Graco TexSpray HTX 258740 User manual

TexSpray
™
HTX
™
2030
Graco’s Most Powerful and Versatile Texture Sprayer

TexSpray HTX 2030 –
Complete
Part #: 258740
TexSpray HTX 2030 –
Complete PLUS+
Part #: 258741
MAXIMUMPERFORMANCE
UNMATCHED
VERSATILITY
Texture Applications
Get the Interior and Exterior Texture Finish You Want – with Aggregate Size up to 2.5 mm!
TexSpray
HTX 2030
Complete
Part #: 258740
TexSpray
HTX 2030
Complete
PLUS+
Part #: 258741
Simulated
Acoustic
(Popcorn)
Splatter Textured
Acrylics,
Elastomerics
Knockdown Orange Peel,
Fine Splatter
Deck Coatings EIFS, Synthetic
Stucco,
Finish Coats
=
=
Skim Coat,
Level 5,
(Airless)
Primers,
Paints
(Airless)
Simulated
Acoustic
(Popcorn)
Splatter Textured
Acrylics,
Elastomerics
Knockdown Orange Peel,
Fine Splatter
Deck Coatings EIFS, Synthetic
Stucco,
Finish Coats
+

High-Output Texture Pump
Uniquely designed pump with extra large passages allows
pumping aggregated materials up to 2.5 mm
Innovative soft seal in the foot valve ensures consistent and
optimal performance
Produces delivery rates to
3.0 gpm at 1000 psi for
time-saving production rates
Easily sprays smooth and
aggregate textures, elastomerics
and acrylic materials
Exclusive PowerFlo™Control System
Innovative design remotely stops
and starts material flow right at
the pump, eliminating the need for
a downstream valve
Offers a smooth, controlled
material flow to prevent
pack-out conditions
Ensures a soft start, eliminating
the material blast that can impact
finish quality
Full-range flow control from .6
to 3 gpm
Exclusive StraightThru™Fluid Path
StraightThru design eliminates turns and corners from pump to gun
Puts less stress on material to virtually eliminate
pack-out conditions
Enables the spraying of today’s more demanding and
aggressive aggregate materials
Wide Variety of Applicators
NEW FreeFlo™Inline Gun offers
oversized, unobstructed fluid
passages to provide maximum flow
Sprays air-assisted in either a
round pattern or wide fan
pattern for fast, consistent
material coverage
New 3 ft Pole Gun* offers
extended reach to minimize
repositioning of lifts and ladders
Flex Head Pole Gun* offers
greater control in tight areas,
such as on scaffolding and
around architectural detail
Both new Pole Guns can
spray in a wide fan pattern –
an industry first!
No-tools hose connections at
pump and gun
UNMATCHED
VERSATILITY
The all new TexSpray HTX 2030 is Graco’s most
powerful and versatile texture sprayer to date. Designed
for today’s demanding exterior aggregate and smooth
coatings, the HTX 2030 offers extreme durability and
simple operation. Capable of applying exterior smooth
and aggregate textures, elastomerics, and acrylic
materials, it can also spray drywall mud in an orange
peel, splatter or knockdown finish. Combine this with
the available MaxLife™Endurance™High Pressure Pump
and you can spray a wide variety of interior and exterior
smooth materials including primers and paints.
One Machine can Complete all Your Interior
and Exterior Jobs!
FreeFlo Inline Gun
Pole Gun with Fine Finish Kit
(included with Pole Gun
Applicators; Patent Pending)
*Sold Separately
Tool-less ProConnect™ Pump
System allows you to change
pumps in seconds
Innovative system allows user to convert unit to a high
pressure airless sprayer for applying the wide range of heavier
smooth coatings including skim coat in a Level 5 finish,
primers and paints
System automatically recognizes installed pump and converts
it to an airless sprayer
One machine can complete all your interior and exterior jobs!
Allows you to upgrade your TexSpray HTX 2030-Complete to a
TexSpray HTX 2030-Complete Plus+ at any time (with the
Maxlife Endurance High-Pressure Pump Kit), to expand your
job capabilities!
Expand your capabilities and spray a
wide variety of materials
Remote on/off switch
electronically engages pump,
eliminating the need for a
gun valve
Exclusive Convert-A-Pump™System
(Included with TexSpray HTX 2030-Complete PLUS+)

GUNS
24B327 FreeFlo Inline Gun with 4, 6, 8, 10 mm Nozzles,
18 30 Mesh Filter, RAC X 671 Tip, RAC X Guard
24B944 Pole Gun 3 ft (1 m) with 6 mm, 8 mm, 9.5 mm,
11 mm, 13 mm Nozzles, Cap,
Fine Finish Adapter
24B945 Flex Head Gun with
6 mm, 8 mm, 9.5 mm,
11 mm, 13 mm Nozzles,
Cap, Fine Finish Adapter
241705 HD Blue Texture Gun
FreeFlo Inline Gun
287227 Fine Finish Kit (includes 3 mm, 6 mm, 8 mm, 9.5 mm Spray
Discs, retaining nut and adapter)
248888 3 mm Nozzle
248524 4 mm Nozzle
248525 6 mm Nozzle
248526 8 mm Nozzle
248527 10 mm Nozzle
Pole Gun and FlexHead Gun
16A443 5 mm Nozzle
16A444 6 mm Nozzle
16A445 8 mm Nozzle
16A446 9.5 mm Nozzle
16A447 11 mm Nozzle
16A448 13 mm Nozzle
16A449 14 mm Nozzle
16A420 Cap, Nozzle–Soft
16A405 Cap, Nozzle–Medium
16A421 Cap, Nozzle–Hard
16A246 Fine Finish Adapter
Hose
24B300 3/4 in x 50 ft Fluid Hose
(with Remote on/off switch)
24B326 3/4 in x 50 ft Extension Fluid Hose
convert-a-PumP KIt
24B140 MaxLife Endurance High Pressure Pump Kit
with High Pressure Lower,
HD Blue Texture Gun, 3/8 in x 50 ft Hose,
1/4 in x 3 ft Whip Hose, RAC X 643 Tip
aDDItIonaL accessorIes
287987 25 Gallon (95 L) Texture Hopper
243380 Cam-Lock Hose Adapter–Connects
Texture Hopper to the HTX 2030
High-Output Texture Pump
24C414 Ball Valve Material Shutoff Kit
119282 Cleaning Ball (25 mm)
244052 HD Blue Texture Gun Air
Atomizer Kit with Air Hose
(Minimum air compressor rating of 15 cfm at 90 psi)
244223 HD Blue Texture Gun Air Atomizer Kit without Air Hose
(Minimum air compressor rating of 15 cfm at 90 psi)
*Nozzle size requirement could vary based on material viscosity, desired finish, production rate and air settings
Call today for product information or to request a demonstration.
800.690.2894 or visit us at www.graco.com
All written and visual data contained in this document are based on the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice.
©2009 Graco Inc. Form No. 341181 Rev. A 8/09 Printed in the U.S.A.
All other brand names or marks are used for identification purposes and are trademarks of their respective owners.
HTX ACCESSORIES
NOZZLES
Nozzle Selection Guide*
Atomizer Kit shown with HD
Blue Texture Gun (not included)
TEXTURE PRODUCT SPECIFICATIONS
Nozzle
Size
Exterior
Aggregate Material
3 mm up to 1 mm (max)
4 mm up to 1.25 mm (max)
5 mm up to 1.5 mm (max)
6 mm up to 2.0 mm (max)
8 mm up to 2.5 mm (max)
9.5 mm up to 2.5 mm (max)
10 mm up to 2.5 mm (max)
11 mm up to 2.5 mm (max)
13 mm up to 2.5 mm (max)
14 mm up to 2.5 mm (max)
Nozzle
Size
Interior
Smooth Material
3 mm Fine Finish Orange Peel/Fog
4 mm Fine Finish Orange Peel/Fog
5 mm Orange Peel, Small Splatter
6 mm Orange Peel, Small Splatter
8 mm Splatter, Small to Medium Knockdown
9.5 mm Acoustics/Popcorn, Splatter, Medium Knockdown
10 mm Acoustics/Popcorn, Large Knockdown
11 mm Acoustics/Popcorn, Large Knockdown
13 mm Acoustics/Popcorn, Large Knockdown
14 mm Acoustics/Popcorn, Large Knockdown
MODEL: TexSpray HTX 2030-Complete TexSpray HTX 2030-Complete Plus+
PART NUMBER: 258740 258741
FOR SPRAYING: For exterior aggregate and smooth
finishes as well as common
interior texture finishes such as
orange peel, splatter, knockdown
and simulated acoustic.
For exterior aggregate and smooth
finishes as well as common interior
texture finishes. Can also airlessly
apply the wide range of heavier
smooth coatings, Level 5, primers
and paints.
INCLUDES:
High-Output Piston
Texture Pump
✓ ✓
FreeFlo™Inline Gun ✓ ✓
3/4 in x 50 ft
(19 mm x 15 m) Hose
✓ ✓
55 Gallon Suction Set ✓ ✓
Fine Finish Kit with 1/8 in,
1/4 in, 5/16 in and
3/8 in nozzles
✓ ✓
4,6,8,10 mm Nozzles ✓ ✓
RAC X™671 Airless Tip ✓ ✓
MaxLife Endurance High
Pressure Airless Pump
Optional
(Pump Kit 24B140)
✓
HD Blue Texture Gun ✓
1/4 in x 3 ft (6.4 mm x .9 m)
Whip Hose
✓
RAC X 643 Airless Tip ✓
TECHNICAL SPECIFICATIONS
High-Output Texture Pump with High-Output
Texture Pump
with MaxLife™
Endurance High
Pressure Pump
Maximum Tip Size 0.071 0.071 0.048
Maximum gpm/lpm 3.0 gpm (11 lpm) 3.0 gpm (11 lpm) 2.2 gpm (8.3 lpm)
Maximum Working
Pressure
1000 psi (70 bar) 1000 psi (70 bar) 3300 psi (227 bar)
Engine 200cc Honda®(6.5 hp at 3600 rpm) 200cc Honda®(6.5 hp at 3600 rpm)
Compressor User supplied air compressor
required for some texture finishes.
Minimum air compressor rating 25
cfm @ 90 psi (708 lpm @ 6.2 bar)
for best results
User supplied air compressor required
for some texture finishes. Minimum air
compressor rating 25 cfm @ 90 psi (708
lpm @ 6.2 bar) for best results
Weight 155 lbs (70 kg) 155 lbs (70 kg) 150 lbs (68 kg)
PUMP:
Intake QuikAccess™QuikAccess QuikAccess
Rod Hard Chrome Hard Chrome ChromeX™
Cylinder Hard Chrome Hard Chrome MaxLife™
Packings HD Poly HD Poly V-Max Blue
SPRAYER CONFIGURATIONS