................................................................................... 36
5.2.1 JAHC Software Functions ................................................................. 36
5.2.2 JAHC Software Installation Guide .................................................... 36
5.2.3 Startup and Shutdown Time Setup ..................................................... 39
5.3 Watchdog API and Instruction .................................................................... 41

- 5 -
1. Product Introduction
Based on Intel®Alder Lake platform, Giada D612 adopts DDR4 dual-channel memory as well as
M.2 interface for NVMe SSD storage expansion. With four HDMI display outputs, it supports 4K
resolution. WIFI 6, 5G mobile network and TPM2.0 are supported. The player is suitable to be
applied in high-end digital signage applications.
2. Interface Description and Hardware Specifications
2.1 Interface Description
Front I/O Port
Left I/O Port

- 6 -
Rear I/O Port
Right I/O port
2.2 Hardware Specifications
D612
D612-1215U40N0G-GIA
D612-1235U40N0G-GIA
Processor
CPU
Intel Core i3-1215U
Intel Core i5-1235U
E-Core Frequency
3.30 GHz
3.30 GHz
P-Core Frequency
4.40 GHz
4.40 GHz
BIOS
AMI Source Code
Chipset
SOC
Memory
Type
DDR4-3200 MHz
Socket
2 x SO-DIMM
Max Capacity
64 GB
Graphics
GPU
Intel® UHD Graphics (Core i3)
Intel® Iris® Xe Graphics (Core i5)
Graphic
Engine
DirectX 12.1, OpenGL 4.6, OpenCL 3.0,
8K 60fps 12b 4:2:0 HEVC/VP9/SCC
HDMI2.0
4 x HDMI (Max.4096 x 2304 @60 Hz)

- 7 -
Network
Controller
1 x Intel® i219LM Gigabit Ethernet
Interface
1 x RJ45
I/O Interface
USB
1 x USB Type-C3.2 Gen2, 1 x USB3.2 Gen2, 2 x USB2.0
Serial Port
1 x RS232
Audio
1 x 2-in-1 Headset (MIC-IN & AUDIO-OUT)
M.2 (2230)
1 x E-Key (2230) for Wi-Fi/BT Support Wi-Fi 5, Wi-Fi 6, Wi-Fi 6E (CNVi)
SIM
1 x SIM Slot
M.2 (3042/3052)
1 x B-Key M.2 (3042/3052) for 3G/4G/5G
Storage
M.2 (2280)
1 x M-Key M.2 (2280) for PCIe SSD
JAHC
JAHC
Watchdog / Auto power on/ RTC
Operation
System
OS
Windows 10-1909 (64bit)
Windows 11 (64bit) /Linux Ubuntu (64bit)
Power
Power Type
DC-IN
Input Voltage
19V/3.42A
Mechanical
Construction
Metal
Mounting
VESA Mounting Kit (JZ183)
Dimension
(W x D x H)
189.6mm x 148.3mm x 26mm (7.46” x 5.83” x 1.02”)
Color
Black
Environment
Operating
Temperature
0°C ~45°C (32°F~113°F) @0.7m/s Air Flow
Relative
Humidity
95%@40℃(non-condensing)
Certification
CE, FCC Class B, UKCA

- 8 -
3. Accessories Installation Steps
For safety reasons, please ensure that the power cord is disconnected before opening the case.
How to open the top cover and bottom cover
Unscrew the four screws and remove the top cover. (SO-DIMM, M.2 slot for 3G/4G/5G and SIM
card slot are on top side)
Unscrew the four screws, push the bottom cover and remove it. (M.2 for SSD and M.2 for WIFI are
on bottom side)

- 9 -
3.1 Memory Installation
This product only supports DDR4 SO-DIMM memory modules.
1. Locate the SO-DIMM slot on the board.
2. Gently insert the module into the slot in a 45-degree angle.
3. Carefully push down the memory module until it snaps into the locking mechanism.
3.2 SIM Card Installation
This product supports standard SIM card with the size of 25mm × 15mm.
1. [Open] the SIM card holder and pull it up.
2. Insert the SIM card.
3. [Lock] the card holder.

- 10 -
3.3 3G/4G/5G Installation
3G/4G/5G Installation
Default SMA connector and cable is for WIFI. Please change to 3G/4G/5G SMA connector and cable.
Default standoff screw located in MH1 is suitable for 3G/4G module in M.2 3042 form factor. If need to
install 5G module in M.2 3052 form factor, please unscrew the standoff screw and fix it in MH2 location.
1. Plug the 3G/4G/5G module into the M.2 slot.
2. Secure the module to the standoff screw by tightening up the screw.
3. Connect the cable to Main and install the antenna.