Graham Field LUMEN Ortho-Biotic II FR597G Series User manual

Series FR597G Ortho-Biotic™II Recliner
with Wooden Arm Caps
Series FR597P Ortho-Biotic™II Recliner
with Fully Upholstered Arms
Series FR597GH Ortho-Biotic™II Recliner
with Wooden Arm Caps with Heat and Massage
Series FR597PH Ortho-Biotic™II Recliner
with Fully Upholstered Arms with Heat and Massage
Series FR597GHO Ortho-Biotic™II Recliner
with Wooden Arm Caps with Heat Only
Series FR597PHO Ortho-Biotic™II Recliner
with Fully Upholstered Arms with Heat Only
Series FR597G Shown
Assembly and Operating Instructions
SAVE THIS MANUAL FOR FUTURE USE.
LX_FR597-INS-LAB-RevE21

LX_FR597-INS-LAB-RevE21 2
CONTENTS
INTRODUCTION....................................................................................................................................................................3
INTENDED USE ..............................................................................................................................................................3
IMPORTANT SAFETY PRECAUTIONS—READ BEFORE USE ...................................................................................3
WARNINGS...............................................................................................................................................................3
UNPACKING AND ASSEMBLY.............................................................................................................................................5
PACKAGING ...................................................................................................................................................................5
UNPACKING THE RECLINER........................................................................................................................................5
SERIES FR597 ORTHO-BIOTIC II RECLINER DESCRIPTION AND FEATURES ..............................................................6
OPERATION ..........................................................................................................................................................................7
TENTE®CASTERS..........................................................................................................................................................7
RECLINER OPERATION.................................................................................................................................................7
LEGREST OPERATION..................................................................................................................................................8
EXTENDING LEGREST............................................................................................................................................8
RETURNING LEGREST TO STORED POSITION ...................................................................................................8
RECLINE OPERATION ...................................................................................................................................................8
RECLINING BY PATIENT .........................................................................................................................................8
RETURNING TO UPRIGHT POSITION BY PATIENT ..............................................................................................8
RECLINING BY CAREGIVER ..................................................................................................................................8
RETURNING TO UPRIGHT POSITION BY CAREGIVER........................................................................................8
TRENDELENBURG (SHOCK) POSITION......................................................................................................................8
ACTIVATING TRENDELENBURG POSITION .........................................................................................................8
BRINGING THE RECLINER OUT OF TRENDELENBURG POSITION...................................................................8
FOOTPLATE OPERATION .............................................................................................................................................9
UNIVERSAL HEADREST OPERATION .........................................................................................................................9
OPTIONAL ACCESSORIES .........................................................................................................................................10
OPTIONAL SIDE TABLE ........................................................................................................................................10
OPTIONAL SIDE TABLE OPERATION..................................................................................................................10
OPTIONAL IV POLE MOUNT.................................................................................................................................10
RECLINERS WITH HEAT AND MASSAGE OR HEAT ONLY FEATURE........................................................................... 11
INSTALLATION AND OPERATING GUIDE .................................................................................................................. 11
DESCRIPTION ........................................................................................................................................................ 11
CONNECTION ........................................................................................................................................................ 11
MAIN COMPONENTS............................................................................................................................................. 11
HEAT AND MASSAGE / HEAT ONLY INSTALLATION INSTRUCTIONS .............................................................12
HEAT AND MASSAGE / HEAT ONLY UNIT OPERATION INSTRUCTIONS.........................................................14
HEAT AND MASSAGE / HEAT ONLY UNIT TROUBLESHOOTING GUIDE.........................................................16
CARE AND MAINTENANCE ...............................................................................................................................................17
EVERY THREE MONTHS .............................................................................................................................................17
UPHOLSTERY MAINTENANCE AND STAIN REMOVAL ............................................................................................17
FOR GUARDIAN, PATRIOT PLUS, RENAISSANCE AND SAVOY FABRICS ONLY ...........................................17
COLOR TRANSFER ...............................................................................................................................................17
DISINFECTANTS ....................................................................................................................................................17
CDC RECOMMENDATIONS.........................................................................................................................................18
DISPOSAL AND KEY TO SYMBOLS .................................................................................................................................20
DISPOSAL.....................................................................................................................................................................20
KEY TO SYMBOLS .......................................................................................................................................................20
TEST PARAMETERS ..........................................................................................................................................................21
TECHNICAL SPECIFICATIONS..........................................................................................................................................21
ACCESSORIES ...................................................................................................................................................................21
LIMITED WARRANTY .........................................................................................................................................................22
INDEX...................................................................................................................................................................................23

LX_FR597-INS-LAB-RevE21 3
INTRODUCTION
This manual contains assembly, operation, and maintenance instructions for Lumex Ortho-Biotic II
Recliners series FR597G (FR597G, FR597GH, and FR597GHO) and FR597P (FR597P, FR597PH, and
FR597PHO). Read the entire manual carefully before using your recliner, and refer to it during use if
you have questions. If you have further questions, call GF Health Products, Inc. / Lumex Technical
Support at 1.770.368.4700.
INTENDED USE
The Lumex Ortho-Biotic II Recliner Series FR597 is intended to make the care, treatment and
recovery of patients easier and more comfortable. Lumex Healthcare Seating is used in a wide
range of healthcare applications including Patient Room, Same Day Surgery, Post-Anesthesia
Recovery, Oncology / IV Therapy, Dialysis and Patient Transport. Lumex Healthcare Seating is
ideal for use in hospitals, clinics, surgery centers, and rehabilitation centers.
Lumex Ortho-Biotic II Recliner Series FR597 supports patient weights up to 350 lb (159 kg) when
EVENLY DISTRIBUTED.
IMPORTANT SAFETY PRECAUTIONS—READ BEFORE USE
The safety statements presented in this chapter refer to the basic safety information that the
Series FR597 user must pay attention to and abide by. There are additional safety statements in
other chapters or sections, which may be the same as or similar to the following, or specic to
the operations. Note the following special statements, used throughout this manual, and their
signicance:
WARNING: Indicates a potential hazard situation or unsafe practice that, if not avoided,
could result in death or serious personal injury.
CAUTION: Indicates a potential hazard or unsafe practice that, if not avoided, could result
in minor or moderate personal injury.
sNOTICE: Indicates a potential hazard or unsafe practice that, if not avoided, could result in
product or property damage.
Info: Provides application recommendations or other useful information to ensure that you get
the most from your product.
WARNINGS
WARNING: Read this entire manual before assembly or operation.
WARNING: Periodically inspect all parts and replace as needed.
 WARNING:Donotusenearanopename,asthechaircouldbeacombustionsource,
resultinginre,propertydamage,andseverepersonalinjury.
WARNING: Service and repair of the Lumex FR597 Ortho-Biotic II Recliner must be
performed by an authorized Lumex distributor. GF Health Products, Inc. is not responsible
for any consequence resulting from any unauthorized service or repair.
WARNING: This product has a maximum weight capacity of 350 lb (159 kg), EVENLY
DISTRIBUTED.
WARNING: Casters must be locked at all times, except during transport.

LX_FR597-INS-LAB-RevE21 4
 WARNING:Unauthorizedmodicationofyourreclinerortheuseofnon-Lumex
replacement parts may change the structure of the recliner and could create a hazardous
condition, which may result in serious injury and will void the warranty.
WARNING: This product can expose you to chemicals including
Di(2-ethylhexyl)phthalate (DEHP) which is known to the State of California to cause
cancer and birth defects or other reproductive harm. For more information go to
www.p65warnings.ca.gov/furniture.
 WARNING:GFHealthProducts,Inc.specicallydisclaimsresponsibilityforanybodily
injury or property damage which may occur during any use which does not comply with
federal, state or local laws or ordinances.

LX_FR597-INS-LAB-RevE21 5
UNPACKING AND ASSEMBLY
1. The Lumex Ortho-Biotic II Recliner is delivered in a three-piece single shipping carton strapped
to a pallet. Upon delivery, ensure all cartons are present. Note any shortages on the delivery
receipt.
2. Check for any obvious damage to the carton or contents. If damage is evident, immediately
notify the carrier, your GF authorized distributor, and / or GF Health Products, Inc. Note ANY
damage to the cartons.
Info: A freight claim CANNOT BE MADE once the recliners are signed for as being received in
good condition. Note any damage to the cartons on the delivery receipt, and call GF immediately
if there is any damage to the product.
PACKAGING
• The Lumex Ortho-Biotic II Recliner is packaged in a unique three-
piece lift-off carton that eliminates the need to lift the recliner out
of the box from the top.
• The recliner base is placed onto a corrugated carton shipping
tray. There are four foam blocks placed in each corner of the
shipping tray to protect the casters during shipment.
• For shipment, the recliner is covered with a carton as well as a
topper for protection. The topper, carton and tray are strapped to
a pallet for shipment, as shown at right.
UNPACKING THE RECLINER
1. Cut the plastic strapping, shown at above right, from the pallet and shipping carton and
discard.
2. Remove the topper and carefully lift the carton off of the bottom tray and recliner and discard.
3. Unlock casters. Each caster is shipped in the locked position (See photo below, where casters
are shown in unlocked position).
Info: With the recliner still on the pallet, use your foot to fold one of the tray sides down so that it
lies at and the recliner can be rolled over it off of the pallet. Or, with assistance, lift recliner from
the tray and place it on the oor.
4. The recliner back and seat areas are covered in plastic to protect the recliner from dirt and
dust during shipment. Remove all protective plastic and discard.
5. Your recliner is now ready for use.
Info: Upholstery cleaning instructions are securely fastened to the push
bar of each recliner.
Three-Piece Lift-Off
Shipping Carton
topper
strapping
carton
tray
pallet
Series FR597G Shown

LX_FR597-INS-LAB-RevE21 6
SERIES FR597 ORTHO-BIOTIC II RECLINER DESCRIPTION AND FEATURES
Directional Locking
Caster (1)
Total Locking
Caster (3)
Trendelenburg Foot Pedal
(RIGHT SIDE ONLY)
Pull-Out Footplate
Legrest-Recline
Adjustment Lever
Padded
Push Handle
Adjustable
Universal Headrest
Series FR597G Shown

LX_FR597-INS-LAB-RevE21 7
OPERATION
TENTE®CASTERS
WARNING: Casters must be locked at all times, except during transport.
The Lumex Ortho-Biotic II Recliner features the latest
design, all-plastic casters from TENTE. Specically
designed for use in healthcare environments, these
casters are easier to clean, easier to move, and tolerate
a wide array of cleaners and chemicals. Each caster is
made from high-grade synthetic materials and features
a double-ball-bearing swivel head. The wheel center is
made of polypropylene and the tire tread of TENTEprene
(thermoplastic rubber). The gray non-marking tires feature
precision ball bearings.
Locking casters: Each Lumex Ortho-Biotic II Recliner
features three total locking casters, identied by black
actuator tabs, that lock both the wheel and the swivel.
To activate the total lock, simply press down on the BLACK actuator tab until it locks. To release
the total lock, press on the raised portion of the actuator tab until the lever is back in the normal
operating position.
Directional (swivel) caster: The fourth caster, located on the right rear position of the recliner, is
a directional (swivel) locking caster only. Identied by a green actuator tab, the directional lock
caster will lock in one of two 180° positions relative to the frame (forward and backward) and
allows the recliner to track straight when pushed. To activate the directional lock, simply press
down on the GREEN actuator tab until it locks — you may need to move the recliner slightly until
the caster locks in a straight line with the recliner frame. To release the directional lock, press on
the raised portion of the actuator tab until the lever is back in the normal operating position.
RECLINER OPERATION
The Lumex Ortho-Biotic II Recliner Series FR597 features a unitized recliner mechanism that
allows independent adjustment of the legrest and back for patient comfort. The easy-access
Trendelenburg (Shock) Position pedal on the RIGHT SIDE of the recliner allows quick activation by
the caregiver.
Info: Trendelenburg (Shock) position can only be activated by a caregiver; Trendelenburg
Position CANNOT be activated by a patient while in the recliner.
green actuator tabblack actuator tab
Directional (Swivel)
Locking Caster
(Right Rear Caster)
Total
Locking Caster

LX_FR597-INS-LAB-RevE21 8
LEGREST OPERATION
Extending Legrest
To activate the legrest, pull the Legrest-Recline Adjustment Lever
(located on the right side of the recliner) rearward — the legrest
will extend out from the recliner.
Returning Legrest to Stored Position
To return the legrest to the stored position, press downward on
the legrest until the legrest locks into place and is ush with the
front of the recliner.
RECLINE OPERATION
Reclining by Patient
Patient: Extend the Legrest as explained above. Pull the Legrest-
Recline Lever rearward and push backward against the recliner back
until the desired back angle is achieved.
Returning to Upright Position by Patient
Patient: Pull back on the Legrest-Recline Lever and sit up. The back
will follow you up and return to the upright position.
Reclining by Caregiver
Caregiver: Standing on the right side of the recliner, pull the Legrest-Recline Lever rearward and
at the same time, push downward on the recliner back until the desired back angle is achieved.
Returning to Upright Position by Caregiver
Caregiver: Pull back on the Legrest-Recline Lever and have the patient sit up slightly. The back
will follow the patient up and return to the upright position.
TRENDELENBURG (SHOCK) POSITION
Info: Trendelenburg (shock) position can ONLY be activated by
a caregiver; Trendelenburg Position CANNOT be activated by a
patient while sitting in the recliner.
Activating Trendelenburg Position
Caregiver: While standing on the RIGHT SIDE of the recliner,
pull the Legrest-Recline Adjustment Lever outward and push
downward on the recliner back until the recliner is in the FULL
RECLINE POSITION. Step downward on the Trendelenburg
Foot Pedal and push downward on the recliner back until the
recliner achieves Trendelenburg Position.
Bringing the Recliner out of Trendelenburg Position
With assistance: step downward on the Trendelenburg Foot Pedal. While holding down the
Trendelenburg Pedal, with an assistant standing behind the recliner, have the assistant grasp the
Padded Push Bar on the recliner back and lift the back up until it reaches the reclined position.
Release the Trendelenburg Foot Pedal. Pull the Legrest-Recline Adjustment Lever outward to
return the back to the fully upright position.
Legrest-Recline
Adjustment Lever
Legrest
(Shown Extended)
Series FR597G Shown Upright
with Legrest Extended
Series FR597G Shown
Fully Reclined
Trendelenburg
Foot Pedal (RIGHT SIDE ONLY)
Padded
Push Bar
Back
Legrest-Recline
Adjustment Lever
Series FR597G Shown in
Trendelenburg (Shock) Position

LX_FR597-INS-LAB-RevE21 9
FOOTPLATE OPERATION
The Lumex Ortho-Biotic II Recliner features a
self-storing footplate for patient comfort and
convenience during patient transport. The
footplate is easily extended when needed and
can be stored safely out of the way when not in
use. To operate the footplate, pull the footplate
out from underneath the recliner until fully
extended. The patient can now rest their feet on
the footplate while being transported. To return
the footplate to the stored position, push the
footplate back underneath the recliner until it
stops and is safely stored under the recliner.
UNIVERSAL HEADREST OPERATION
The Lumex Universal Headrest is standard with
the Lumex Ortho-Biotic II Recliner. The Universal
Headrest has been designed to enhance the
comfort and head support of the patient when
using the recliner.
• The Universal Headrest is installed and
adjusted by utilizing two hook and loop
straps. Place the headrest on the back of
the recliner and pull the two elastic straps
until the straps are taut. Secure the pillow
in position by pressing the hook and loop
sections of the elastic straps together.
• Once the patient is positioned in the recliner,
adjust the position of the headrest under the patient’s head and / or neck where it offers the
most support and comfort.
• The Universal Headrest features a unique shape and contour for maximizing patient comfort.
The pillow has two different neck contours; one small, one large. Depending on the patient’s
size and needs, either side can be used under the patient’s head.
• The Universal Headrest unique shape features an angled design that offers the patient a
different level of support depending on whether the small contour or large contour is placed
under the patient’s head. For more head support, place the larger side of the pillow toward the
top of the recliner. For less head support, reverse the pillow and place the smaller side toward
the top of the recliner. Adjust the Headrest position under the patient’s head for maximum
comfort and support.
Optional IV Pole
and Optional
IV Attachment
Series FR597G Shown
Elastic
Strap
Adjustable
Universal
Headrest
Small Neck Contour
Large Neck Contour
Series FR597G Shown

LX_FR597-INS-LAB-RevE21 10
OPTIONAL ACCESSORIES
The Lumex Ortho-Biotic II Recliner is available with several Factory Installed Optional Accessories.
Optional Side Table
An Optional Side Table is available for
storage of prep materials or patient items.
Order Item FR597GTBLMNT,
Optional Side Table.
Optional Side Table Operation
Raising Side Table: Raise the side table all
the way up and slide in toward the armrest
until tabs engage slots in mounting bracket.
Press down lightly on table to ensure locking
tabs are engaged.
Lowering Side Table: Lift the side table up
slightly until tabs disengage slots and pull
table away from armrest, then lower side
table to self-storing position.
Optional IV Pole Mount
An optional IV Pole Mount (Bracket) and IV
Pole are available for IV Therapy procedures.
IV Pole Mount: Order Item FR597GIVMNT,
Optional IV Pole Mount.
The IV Pole is not included with the Factory
Installed IV Pole Mount and must be ordered
separately.
Order Item 2101, IV Pole.
Optional
Side Table
Series FR597G Shown
Optional IV Pole
Optional IV Pole
Mount
Series FR597G Shown

LX_FR597-INS-LAB-RevE21 11
RECLINERS WITH HEAT AND MASSAGE OR HEAT ONLY FEATURE
HEAT AND MASSAGE: FR597GH / FR597PH; HEAT ONLY: FR597GHO / FR597PHO
INSTALLATION AND OPERATING GUIDE
Tools required: masking or packaging tape
WARNING: Important! Read and understand these instructions before assembling or
using the Specialty Healthcare Seating Heat and Massage / Heat Only Unit. If you do not
understand any part of these warnings, cautions or instructions, contact a healthcare
professional for direction in the use of this product. If the Heat and Massage / Heat Only
Unit is not properly assembled, personal injury and damage to the Heat and Massage / Heat
Only Unit could result.
WARNING: The recliner seat and back heating elements are wired to operate in series only.
Do not change the system wiring in any way.
WARNING: If components are damaged or missing, contact your Graham-Field authorized
distributor immediately. DO NOT use substitute parts. Use only Lumex replacement parts.
The use of non-Lumex replacement parts could cause personal injury, property damage,
and void the warranty.
WARNING: GF Health Products, Inc. assumes no responsibility for any damage or injury
caused by improper assembly or use of this product.
Description
The Lumex Healthcare Seating Heat and Massage / Heat Only Unit is a low-voltage (12V) Heat and
Massage / Heat Only Unit, controllable by the user and / or caregiver via a handheld pendant. It is
designed to enhance the comfort of the patient / resident during the use of Lumex Orthobiotic II
Recliners. The Heat and Massage Unit offers three levels of seat and back heat, as well as a gentle
or rm massage function for just the lower back or both lower and upper back; the Heat Only Unit
offers three levels of seat and back heat.
Connection
The Heat and Massage Unit comes pre-installed in Lumex Orthobiotic II Recliners with the Heat
and Massage Option (FR597GH AND FR597PH); the Heat Only Unit comes pre-installed in Lumex
Orthobiotic II Recliners with the Heat Only Option (FR597GHO AND FR597PHO). During recliner
shipment, the Heat and Selector Switch connections are disconnected. One connection at the
control box is required to make the unit functional.
Main Components
1. All Heat and Massage / Heat Only functions are controlled
by the handheld pendant.
The handheld pendant comes pre-installed and is shipped
within the back compartment. To store the pendant when
not in use or for caregiver use, place it in the pendant
storage bracket mounted on the back of the recliner as
shown at right.
Handheld Heat and Massage
Pendant
Shown in Storage Bracket
on Back of Recliner

LX_FR597-INS-LAB-RevE21 12
Heat and Massage Feature —
Control Module and Transformer Unit
Showing All Connections Correctly Made
Handheld
Pendant
Connector
Heat & Massage
Connectors
Power Cord
Connector
Handheld
Pendant
Connector
Heat Only
Connectors
Power Cord
Connector
Heat Only Feature —
Control Module and Transformer Unit
Showing All Connections Correctly Made
2. The Control Module and Transformer, shown above, are contained in a single unit mounted in
the back compartment. The 8-foot power cord plugs into the wall AC outlet.
Heat and Massage / Heat Only Installation Instructions
1. Place the back cushion over the vertical bayonet lugs of the recliner mechanism. Secure
the back on each side with the threaded screw knobs per the previous Upholstered Back
Assembly instructions.
Raise Back to Access
Back Compartment
Similar Model’s Back
Shown Properly
Installed
Handheld Pendant
Storage Bracket
2. Raise the back skirt on the lower rear of the back cushion, as shown at left above, and use
masking or packaging tape to temporarily secure it up and out of the way. This will permit
uninterrupted access to the back compartment while making the cable connection.
3. Remove the handheld pendant and power cord from the back compartment. Place the
handheld pendant in the storage bracket as shown at right above.

LX_FR597-INS-LAB-RevE21 13
Heat and Massage Feature —
Install Seat Connector
Heat Only Feature —
Install Seat Connector
Insert
Seat
Connector
Here
Insert
Seat
Connector
Here
4. There is only one connection to make — push the seat connector rmly into the control
module until its locking tabs snap into place as shown above.
Connector Security Lock
5. If you need to replace the Hand Pendant, remove the small white connector security lock as
shown above.
6. Remove the tape holding the back ap. Lower the ap and seal the compartment by pressing
rmly around the edges of the back ap.
7. The Heat and Massage / Heat Only Unit is now ready for operation. Instructions for use follow.
sNOTICE: Before rolling the recliner, ensure the power cord is unplugged from the AC outlet.

LX_FR597-INS-LAB-RevE21 14
Heat and Massage / Heat Only Unit Operation Instructions
1. Plug the power cord into any grounded outlet.
Handheld Pendant
Heat and Massage
Handheld Pendant
Heat Only
2. The Heat and Massage / Heat Only Unit is operated using the Handheld Pendant, shown above.
Heat and Massage Heat Only
www.grahamfield.com
GF2000200RevA20
SEE OPERATING MANUAL FOR
COMPLETE INSTRUCTIONS
HIGH HEAT
PRESS 1TIME
MEDIUM HEAT
PRESS 2 TIMES
LOW HEAT
PRESS 3 TIMES
3. The Heat and Massage Pendant Selector Switch Faceplate, shown at above left, has two
membrane switches. The left switch controls the Massage Function and the right switch
controls the Heat Function. You can use either the Heat or Massage or both functions at the
same time.
The Heat Only Pendant Selector Switch Faceplate, shown at above right, has a single
membrane switch to control the Heat Only Function.

LX_FR597-INS-LAB-RevE21 15
4. Heat and Massage MASSAGE Option: Press the MASSAGE switch to start this function. The
Massage Function Settings are as follows:
a) Press selector switch for Setting 1: Gentle Lower Back Massage.
b) Press selector switch AGAIN for Setting 2: Firm Lower Back Massage.
c) Press selector switch AGAIN for Setting 3: Gentle Upper and Lower Back Massage.
d) Press selector switch AGAIN for Setting 4: Firm Upper and Lower Back Massage.
e) Press selector switch AGAIN: Massage function Shuts Off.
5. Heat and Massage or Heat Only HEAT Option: Press the HEAT switch to start this function.
The Heat Function Settings are as follows:
a) Press selector switch for Setting 1: High Heat, 104°F (40°C), brightest LED.
b) Press selector switch AGAIN for Setting 2: Medium Heat, 101°F (38.6°C), bright LED.
c) Press selector switch AGAIN for Setting 3: Low Heat, 100°F (37.8°C), dim LED.
d) Press selector switch AGAIN: Heat function shuts off.
e) There is a small red indicator light, which illuminates only during the Heat function, in the
selector switch. The light’s brightness is determined by the Heat level being used:
Brightest = High Heat; Dimmest = Low Heat.
6. The Unit automatically shuts off at the following times:
a) HEAT FUNCTION: After one hour of continuous use at the same level.
b) MASSAGE FUNCTION: After fteen minutes of continuous use at the same level.
c) To restart the Unit, follow previous steps 4 and 5.

LX_FR597-INS-LAB-RevE21 16
Heat and Massage / Heat Only Unit Troubleshooting Guide
The cables and connections need to be validated. This will require the services of a maintenance
person and a clear working area.
1. INSPECTION: Perform the following checks. If a working recliner of the same model is available,
use it for comparison.
a) Is the AC cord properly connected to the power supply? Is the cable from the power supply
to the control module junction box in place?
b) With the power supply AC cord plugged into a live AC outlet, does the small light to the
left of the white seat symbol (located on the switch) light up when the switch is pressed
repeatedly or is there any indication of massage operation?
WARNING: Disconnect the power cord from the AC outlet before performing the following
steps!
c) Is there any sign of external damage to the handheld pendant or wire?
d) Is there any sign of external damage to the recliner?
e) Do any of the cables show any sign of damage or pinch points?
f) Are all cable connections to the control module in place? Are the connectors fully engaged?
g) Are any of the connectors damaged?
h) Are the wires within the connectors attached to the pins? Each wire may have to be tugged
lightly to check if the wire is still crimped to the pin.
2. POST-INSPECTION:
a) If improper or loose connections are found, reconnect them rmly (unless a loose wire has
been found). Plug the power supply AC cord into a live wall socket and operate the unit
through all functions.
b) If the handheld pendant or wire is damaged, notify Graham-Field so that a handheld
pendant can be sent for replacement.
c) If damage to any other electrical cable or component, or disconnected wires are found,
please notify Graham-Field.
3. ACTIONS:
a) If full operation is restored, please advise Graham-Field of your successful outcome.
b) If the fault cannot be corrected by simple re-connection, please inform Graham-Field of the
results of your inspection in detail so that we may determine the appropriate action to be
taken.
If you have any questions about the setup and / or operation of the Heat and Massage / Heat Only
Unit, call the Graham-Field Technical Support Group at 1.770.368.4700.

LX_FR597-INS-LAB-RevE21 17
CARE AND MAINTENANCE
WARNING: Inspect all components every three months and replace as needed.
EVERY THREE MONTHS
• Check and clean casters.
• Tighten bolts in each caster plate to ensure casters are secured tightly to frame.
• Check caster brakes.
• Check and clean legrest recline lever.
• Check recliner mechanism for operation in all positions, including Trendelenburg Position, with
assistant seated in recliner.
• Wooden armrest caps are nished in a water-based urethane. To clean, wipe with a mild surface
cleaner. Armrest caps should be disinfected with a bleach-based wipe.
• If optional side table and / or optional IV pole are installed, check all mounting screws for
tightness.
UPHOLSTERY MAINTENANCE AND STAIN REMOVAL
We recommend cleaning at least once a week to extend the lifespan of the upholstery. This
prevents dirt and other contaminants from building up and stains from becoming permanent. If
there is a spill, wipe off any excess right away with a dry cloth, making sure not to spread it all
over the surface.
• Clean the whole surface in circular motions using liquid hand soap (pH neutral) and water (1
part soap to 9 parts water). Wipe with a clean damp cloth to get rid of any excess soap.
• Repeat as needed and then let dry.
For Guardian, Patriot Plus, Renaissance and Savoy fabrics only
If there is any build-up that can’t be removed with soapy water, then use this as a last resort.
Mixture: 1 part isopropyl alcohol to 1 part water.
Info: Using alcohol on a regular basis can affect the properties of the product.
• Once a month, you can use a soft-bristle brush for a deeper cleaning.
Info: Light colors need more care, more often.
Info: The cleaning products recommended were used in a laboratory setting. Spradling Group®
has no relationship with the manufacturers of those cleaning products.
Color Transfer
Certain clothing and accessory dyes (such as those used on denim jeans) may migrate to lighter
colors. This phenomenon is increased by humidity and temperature and is irreversible.
Check compatibility when using this product in combination with painted or varnished surfaces.
Disinfectants
In addition to cleaning, healthcare facilities maintain disinfecting regimens to reduce the spread
of infections. There is a wide variety of available biocides that include bleaches, peroxides and
quaternary ammonium products, among others. They should always be used at the recommended
dilution, never in concentrated form. To prolong the life of coated fabrics, the disinfectants should
be rinsed off after each use.

LX_FR597-INS-LAB-RevE21 18
Info: Misuse of disinfectants is the major source of surface deterioration. Spradling International,
Inc.®continually evaluates cleaners/disinfectants, and a list of those tested can be found on their
website.
Abrasion test results exceeding ACT Performance Guidelines are not an indicator of product
lifespan. Multiple factors affect fabric durability and appearance retention.
This information is not a guarantee and does not relieve the user from the responsibility of the
proper and safe use of the product and all cleaning agents. The use of certain agents can be
harmful to the surface appearance and lifespan of vinyl. Spradling, its agents, and assignees
assume no responsibility resulting from the use of such cleaning agents to the vinyl.
Check compatibility when using this product in combination with painted or varnished surfaces.
Spradling Group®and Spradling International, Inc.®are registered trademarks of Spradling
Holdings, Inc.
CDC RECOMMENDATIONS
CLEANING AND DISINFECTING STRATEGIES FOR ENVIRONMENTAL SURFACES IN PATIENT-
CARE AREAS FOR VINYL UPHOLSTERY, WALL COVERINGS AND FLOORING
• Select EPA-registered disinfectants, if available, and use them in accordance with the
manufacturer’s instructions.
• Do not use high-level disinfectants / liquid chemical sterilants for disinfection of either
noncritical instruments and devices or any environmental surfaces; such use is counter to label
instructions for these toxic chemicals.
• Follow manufacturers’ instructions for cleaning and maintaining noncritical medical
equipment.
• In the absence of a manufacturer’s cleaning instructions, follow certain procedures:
• Clean noncritical medical equipment surfaces with a detergent / disinfectant.
• Do not use alcohol to disinfect large environmental surfaces.
• Use barrier protective coverings as appropriate for noncritical surfaces that are:
• Touched frequently with gloved hands during the delivery of patient care.
• Likely to become contaminated with blood or body substances.
• Difcult to clean (e.g., computer keyboards).
• Keep housekeeping surfaces (e.g., oors, walls, tabletops) visibly clean on a regular basis and
clean up spills promptly.
• Use a one-step process and an EPA-registered hospital detergent / disinfectant designed for
general housekeeping purposes in patient-care areas where:
• Uncertainty exists as to the nature of the soil on the surfaces (whether it is blood or body
uid or just normal dust or dirt).
• Uncertainty exists regarding the presence of multi drug resistant organisms on such
surfaces.
• Detergent and water are adequate for cleaning surfaces in nonpatient-care areas (e.g.,
administrative ofces). Clean and disinfect high-touch surfaces on a more frequent schedule
than minimal-touch housekeeping surfaces. Clean walls, blinds, and window curtains in patient-
care areas when they are visibly dusty or soiled.
• Do not perform disinfectant fogging in patient-care areas.

LX_FR597-INS-LAB-RevE21 19
• Avoid large-surface cleaning methods that produce mists or aerosols, or disperse dust in
patient-care areas.
• Follow proper procedures for effective uses of mops, cloths, and solutions.
• Prepare cleaning solutions daily or as needed, and replace with fresh solution frequently
according to facility policies and procedures.
• Change the mop head at the beginning of each day and also as required by facility policy, or
after cleaning up large spills of blood or other body substances.
• Clean mops and cloths after use and allow to dry before reuse; or use single-use, disposable
mop heads and cloths.
• When performing low- or intermediate-level disinfection of environmental surfaces in nurseries
and neonatal units, avoid unnecessary exposure of neonates to disinfectant residues on these
surfaces by using EPA-registered germicides in accordance with manufacturers’ instructions
and safety advisories.

LX_FR597-INS-LAB-RevE21 20
DISPOSAL AND KEY TO SYMBOLS
DISPOSAL
Lumex Recliner equipment and accessories can be disposed of.
We recommend disassembling and dividing the equipment and components into different
waste groups such as: metal, cable, electronic, recoverable resource and plastic for recycling or
combustion.
Most plastic components are provided with a plastic types code and ber content to aid sorting of
plastic parts.
Product Metal Scrap Cable Scrap Electronic Scrap Plastic Recycling or Combustion
FR597G X X N/A X
FR597GH X X X X
FR597GHO X X X X
FR597P X X N/A X
FR597PH X X X X
FR597PHO X X X X
KEY TO SYMBOLS
The following symbols are used on Lumex Recliner product labels.
MANUFACTURER
FRAGILE, HANDLE WITH CARE
CE MARK
CAUTION
EC REP EUROPEAN AUTHORIZED
REPRESENTATIVE
UDI UNIQUE DEVICE IDENTIFIER
GENERAL WARNING SIGN
KEEP DRY
ELECTRICAL AND ELECTRONIC
EQUIPMENT
CONSULT INSTRUCTIONS FOR USE
MD MEDICAL DEVICE