GMG 1330-ED User manual
SERVICE MANUAL
1330, 1530-ED
Part # 81301.2
October 1, 2021
Serial # Range
2133001073-Current
2153001119-Current
Global Machinery Group, Inc.
7
Please refer to the website (www.
g
o
g
m
g
.com) for
contact information, other serial numbers, the most
recent technical manuals, and USB software.
L
1330
ED
& 1
5
30
ED
mic
GMG
3
@ Notes
4
1330
E
D & 1
5
30
E
D mic
GMG
Table of Contents
Section 1 -Scheduled Maintenance ........................................... 7
Section 2 -Maintenance Tables and Diagrams ................................. 25
5
1330
E
D & 1
5
30
E
D mic
GMG
1330
E
D & 1
5
30
E
D mic
GMG
Section 1 - Scheduled Maintenance
1.1 Read and Heed
1.1-1 Mobile Elevating Work Platform
{MEWP) definition
1.1-2 Purpose of Equipment
1.1-3 Use of Equipment
1.1-4 Service Policy and Warranty
1.1-5 Ownership of MEWP
1330
ED
& 1
5
30
ED
mic
GMG
1.1-6 Optional equipment
opetion manual
7
1.2 Maintenance and
Inspection Schedule
1.2-1 Owner's Annual Inspection Record
1.2-2 Replacement Parts
G
G
WARNING
Any unit that is damaged or not operating properly
must be immediately tagged and removed from
service until proper repairs are completed.
8
Matenance and Inspection Schedule
1.2-3 Maintenance and Service Safety
Tips
MEW
1330
E
D & 1
5
30
E
D mic
GMG
Maintenance and Inspection Schedule
1.2-4 Hydraulic System & Component
Maintenance and Repair
WARNING
Escaping fluid from a hydraulic pressure leak can
damage your eyes, penetrate the skin and cause
serious injury. Use proper personal protection at
all times.
Section 1 - Scheduled Maintenance
9
1330
E
D & 1
5
30
E
D mic
GMG
Section 1 - Scheduled Maintenance
1.2-5 Maintenance Hints
10
Matenance and Inspection Schedule
1330
E
D & 1
5
30
E
D mic
GMG
Maintenance and Inspection Schedule
1.2-6 About this Section
Seice Bulletins
gmg
Maintenance and Inspection
MEW
WARNING
@NOTE
Section 1 - Scheduled Maintenance
1.2-7 Maintenance Instructions
B
*
p
N/A
11
1330
E
D & 1
5
30
E
D mic
GMG
Table 1.3 Owner's Annual Inspection Record
Do not use the MEWP if there is no inspection
recorded in the last 13 months. If you do not obey,
there is a risk of death or serious injury.
The owner's annual inspection record is located on
the scissor assembly. It must be filled out aer an
annual inspection has been completed. Do not use
the MEWP if an inspection has not been recorded
in the last 13 months.
12
Oer's Annual Inspection Record
1330
E
D & 1
5
30
E
D mic
GMG
Section 1 - Scheduled Maintenance
1.4 Frequent/Periodic/Annual/Pre-Delivery Inspection Checklist
GMG
5
,.
,.
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
13
1330
E
D & 1
5
30
E
D mic
GMG
Section 1 - Scheduled Maintenance
1.5 General inspections
Do an inspection of the MEWP in this sequence:
General inspecons
1.5-1 Service Bulletins (B)
Go to .gogmg.com and use your machine's
serial number to find related open service bulletins.
1.5-2 Annual Inspections (B)
Do a check on the machine's seice record to find
information about previous service performed.
1.5-3 Labels (B)
Refer to the operation manual for the labels. Make
sure all the labels are in the correct location, are in
good condition, and you can read them.
1.5-4 Pothole protection limit
switches (B)
Make sure the 0
are correctly attached, there is no visible damage,
and the movement is not blocked.
1330
E
D & 1
5
30
E
D mic
GMG
14
Base inspection
0
0
e
1.6 Base inspection
O
WARNING
G
G
G
G
Section 1 - Scheduled Maintenance
■
■
■
■
■
■
1330
E
D & 1
5
30
E
D mic
GMG
15
Section 1 - Scheduled Maintenance
Steer cylinder (B)
■Make sure that the steer cylinder assembly is
correctly installed.
■Make sure there are no loose or missing
fasteners.
■Make sure there is no visible damage.
Steer linkages assembly (B)
■Make sure there are no loose or missing
fasteners and lock-pins.
■Make sure that the steer linkages and
bushings are correctly attached.
■Make sure there is no visible damage.
Grease points (B)
■Make sure there is no visible damage.
■Add grease if necessary.
Base inspecon
1330
E
D & 1
5
30
E
D mic
GMG
16
Base inspection
1.6-1 System components tray
Section 1 - Scheduled Maintenance
■
■
■
■
1330
E
D & 1
5
30
E
D mic
GMG
17
Section 1 - Scheduled Maintenance
·-
Hydraulic pump and motor (B)
Hydraulic oil level (B, C)
■B - Frequent/periodic/pre-delivery inspection
■C - Annual inspection
Electrical components (B)
Base inspecon
Motor controller (B)
1330
E
D & 1
5
30
E
D mic
GMG
18
Li mechanism specon
1. 7 Li mechanism inspection
■
0
■
■
8
■
■
Section 1 - Scheduled Maintenance
■
■
■
■
■
■
■
19
1330
E
D & 1
5
30
E
D mic
GMG
Section 1 - Scheduled Maintenance
0 Scissor pin inspection (B)
ARNING
Units that show signs of damage must be
immediately removed from service and repaired
by a qualified technician. Speak to the
GMG
service depament for directions on how to repair
the unit.
20
Li mechanm inspecon
Examples of pivot pin connections with no
damage:
1330
E
D & 1
5
30
E
D mic
GMG
Other manuals for 1330-ED
2
This manual suits for next models
1
Table of contents
Other GMG Scissor Lift manuals
Popular Scissor Lift manuals by other brands
Rotary
Rotary S50 operation & maintenance
ALMAC
ALMAC BiBi 850 HE Use and maintenance manual
Molnar
Molnar SM300 installation instructions
AMGO Hydraulics
AMGO Hydraulics AX-16A Installation and service manual
WERTHER INTERNATIONAL
WERTHER INTERNATIONAL SATURNUS 40R Instruction and maintenance manual
KROFtools
KROFtools 9831 user manual