INSTALLATION
1. Follow
the
Pressure Relief Procedure W
arning
on
the
front page.
2. Use a 5/16 in. flat bottom tap (5/16–18 UNC or
5/16–20
UNF) to thread into the seat 4 to 6 threads or
until
the seat can be pulled out, then pull the seat out.
See
Fig 1.
CAUTION
If
the tap turns tightly after 4 to 6 turns in the seat,
you
may be threading
into the bracket.
Stop turn
-
ing
the tap!
If you are unable to pull the insert out,
pry
it out with a small screw driver blade.
3. Remove
loose material from the fluid fitting bracket.
4. Use a rubber hammer to tap the replacement seat
into
the fluid fitting bracket.
Fig 1
Fluid Fitting
Bracket
Tap Collet
5/16–18 UNC or
5/16–24 UNF
Flat
Bottom T
ap
Fluid Fitting Seat
THE
GRACO W
ARRANTY AND DISCLAIMERS
WARRANTY
Graco
warrants all equipment manufactured by it and bearing its name to be free from defects in material and workmanship on the date of sale
by
an authorized Graco distributor to the original purchaser for use. As purchaser
’
s sole remedy for breach of this warranty
, Graco will, for a
period
of twelve months from the date of sale, repair or replace any part of the equipment proven defective. This warranty applies only when the
equipment
is installed, operated and maintained in accordance with Graco’
s written recommendations.
This
warranty does not cover
, and Graco shall not be liable for
, any malfunction, damage or wear caused by faulty installation, misapplication,
abrasion,
corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of non–Graco component parts.
Nor
shall Graco be liable for malfunction, damage or wear caused by the incompatibility with Graco equipment of structures, accessories,
equipment
or materials not supplied by Graco, or
the improper design, manufacture, installation, operation or maintenance of structures, ac
-
cessories,
equipment or materials not supplied by Graco.
This
warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco
distributor for verification
of
the claimed defect. If the claimed defect is verified, Graco will repair or replace free
of charge any defective parts. The equipment will be
returned
to the original
purchaser transportation prepaid. If inspection of the equipment does not disclose any defect in material or workman
-
ship,
repairs will be made at a reasonable charge, which charges may include the costs of parts, labor and transportation.
DISCLAIMERS AND LIMITATIONS
THE
TERMS OF THIS W
ARRANTY CONSTITUTE PURCHASER’S SOLE AND EXCLUSIVE REMEDY AND ARE IN LIEU OF ANY OTHER W
ARRANTIES (EXPRESS OR IMPLIED),
INCLUDING W
ARRANTY OF MERCHANT
ABILITY OR W
ARRANTY OF FITNESS FOR A P
AR
TICULAR PURPOSE, AND OF ANY NON–CONTRACTUAL LIABILITIES, INCLUDING
PRODUCT
LIABILITIES, BASED ON NEGLIGENCE OR STRICT LIABILITY
. EVER
Y FORM OF LIABILITY FOR DIRECT
, SPECIAL OR CONSEQUENTIAL DAMAGES OR LOSS IS
EXPRESSLY
EXCLUDED AND DENIED. IN NO CASE SHALL GRACO’S LIABILITY EXCEED THE AMOUNT OF
THE PURCHASE PRICE. ANY ACTION FOR BREACH OF W
AR-
RANTY MUST BE BROUGHT WITHIN TWO (2) YEARS OF THE DATE OF SALE.
EQUIPMENT NOT COVERED BY GRACO WARRANTY
GRACO
MAKES NO W
ARRANTY
, AND DISCLAIMS ALL
IMPLIED W
ARRANTIES OF MERCHANT
ABILITY AND FITNESS FOR A P
ARTICULAR PURPOSE, WITH RESPECT TO
ACCESSORIES,
EQUIPMENT
, MA
TERIALS, OR COMPONENTS SOLD BUT NOT MANUF
ACTURED BY GRACO.
These items sold, but not manufactured by
Graco
(such
as electric motor
, switches, hose, etc.) are subject to the warranty
, if any
, of their
manufacturer
. Graco will provide purchaser with reason
-
able
assistance in making any claim for breach of these warranties.
Factory
Branches:
Atlanta, Chicago, Dallas, Detroit, Los Angeles, W
est Caldwell (N.J.)
Subsidiary and Affiliate Companies:
Canada; England; Switzerland; France; Germany; Hong Kong; Japan
GRACO INC. P
.O. BOX 1441 MINNEAPOLIS, MN 55440–1441
PRINTED
IN U.S.A. 308–022 10–89
