Great Little Trading Turbo Garage L4209 User manual

1
A few important pointers before you start:
• Please read the instructions right through before you start, and check
that all the components have been included in the pack; we nd
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
• Make sure you have the right tools.Allen keys are provided if required,
but screw drivers and other tools are not. You’ll nd details of the tools
you need at the beginning of the instructions.
• It’s a good idea to build the unit in the room where you are going to be
using it, to avoid the need to move it after it’s been assembled.
• Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you’ll sail
through the whole process. But if it all feels a bit too much
like hard work, then we do have an assembly company we
can recommend: the Flatpack Construction Company offers a
nationwide service and can be contacted on 0843 289 4951 or
www.atpackconstruction.co.uk.
Turbo Garage
L4209
19/05/2017
V1
easy - medium - hard
Assembly Difculty
one-person job

2
Safety Warnings:
• Adult assembly required.
• Not suitable for children under 3 years due to small parts that may
become detached and present a choking hazard.
• Children should be kept away from the product during assembly to
avoid any possible risk of injury.
• DO NOT use power tools in the assembly of this product.
• Assemble and use on a at and level surface.
• Check all xtures and ttings regularly and tighten as necessary.
• Check item regularly for signs of damage which may make the product
unsafe.
• Complies to the European Toy Safety Directive.
• Please retain these instructions for future reference.
Customer Service:
• If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
• We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
• Wipe clean using a soft damp cloth followed by a dry cloth.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
• Do NOT expose the item to extremes of heat and humidity.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [e-mail]
Thank you

3
Component Check List
#1
36x Screws
19mmL
A C
1x 1x 1x
B
You will need
(not supplied)
Phillips Head Screwdriver
1x 3x 1x
1x 1x 1x
1x 2x 1x
2x 1x 1x
1x 1x 1x
1x 1x 4x
1x 1x
D FE
G IH
J LK
M ON
P RQ
S UT
V W

4
Hardware for Step 1:
1x #1 19mmL screws
STEP 2:
Attach 3x pillars (E) to rst
oor panel (D) using 3x
screws (#1).
Now attach block F to the
underside of panel D using 2x
screws (#1).
STEP 4:
Attach lift tower panels I and
J to base panel (G) using 4x
screws (#1).
A
#1
B
C
Hardware for Step 2:
5x #1 19mmL screws
D
E
E
E
F
#1
#1
#1 #1
#1
Hardware for Step 3:
3x #1 19mmL screws H
G
#1 #1 #1
#1 #1
#1 #1
I
J
Hardware for Step 4:
4x #1 19mmL screws
G
STEP 1:
Thread the lift spindle (A) through
piece B. Now attach the cog (C)
to spindle (A) through piece B
using 1x screw (#1).
STEP 3:
Attach panel H to base panel (G)
usings 3x screws (#1).
underside of panel D
secure F with these holes
We suggest building the garage on a soft surface to prevent accidental damage
during assembly.

5
STEP 5:
Attach 4x pillars (V) to base panel (G)
using 4x screws (#1). The ‘G’ artwork
on the pillars should be facing inward.
Hardware for Step 5:
8x #1 19mmL screws
G
#1 #1 #1 #1 #1 #1 #1 #1
Attach mechanic ramp (L)
to base panel (G) using 2x
screws (#1).
V
V
V
V
KK
L
D
M
2X
V
V
V
V
H
#1
#1 #1
#1
#1
#1
Hardware for Step 6:
6x #1 19mmL screws
STEP 6:
Attach rst oor panel (D) to 4x pillars (V) and panel H
using 6x screws (#1).
When attaching the
rst oor panel, also
insert the 2x car wash
rollers (M) into the
holes on the base (G)
and block F (underside
of panel D).
Hardware for Step 7:
2x #1 19mmL screws
N
KK
#1
#1
STEP 7:
Attach panel N to 2x petrol pumps
(K) using 2x screws (#1).
Ensure the dowels on the front of
panel D slot into the holes on the
back of piece N.
D
Hardware for Step 8:
3x #1 19mmL screws
O
#1
#1
#1
E
E
E
STEP 8:
Attach second oor
panel (O) to 3x pillars (E)
using 3x screws (#1).
Now attach 2x petrol
pumps (K) to base panel
(G) using 2x screws (#1).
Rollers should be
placed this way up.

6
Copyright© 2017 G.L.T.C. Ltd. All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
J
B
A
STEP 9:
Insert panel P
between panels I and J.
Carefully slide the
lift assembly (step 1)
between the grooves
on the inside of panels
I and J.The chamfered
base lift edge should
be facing towards the
back of the garage.
With the lift in
position, insert panel B
between panels I and J.
Ensure the spindle
goes through the
elastic on panel P then
into the hole.
I
P
P
Reverse assembled view
spindle goes through
the elastic on panel P
then into the hole.
#1#1 #1 #1
Hardware for Step 10:
4x #1 19mmL screws
STEP 10:
Attach piece Q to
panels J and I using 4x
screws (#1).
Q
JI
STEP 11:
Attach ramp R to
panel O, the ramp
rests on the dowels.
Attach ramp S to
panels D and G, the
ramp dowels slot into
the holes on panel G.
Finally attach the
garage sign (T) this
slots into panel N.
STEP 12:
The assembly is now complete.
R
S
TD
G
O
N
at edge
facing
forwards