Gratz Pilates REFORMER User manual

REFORMER
Assembly Instructions

attention !
Gratz Pilates is not
responsible for any
damage to the reformer
unit and equipment that
may happen by person
performing installation
improperly.
assembling your reformer
These instructions will show you how to
assemble and set up your reformer. Please
make sure you have all the items out of the
box listed below and you will need the items
listed on the following page to complete
assembly.
what comes in the box
A. (1) reformer frame (with (1) padded foot bar)
B. (1) Carriage (with (4) springs & (2) leather straps)
C. (2) Aluminum & wood handles
D. (1) Weighted pole
E. (1) Upholstered long/short reformer box
F. (1) Spring bar
G. (2) Thick rubber pads
H. (2) Gear stoppers
I. (2) 20” foot straps
J. (2) 27” extension straps
?

attention !
Gratz Pilates is not
responsible for any
damage to the reformer
unit and equipment that
may happen by person
performing installation
improperly.
assembling your reformer
These instructions will show you how to
assemble and set up your reformer. Please
make sure you have all the items out of the
box listed below and you will need the items
listed on the following page to complete
assembly.
what comes in the box
A. (1) reformer frame (with (1) padded foot bar)
B. (1) Carriage (with (4) springs & (2) leather straps)
C. (2) Aluminum & wood handles
D. (1) Weighted pole
E. (1) Upholstered long/short reformer box
F. (1) Spring bar
G. (2) Thick rubber pads
H. (2) Gear stoppers
I. (2) 20” foot straps
J. (2) 27” extension straps
?
A.
B.
C.
F.
D.
E.
H. G.
I.
J.

what you will need
A. (2) people
B. (1) box cutter
A. (2) people
B. (1) box cutter

what you will need
A. (2) people
B. (1) box cutter
A. (2) people
B. (1) box cutter
you will need
box cutter
important:
if there is anything missing
or damaged from you box
please let us know at your
soonest convenience so
that a remedy can be made
step 1 remove contents from box
- place box long side down
- use box cutter to carefully cut ties
- three packed bundles should be in box
with everything shown on page 1 & 2

step 2 place spring bar on frame
- locate spring bar in box and gears on reformer frame
- place spring bar in preferred gear with hooks
facing away from the footbar

step 2 place spring bar on frame
- locate spring bar in box and gears on reformer frame
- place spring bar in preferred gear with hooks
facing away from the footbar
step 3 place carriage on reformer
- locate carriage and reformer rails
- place carriage on reformer rails with
carriage springs facing the spring bar
- hook carriage springs to spring bar
- feed leather straps through wheel glides
- hook leather straps to handles

step 4 prep for use
- prior to using make sure all springs are
in place to your liking and are properly
attached
- make sure your spring bar is in the gear
you want
- if needed, add the gear blocks to your
liking
- set up reformer box to your liking
- enjoy your Gratz Reformer