Glide Gear FACE-2-FACE User manual

FACE-2-FACE Periscope Teleprompter
USER MANUAL
For more informaon please visit our website: www.glidegear.net
Periscope Setup Teleprompter Setup

Periscope Setup
 Compable with any DSLR cameras.
 Adjust the distance between the beam splier glass and the
camera to accommodate most of the lenses.
For beer results:
 Adjust the height of the camera to be leveled with the eyes
of the interviewee.
 Mount LED light facing the interviewee and the interviewer
on top of the teleprompter
The Face-2-Face Teleprompter can be used as:
 A classic teleprompter: look straight at the camera and read the text reected on the beam splier glass.
Use this conguraon to get your classic news anchor shot.
 A Periscope teleprompter: look straight the camera while looking straight at the person talking to you.
Use this conguraon to get a direct connecon between the interviewee and the interviewer and achieve a very strong per-
sonal eect between the viewers and the person on screen.
FACE-2-FACE CONFIGURATIONS
Teleprompter Setup
 Compable with any smart phones
 Compable with tablet with a width no greater than 18
cm or 7’’
 3 m or 10  reading range
 Cover the camera with the supplied black cloth for a more
visible reecon on the beam splier glass.
WARNING: When the Face-2-Face is mounted on a tripod, we recommend using a tripod rated for a minimum capacity of 25
lbs or 12 kg

FACE-2-FACE ASSEMBLY
Prior to using the Face-2-Face Prompter, you will need to assemble the
beam splier glass on the main frame.
To do so:
1Slide the beam splier glass into the frame through the
opening on the opposite side of the camera.
Warning: The beam splier glass needs to be in the
correct orientaon. The yellow scker on the glass
frame needs to be facing the camera.
2
1
Use the 2 supplied thumb screws to
lock the beam splier glass in place to
the top of the Face-2-Face.
2

PERISCOPE CONFIGURATION
Interviewee
Interviewer
Mounng holes for:
 Microphones,
 Lights,
 Accessories..etc
CAMERA
Mirror
Overall Layout
Beam Splier Glass

PERISCOPE CONFIGURATION
1
2
Inter-
viewee
 Insert the rails into the clamp already
mounted at the boom of the tele-
prompter.
 Mount the riser onto the rails.
 Use the riser the move your camera
back and forward.
 Mount your camera onto the riser
plate.
 Adjust the height of the rise so
that you camera lens is aligned
with the interviewee’s eyes.
Clamp
Height adjustment
Riser

TELEPROMPTER CONFIGURATION
Speaker
Mounng holes for:
 Microphones,
 Lights,
 Accessories..etc
CAMERA
Mirror
Tablet/Cellphone
Insert your tablet or cell-
phone in the slot with
the screen facing the di-
recon in which the ar-
row is poinng.
Overall Layout
Beam Splier Glass

TELEPROMPTER CONFIGURATION
Cellphone Tablet
When using a tablet:
 Insert the tablet in a portrait through the slot on
the top of the teleprompter.
 The tablet must be facing the beam splier glass.
When using a cellphone:
 Place cellphone in a portrait or landscape orienta-
on in the supplied holder.
 Insert the holder through the slot on the top of the
teleprompter.
 The Phone must be facing the beam splier glass.