Godox LC500R User manual

INSTRUCTION MANUAL
RGBLED
RGB LED Light Stick
Made in China

:2
:0755-29609320(8062):0755-25723423:[e-mail]
godox.com
Add: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao’an District,
Shenzhen, China Tel: [phone](8062) Fax: [phone]
E-mail: [email protected]
GODOX Photo Equipment Co., Ltd.
705-LC50R0-03


QCPASS

Foreword
Warning
Thank you for purchasing this Godox Product!
This RGB LED Light Stick LC500R is a continuous light with high light brightness,
wireless adjustment and multiple modes. Suitable for almost all shooting occasions
e.g. live, camping, make up, portrait shooting, make up, video, wedding, children
photography, etc. It’s portable and easy to be operated.
Features:
● Freely switch LED bicolor mode, colorful light mode and 39 situational special effects
modes
● Easy to adjust color temperature, light brightness, hue and color saturation
● Blink and change colors with the rhythm of music
● With a display to clearly show the parameters
● With easy operation and wide application
Always keep this product dry. Do not use in rain or in damp conditions.
Do not disassemble. Should repairs become necessary, this product must be
sent to an authorized maintenance center.
Keep out of reach of children.
As this product do not have waterproof function, please take measures of
waterproof in rainy or damp environment.
Do not use the flash unit in the presence of flammable gases, chemicals and
other similar materials. In certain circumstance, these materials may be
sensitive to the strong light emitting from this flash unit and fire or
electromagnetic interference may result.
As this product has built-in lithium battery, do not disassemble, impact,
squeeze or put it into fire. If serious bulge occurs, please do not use. Do not
use or store the product if the ambient temperature reads over 50°C. Please
charge the product with specialized charger and correctly operate it within the
defined voltage and working temperate according to the instruction manual.
Parts
● Body
01. LED Beads
02. Handle
03. DC Power Jack
04. Bracket Mounting Hole
05. Reset Button
CH
GR FN
MOD
DIM
S:99
>H:354°100
HSI
06. Reflector
07. Control Panel
08. Power Switch
09. CH/GR Button
10. MOD Button
①
②
③
④
⑤
⑥
⑦

⑧
⑨

⑩
11. FN Multifunctional
Select Dial
12. DIM Button
13. Color Gamut
14. MIC Hole
15. LCD Panel


- 11 - - 12 -

Foreword
Warning
Thank you for purchasing this Godox Product!
This RGB LED Light Stick LC500R is a continuous light with high light brightness,
wireless adjustment and multiple modes. Suitable for almost all shooting occasions
e.g. live, camping, make up, portrait shooting, make up, video, wedding, children
photography, etc. It’s portable and easy to be operated.
Features:
● Freely switch LED bicolor mode, colorful light mode and 39 situational special effects
modes
● Easy to adjust color temperature, light brightness, hue and color saturation
● Blink and change colors with the rhythm of music
● With a display to clearly show the parameters
● With easy operation and wide application
Always keep this product dry. Do not use in rain or in damp conditions.
Do not disassemble. Should repairs become necessary, this product must be
sent to an authorized maintenance center.
Keep out of reach of children.
As this product do not have waterproof function, please take measures of
waterproof in rainy or damp environment.
Do not use the flash unit in the presence of flammable gases, chemicals and
other similar materials. In certain circumstance, these materials may be
sensitive to the strong light emitting from this flash unit and fire or
electromagnetic interference may result.
As this product has built-in lithium battery, do not disassemble, impact,
squeeze or put it into fire. If serious bulge occurs, please do not use. Do not
use or store the product if the ambient temperature reads over 50°C. Please
charge the product with specialized charger and correctly operate it within the
defined voltage and working temperate according to the instruction manual.
Parts
● Body
01. LED Beads
02. Handle
03. DC Power Jack
04. Bracket Mounting Hole
05. Reset Button
CH
GR FN
MOD
DIM
S:99
>H:354°100
HSI
06. Reflector
07. Control Panel
08. Power Switch
09. CH/GR Button
10. MOD Button
①
②
③
④
⑤
⑥
⑦

⑧
⑨

⑩
11. FN Multifunctional
Select Dial
12. DIM Button
13. Color Gamut
14. MIC Hole
15. LCD Panel


- 11 - - 12 -

LCD Panel
CCT: Bicolor Modes HSI: Colorful Light
Modes
FX: Situational
Special Effects Modes
2:
>1: I
I100
FX
3: I
S:99
>H:354 100
HSI
>2500K 100
CCT
Body *1
Included Items
1. Power Supply
With built-in Li-polymer battery which can offer about 1.5 hours’lighting in
100% brightness once got fully charged.
2. Charge
The whole charging takes about 2.5 hours. The charge indicator turns to red
in charging while green once got fully charged.
Battery Management
Attaching Reflector
Installation: Choose the side which
needs reflector and adjust the reflector’s
direction. Match the ridge in the
reflector’s handle ring with the groove on
the handle(as shown) and slip the
reflector over the LED ice light and push
in. Extend the reflector for shooting.
Detachment: Hold the handle and push
the reflector from the bottom up to
detach.
- 13 - - 14 -
Portable Bag *1
Charger(16.8V/1.2A) *1 Reflector *1

LCD Panel
CCT: Bicolor Modes HSI: Colorful Light
Modes
FX: Situational
Special Effects Modes
2:
>1: I
I100
FX
3: I
S:99
>H:354 100
HSI
>2500K 100
CCT
Body *1
Included Items
1. Power Supply
With built-in Li-polymer battery which can offer about 1.5 hours’lighting in
100% brightness once got fully charged.
2. Charge
The whole charging takes about 2.5 hours. The charge indicator turns to red
in charging while green once got fully charged.
Battery Management
Attaching Reflector
Installation: Choose the side which
needs reflector and adjust the reflector’s
direction. Match the ridge in the
reflector’s handle ring with the groove on
the handle(as shown) and slip the
reflector over the LED ice light and push
in. Extend the reflector for shooting.
Detachment: Hold the handle and push
the reflector from the bottom up to
detach.
- 13 - - 14 -
Portable Bag *1
Charger(16.8V/1.2A) *1 Reflector *1

Operation
S:99
>H:354°100
HSI
CH
GR FN
MOD
DIM
CH
GR FN
MOD
DIM
2:
>1: I
I100
FX
3: I
>2500K 100
CCT
S:99
>H:354°100
HSI
CH
GR FN
MOD
DIM
CH
GR FN
MOD
DIM
ID:99
GR:A
>CH:32
ON
CH
GR FN
MOD
DIM
CH
GR FN
MOD
DIM
ID:99
>GR:F
CH:32
ON
CH
GR FN
MOD
DIM
CH
GR FN
MOD
DIM
>ID:99
GR:F
CH:32
ON
CH
GR FN
MOD
DIM
CH
GR FN
MOD
DIM
ID:99
GR:F
CH:32
>ON
1. Setting
1.1 Power On/Off
Long press the to power on/off the LED light and the current information will
be displayed on the LCD panel.
1.2 Mode Selection: Bicolor Mode/Colorful Mode/Situational Special Effects
Mode. Press MOD button to switch different modes: CCT displayed on the
screen means bicolor mode, HIS displayed on the screen means colorful mode
and FX means situational special effects mode.
2. Wireless Remote Control
With 2.4G wireless system, this product has remote grouping and control
function. Up to 6 groups of LED light stick can be controlled. 16 channels are
available with strong anti-interference capability.
Please set the channels and groups of LED ice light to the same as those of
remote control before usage.
Channel/Group/ID Setting: Press CH/GR to enter the setting interface.
2.1 Channel setting: press the FN button to choose CH and turn the select
dial to choose channel value from 1 to 32.
2.2 Group setting: press the FN button to choose GR and turn the select dial
to choose group value from A to F.
2.3 ID setting: press the FN button to choose ID and turn the select dial to
choose ID from 1 to 99.
2.4 Turn on/off the wireless: press the FN button to choose and turn the
select dial to turn on or off the wireless.
- 15 - - 16 -
Note: Remote control purchased separately

Operation
S:99
>H:354°100
HSI
CH
GR FN
MOD
DIM
CH
GR FN
MOD
DIM
2:
>1: I
I100
FX
3: I
>2500K 100
CCT
S:99
>H:354°100
HSI
CH
GR FN
MOD
DIM
CH
GR FN
MOD
DIM
ID:99
GR:A
>CH:32
ON
CH
GR FN
MOD
DIM
CH
GR FN
MOD
DIM
ID:99
>GR:F
CH:32
ON
CH
GR FN
MOD
DIM
CH
GR FN
MOD
DIM
>ID:99
GR:F
CH:32
ON
CH
GR FN
MOD
DIM
CH
GR FN
MOD
DIM
ID:99
GR:F
CH:32
>ON
1. Setting
1.1 Power On/Off
Long press the to power on/off the LED light and the current information will
be displayed on the LCD panel.
1.2 Mode Selection: Bicolor Mode/Colorful Mode/Situational Special Effects
Mode. Press MOD button to switch different modes: CCT displayed on the
screen means bicolor mode, HIS displayed on the screen means colorful mode
and FX means situational special effects mode.
2. Wireless Remote Control
With 2.4G wireless system, this product has remote grouping and control
function. Up to 6 groups of LED light stick can be controlled. 16 channels are
available with strong anti-interference capability.
Please set the channels and groups of LED ice light to the same as those of
remote control before usage.
Channel/Group/ID Setting: Press CH/GR to enter the setting interface.
2.1 Channel setting: press the FN button to choose CH and turn the select
dial to choose channel value from 1 to 32.
2.2 Group setting: press the FN button to choose GR and turn the select dial
to choose group value from A to F.
2.3 ID setting: press the FN button to choose ID and turn the select dial to
choose ID from 1 to 99.
2.4 Turn on/off the wireless: press the FN button to choose and turn the
select dial to turn on or off the wireless.
- 15 - - 16 -
Note: Remote control purchased separately

4500K Color Temperature
Brightness
CH
GR FN
MOD
DIM
>2500K 100
CCT
>8500K 100
CCT
CH
GR FN
MOD
DIM
CH
GR FN
MOD
DIM
8500K 0
CCT
CH
GR FN
MOD
DIM
CH
GR FN
MOD
DIM
S:99
>H:360°100
HSI
CH
GR FN
MOD
DIM
CH
GR FN
MOD
DIM
>S:99
H:360°100
HSI
CH
GR FN
MOD
DIM
CH
GR FN
MOD
DIM
S:99
H:360° 0
HSI
3. Bicolor Mode
3.1 Color temperature adjustment: turn the FN multifunctional select dial to
adjust the color temperature from 2500K to 8500K.
3.2 Light brightness adjustment: press the DIM button and the brightness
value will be blinking. Turn the select dial to adjust the value from 0 to 100%.
3.3 P mode: press the FN button and P will be displayed on the LCD panel,
which means P mode. In P mode, the brightness will be change with the color
temperature and reach the maximum value when color temperature is 4500K.
In general mode, the brightness will keep the same when adjusting the color
temperature.
4. Colorful Mode
4.1 Adjust hue H: press the FN multifunction select dial and H is selected.
Turn the FN multifunctional select dial to adjust the hue from 0 to 360°.
4.2 Adjust saturation S: press the FN multifunction select dial and S is
selected. Turn the FN multifunctional select dial leftwards or rightwards to
adjust the saturation from 0 to 100.
4.3 Adjust light brightness: press the DIM button and turn the select dial to
adjust the brightness from 0~100%.
Press MOD button to enter setting interface.
- 17 - - 18 -
P
C

4500K Color Temperature
Brightness
CH
GR FN
MOD
DIM
>2500K 100
CCT
>8500K 100
CCT
CH
GR FN
MOD
DIM
CH
GR FN
MOD
DIM
8500K 0
CCT
CH
GR FN
MOD
DIM
CH
GR FN
MOD
DIM
S:99
>H:360°100
HSI
CH
GR FN
MOD
DIM
CH
GR FN
MOD
DIM
>S:99
H:360°100
HSI
CH
GR FN
MOD
DIM
CH
GR FN
MOD
DIM
S:99
H:360° 0
HSI
3. Bicolor Mode
3.1 Color temperature adjustment: turn the FN multifunctional select dial to
adjust the color temperature from 2500K to 8500K.
3.2 Light brightness adjustment: press the DIM button and the brightness
value will be blinking. Turn the select dial to adjust the value from 0 to 100%.
3.3 P mode: press the FN button and P will be displayed on the LCD panel,
which means P mode. In P mode, the brightness will be change with the color
temperature and reach the maximum value when color temperature is 4500K.
In general mode, the brightness will keep the same when adjusting the color
temperature.
4. Colorful Mode
4.1 Adjust hue H: press the FN multifunction select dial and H is selected.
Turn the FN multifunctional select dial to adjust the hue from 0 to 360°.
4.2 Adjust saturation S: press the FN multifunction select dial and S is
selected. Turn the FN multifunctional select dial leftwards or rightwards to
adjust the saturation from 0 to 100.
4.3 Adjust light brightness: press the DIM button and turn the select dial to
adjust the brightness from 0~100%.
Press MOD button to enter setting interface.
- 17 - - 18 -
P
C

* Product design and specifications are subject to change without notice.
Technical Data
Model
Built-in Lithium Battery
Power
Channel
Group
Color Temperature Range
Light Brightness Range
RGB Color Gamut
100% Light Brightness(LUX)
CRI()
TLCI()
Duration(continuous output
in 100% full power)()
Operation Temperature
Dimension (without reflector)
Net Weight (without reflector)
LC500R
14.4V/2600mAh lithium battery
Max. 23W
32
6（A B C D E F）
2500K～8500K
0%~100%
0～360°
Max. 5800
96
98
Approx. 90 minutes
-10~40 °C
616*56*56mm
0.81Kg
2:
>1: I
I100
FX
3: I
CH
GR FN
MOD
DIM
2:
>1: III
I100
FX
3: I
CH
GR FN
MOD
DIM
CH
GR FN
MOD
DIM
CH
GR FN
MOD
DIM
2:
>1: III
I 0
FX
3: I
No. Display Situation Display
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Colorful lights recycle
Flash
Laser colorful lights
Lightning
Broken bulb
TV
Candle
Fire
Firework
Police car
Fire truck
Ambulance
Music
SOS
Slow speed
Flash
Birthday party
Discontinuous
Discontinuous
Slow speed
Discontinuous
Firewood
Brief
Strong flash
Strong flash
Strong flash
Music I
Medium speed
Press conference
KTV
Frequent
Frequent
Medium speed
Frequent
Campfire
Continuous
Frequent flash
Frequent flash
Frequent flash
Music II
Quick speed
Paparazzi
Disco
Sustainable
Sustainable
Quick speed
Sustainable
Fire hazard
Show
Quick flash
Quick flash
Quick flash
5. FX Situational Special Effects Mode(39 kinds)
5.1 Turn the select dial to choose different special effects modes from 1 to 14.
And the modes will display circularly by turning the select dial.
5.2 After choosing the current mode, press down the FN multifunctional select
dial from I, II and III.And the modes will display circularly when keeping
pressing the FN multifunctional select dial.
5.3 Adjust light brightness: turn the light brightness select dial to adjust from
0 to 100%.
5.4 There’re 39 kinds of situational special effects mode which are divided into
14 categories for your choice.
Display IIIDisplay II
- 19 - - 20 -
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.