Great Little Trading L4450 User manual

1
Buttery Dolls House
12/06/2018
V1
easy - medium - hard
Assembly Difculty
one-person job
L4450
A few important pointers before you start:
• Please read the instructions right through before you start, and check
that all the components have been included in the pack; we nd
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
• Make sure you have the right tools.Allen keys are provided if required,
but screw drivers and other tools are not. You’ll nd details of the tools
you need at the beginning of the instructions.
• It’s a good idea to build the unit in the room where you are going to be
using it, to avoid the need to move it after it’s been assembled.
• Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you’ll sail
through the whole process. But if it all feels a bit too much
like hard work, then we do have an assembly company we
can recommend: the Flatpack Construction Company offers a
nationwide service and can be contacted on 0843 289 4951 or
www.atpackconstruction.co.uk.

2
Safety Warnings:
• Not suitable for children under 3 years due to small parts which may
become detached and present a choking hazard.
• Adult assembly required.
• Assemble and use on a at and level surface.
• Unassembled product contains small parts which may present a
choking hazard.
• Children should be kept away from the product during assembly to
avoid any possible risk of injury.
• DO NOT use power tools in the assembly of this product as there is a
risk of over-tightening and consequently splitting of the wood.
• Check all xtures and ttings regularly and tighten as necessary.
• Check the item regularly for signs of damage which may make the
product unsafe.
• Remove all packaging before giving to a child.
• Please retain these instructions for future reference.
Customer Service:
• If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
• We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
• Wipe clean only.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
• Do NOT expose the item to extremes of heat and humidity.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [e-mail]
Thank you.

3
Component Check List
A B I J
KLCD
1x
E F
GH
M
#1
2x Screws
16mmL
You will need
(not supplied)
Phillips Head Screwdriver
1x
1x 1x
1x 1x
1x 1x
1x 2x
1x 1x
9x

4
F
E
A
M
M
D
A
F
EG
D
C
B
F
E
M
M
M
M
M
STEP 1:
Push side panels E and F
into base panel A. Secure
panel E to panel A using 1x
locking peg (M).
The peg should be pushed
through the slot that is
visible when the panel E is
inserted through the slot
on panel A.
Repeat this process for
panel F.
Only insert the locking
pegs through the rear
slots.You will do the front
two pegs in step 5.
STEP 2:
Slide panel D into the
grooves on panels E, F and A.
Insert panel G into panel A.
Secure panel G to panel A
using 1x locking peg (M).
STEP 3:
Slide panels B and C along
the grooves on the internal
faces of panels E and F.
The panel should be slid all
the way to the end, so the
locking proles go through
panel D.
STEP 4:
Secure panels B and C to panel
D using 4x locking pegs (M).
C
D
To avoid accidental damage to panels, we
suggest you build this item on a soft surface
e.g a carpet or rug.

5
STEP 7:
Place roof panel J over panels E and F. Finally insert the two staircases (L) into
the slots on panels A and B.
The assembly is now complete.
Copyright© 2018 G.L.T.C. Ltd. All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
STEP 6:
Place roof panel K
over panels E and F.
Secure panels E and
F to panel K using 2x
screws (#1).
M
M
Hardware for Step 6:
2x #1 16mmL screw
H
I
STEP 5:
Insert door panels H
and I.
Firstly insert the top
hinge on panel H
into the hole on the
underside of panel C.
Now push the
bottom hinge into
the hole on panel
A, to do this you
will need to very
gently press panel A
downwards.
Repeat this process
for door panel I.
With both doors now in place, now insert the locking pegs (M) to secure panels E
and F to panel A.
A
E
F
K
E
F
#1
#1
B
A
L
L
J
C