Grandio GP-EZ1 User manual

GREENHOU S E S
GRANDIO
© 2013 Grandio Greenhouses, Backyard Living Source Inc. All rights reserved
2015 Manual Edition All Greenhouse Models
INTERIOR FRAME TO BASE ANCHOR KIT
(GP-EZ1-BRACKET) FRAME TO BASE ANCHOR KIT PARTS LIST
S06/NY06
EZ1
EZ2
BOLT AND NUT COMBO
BRACE
BRACKET
32
8
8
IMAGE PART NAME 8 PACK 4 PACK
16
4
4

1.1 Pre thread the top two S06/NY06 nut and bolt combos on the EZ1, see .
1.2 See . Slide 1. S06/NY06 nut and bolt combo into the entry notch to slide into the channel of the 602A or 602C, twist member then
slide up the track to align 2. S06/NY06 nut and bolt combo with notch entry of channel. Slide EZ1 down track to bottom to align with the
base see .
1.3 Slide EZ2 into the base then twist into place, note the t will be tight, align with the EZ1. See 3.
1.4 Insert the 2 remaining sets of S06/NY06 nut and bolt combos so the nut faces you for tightening. See .
Check that all nut and bolt combos are tightened. If this is installed where an L08C-X goes attach to the front of the EZ1
Nut and Bolt combo.
EZ1 INSTALLATION
PRE THREAD S06/NY06
Base
Base
1.
2.
3.
EZ2
EZ1
S06/NY06
EZ1
602A or 602C
602A or 602C
BOLT ENTRY
NOTCH
1
GRANDIO
TIP See our website for
helpful videos and tips
related to the EZ1 Bracket installation
at: GrandioGreenhouses.com
or call: 1-866-448-8231