Grandstream Networks DP715 User manual

© 2016 Genusys Inc. All rights reserved| gTalk PBX, www.gtalkpbx.com | Support: [phone]
1
How to Use Grandstream DP715 IP Phone
The DP715/710 Handset has a dynamic screen. The screen displays differently depending on whether
the handset is idle or in use (active screen).
Handset keys description
Key number
Features
Description
1.
Display
2.
Right display button (display functions)
3.
3. Up/Redial key
-Redial List : Display your 10 last Outgoing calls
-Up Navigation key
-Increase the volume during the call.
4.
Right/Recall key
-Recall-Key/hook-flash key used to place call on
hold toggle between calls.
5.
On-hook/Power key
-Power Key : Turn on / Off the handset
-On-hook: Terminate calls.
6.
Alphanumeric keypad
gTalk® PBX USER GUIDE

© 2016 Genusys Inc. All rights reserved| gTalk PBX, www.gtalkpbx.com | Support: [phone]
2
7.
Keypad lock key
8.
Microphone
9.
Ringer off-key
10.
Down/Calls list key
-Call List : Display your 30 last Incoming
calls/Missed calls
-Down Navigation key
-Decrease the volume during the call.
11.
Off-hook key/Handsfree key
-Off-hook key : Answer calls
-Hands free key
12.
Left/Internal call key
-Internal Call key : Allows you to make an
internal call to any Handset
registered to the same DP715 Base Station
13.
Left display button (display functions)
Completing Calls
There are three ways to complete a call:
A. Dial
1. Press
3. Dial the number you want once you hear the dial tone.
4. The number appears on the display wait for 4 seconds (Default “No Key Entry Timeout”); or press # to
dial the number directly (Use # as dial key” must be configured in web configuration).
5. To finish the call, press or place the handset in the base unit or the charger unit.
B. Redial
1. Press
2. The number you have most recently called appears in first place in the display.
3. Use or to search for the number you need.
4. Press

© 2016 Genusys Inc. All rights reserved| gTalk PBX, www.gtalkpbx.com | Support: [phone]
3
5. The number appears on the display wait for 4 seconds (Default “No Key Entry Timeout”); or press # to
dial the number directly (Use # as dial key” must be configured in web configuration).
6. To finish the call, press or replace the handset in the base unit or the charger unit.
Answering Calls
The handset starts ringing during an incoming call; you have the following options to answer:
a. Press to pick up the call.
b. Pick up the handset from the base or charger unit (Only if Auto Talk option is activated).
To finish the call, press or place the handset in the base or the charger unit.
Call Hold
Place a call on hold by pressing the “Recall” button on the Handset. Press the “Recall” button again
to release the previously held Caller and resume conversation.
Call Transfer
This function is applicable using the Handset for VoIP calls only. Assume that parties Aand Bare in
conversation. Party Awants to Attend Transfer Bto C:
1. Apress (RECALL) on the Handset for dial tone.
2. Athen dials Caller C’s number followed by # (or wait for 4 seconds).
3. If C answers the call, Aand Care in conversation. Then Acan hang up to complete transfer.
4. If C does not answer the call, A can press “flash” to resume call with Caller B.
3-Way Conference
Assume that parties Aand Bare in conversation. Party Awants to bring Cinto a 3-way conference:
1. A presses (on the Handset) to get a dial tone.

© 2016 Genusys Inc. All rights reserved| gTalk PBX, www.gtalkpbx.com | Support: [phone]
4
2. A dials C’s number then # (or wait for 4 seconds).
3. If C answers the call, then Apresses to bring B, Cin the conference.
4. If Cdoes not answer the call, Acan press back to talk to B.
5. If A presses during conference, Cwill be dropped out.
6. If A hangs up, the conference will be terminated for all three parties when configuration “Transfer
on Conference Hang up” is set to “No”. If the configuration is set to “Yes”, Awill transfer Bto Cso
that Band Ccan continue the conversation.
Call Pickup
The Call Pickup feature allows users to pick up incoming calls within their own pre-designated zone.
To pick up an incoming call within the your own pre-designated zone simply dial *7 and then #
Voice mail
Dial your own extension number to access voice mail:
• Enter your voice mail pass code (if any).
• To hear new voice mail press 1.
• To hear old voice mail press 2.
•To delete a voice mail press 3.
Transfer to Voice mail
This feature allows you to transfer someone (either a caller or a called person) to leave a voice mail to a
specific extension.
• To transfer to specific extension to leave voice mail: Press button, then dial *6<ext. number>, and
after that immediately press the button again.
• To leave a voice mail to a specific extension: Dial *6<ext. number>.

© 2016 Genusys Inc. All rights reserved| gTalk PBX, www.gtalkpbx.com | Support: [phone]
5
Call Forward
Activating Call Forwarding:
Activate Call Forwarding feature whenever you want your calls to be forwarded to another phone. Once
activated, all incoming calls will be forwarded to the number you specified.
• Dial *41 + Number + # - To forward incoming calls to a specific telephone number for any reason.
• Dial *42 + Number + # - To forward incoming calls to a specific telephone number when unreachable.
• Dial *43 + Number + # - To forward incoming calls to a specific telephone number after Ring-Timeout.
Deactivating Call Forwarding:
• Dial *44# - To cancel call Forwarding .
Note: You may also configure your Call Forwarding feature by login to your account panel.
Block Caller ID
This feature allows you to block your phone number along with your name i.e. CNAM information
associated with your phone number.
To set Block Caller ID: *31#
To remove: *32#
Note: You may also configure your Block Caller ID feature by login to your account panel.
Anonymous Call Block
With Anonymous Call Block, all incoming calls from unknown callers will hear a busy tone. So you may
no longer want to receive calls from the caller's phone numbers.
Dial *33# -- To block anonymous calls.
Dial *34# -- To cancel anonymous call block.
Note: Also you may enable this feature by login on to your account panel.
Selective Call Blocking
This feature allows you to block incoming calls that you have placed on a list of phone numbers you wish
to be blocked.

© 2016 Genusys Inc. All rights reserved| gTalk PBX, www.gtalkpbx.com | Support: [phone]
6
Dial *35 + number# -- To add a specific telephone number to block list.
Dial *36 + number# -- To delete a specific telephone number from block list.
Note: Also you may configure this feature by login to your account panel. You may Add/Edit/Delete any
number which you want to block/unblock.
Speed Dial
A speed dial number is a numeric number to which a destination telephone number is pre-set by a
caller. This allows the caller to avoid dialing the full destination number. gTalk PBX providing 99 (1-99)
speed dial facility.
gTalk PBX provides 99 (1-99) Speed Dial facility. To set speed dial
01. Login to your gTalk PBX account
02. Go to Speed Dial under User Menu
Follow onscreen instructions to Add/Edit/Delete Speed Dial number.
How to Install gTalk PBX Mobile App
With every Extension gTalk PBX offers a feature rich App compatible with Android and iPhone sets.
To install gTalk PBX App for Android sets, download the App on your smart phone by browsing
the Google Play Store. Search for “gTalk PBX”and then press Install. Once installed enter
Account ID, Extension and password to login gTalk PBX App.
To install gTalk PBX App for iPhone sets download the App on your smart phone by visiting the
Apple Store, search for “gTalk PBX”and then press Install. Once installed enter Account ID,
Extension and password to login gTalk PBX App.

© 2016 Genusys Inc. All rights reserved| gTalk PBX, www.gtalkpbx.com | Support: [phone]
7
Use of gTalk PBX Mobile App
Use of the gTalk mobile App is user friendly and intuitive. Most
of the functions of your gTalk IP Phone sets may be performed
by using gTalk Mobile App. Some of the important functions
are: Make or receive calls, check voice mail or missed calls,
set call receive preferences, line preference, see extension
directory and make direct calls, make call using speed dial etc.