Great Little Trading L5172 User manual

1
Play & Store Wooden Toy Castle
29/04/2021
V1
easy - medium - hard
Assembly Difculty
one-person job
L5172
A few important pointers before you start:
• Please read the instructions right through before you start, and
check that all the components have been included in the pack;
we nd separating all the hardware into piles makes it easier to
be sure that everything is present and correct.
• Make sure you have the right tools.Allen keys are provided
if required, but screw drivers and other tools are not.You’ll
nd details of the tools you need at the beginning of the
instructions.
• It’s a good idea to build the unit in the room where you are
going to be using it, to avoid the need to move it after it’s been
assembled.
• Do not throw away any packing materials until assembly is
complete, just in case you accidentally discard smaller parts or
hardware.
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.

2
Safety Warnings:
• Adult assembly required.
• Not suitable for children under 3 years due to small parts that may
present a choking hazard.
• Not suitable for children under 3 years due to small balls that may
present a choking hazard.
• Assemble and use on a at and level surface.
• Children should be kept away from the product during assembly to
avoid any possible risk of injury.
• DO NOT use power tools in the assembly of this product as there is a
risk of over-tightening and consequently splitting of the wood.
• Check all xtures and ttings regularly and tighten as necessary.
• Check the item regularly for signs of damage which may make the
product unsafe.
• Dispose of packaging carefully to avoid injury to young children.
• Please retain these instructions for future reference.
Customer Service:
• If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
• We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
• Wipe clean using a soft damp cloth followed by a dry cloth.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
• Do NOT expose the item to extremes of heat and humidity.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [e-mail]
Thank you
Registered Address:
GLTC Ltd, 12 Buckhold Road,
Wandsworth, London, SW18 4GP, United Kingdom
Authorised Representative:Authorised
Representative Service, 77 Camden Street Lower,
Dublin, D02 XE80, Ireland

3
Component Check List
You will need
(not supplied)
Phillips Head
Screwdriver
A B
E
H
K
N
F
I
L
O
C
DT U
V
G
J
1x 1x 1x
1x
2x
1x
18x
3x
1x 1x 1 x
1x 1x
#1
1x
1x 1x 1x
1x 1x 1x
P Q
M
R
S
1x 1x 1x

4
STEP 1:
Attach part B to panel A using 2x screws (#1).
STEP 2:
Attach part C to panel A using 1x screw (#1).
STEP 3:
Attach panel D to side of part C (attached in step 2) using 1x screws (#1).
STEP 4:
Attach side panel E using 5x screws (#1).
A
A
D
B
E
#1
#1
#1
#1
#1
#1
Hardware for Step 4:
5x #1 Screws
C
C
Hardware for Step 3:Hardware for Step 1:
Hardware for Step 2:
1x #1 Screws 2x #1 Screws
1x #1 Screws
#1
#1
#1

5
Hardware for Step 7:
6x #1 Screws
STEP 6:
Attach part G to the reverse of panel E using 2x screws (#1).
Next attach the handle, part H to the reverse of panel E using 1x screw (#1).
STEP 8:
Insert parts L and M into side panel K
(attached in Step 7).
All the other pieces will store inside the
castle.
STEP 5:
Slot in door panel F onto the reverse of panel E.
STEP 7:
Lay the castle carefully down onto a
soft surface (ideally carpet), and turn
the castle on its side with panel E on
a at surface.
Once the castle is on its side, attach
panels I and J into place using their
pre-attached dowels at either end.
Once attached, secure panel K on to
castle using 6x screws (#1).
#1
#1
#1 #1
#1
#1
#1
#1
#1
Hardware for Step 6:
3x #1 Screws
I
J
G
H
K
M
K
L
E
E
E
F
I

6
STEP 9:
Lower side panels I and J. Once at, take panels O and N and
slot them into the side of panel E using their pre-attached
dowels on either side.
STEP 10:
Insert parts P and Q into place using the pre-attached dowels at the side
and base of each panel.
STEP 11:
Insert parts R and S, the walkway, into the castle.
STEP 12:
Lay out parts T, U andV
Your castle is now ready to play with.
R
O
N
Q
P
S
T
U
V
V
Copyright© 2021 G.L.T.C. Ltd. All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
E
J
I