Great Little Trading Piccolo Café L4710 User manual

1
Piccolo Café
13/05/2019
V1
easy - medium - hard one-person job
L4710
A few important pointers before you start:
•Please read the instructions right through before you start, and check
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
•Make sure you have the right tools.Allen keys are provided if required,
you need at the beginning of the instructions.
•Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
Hopefully our eorts will have been worthwhile and you’ll sail
through the whole process. But if it all feels a bit too much
like hard work, then we do have an assembly company we
can recommend: the Flatpack Construction Company oers a
nationwide service and can be contacted on 0843 289 4951 or

2
Safety Warnings:
• Adult assembly required.
• Unassembled product contains small parts which may present a
choking hazard.
• Children should be kept away from the product during assembly to
avoid any possible risk of injury.
• Not suitable for children under 3 years due to small parts which
present a choking hazard.
• Assemble and use on a at and level surface.
• To avoid possible injury, DO NOT allow children to climb/stand on the
product.
• DO NOT use power tools in the assembly of this product as there is a
risk of over-tightening and consequently splitting of the wood.
• Check item regularly for signs of damage which may make the product
unsafe.
• Check all xtures and ttings regularly and tighten as necessary.
• Complies to the European Toy Safety Directive.
• DO NOT use this item if any structural components are missing or
damaged.
• Please retain these instructions for future reference.
Customer Service:
• If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
• We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
• Wipe clean using a soft damp cloth followed by a dry cloth.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
• Do NOT expose the item to extremes of heat and humidity.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [e-mail]
Thank you

3
Component Check List
A B C D
E F G H
I J K L
M N
1x 1x 1x 1x
1x 2x 1x 1x
1x 1x 1x 1 x
1x 2x
#1Y
10x Barrel Nuts
10x Barrel Nut Bolts16x
#2
2x 1x
1x 6x 6x 6x
1x 2 x 1x
S T
U V
O P
Q R
W
6x
X
4x Screws
21mmL
#3
You will need
(not supplied)
Phillips Head
Screwdriver

4
STEP 1:
Attach part B to base A using 2x barrel nuts and bolts.
STEP 2:
Position panel C as shown, slotting the dowels in place.Then attach part D
using 2x barrel nuts and bolts.
STEP 3:
Position front panel E as shown, slotting the central dowel in place.
Then secure panel D to panel E using x1 barrel nut and bolt.
STEP 4:
Position part F as shown, slotting dowels into the holes on panel B.
A
B
#1
#1
#2
#2
#1
#1
#2
#2
D
C
E
#2
#1
F
Hardware for Step 1:
2x #1 barrel nut bolts
2x #2 barrel nuts
Hardware for Step 2:
2x #1 barrel nut bolts
2x #2 barrel nuts
Hardware for Step 3:
1x #1 barrel nut bolt
1x #2 barrel nut
D
B

5
Hardware for Step 7:
2x #3 21mmL screws
STEP 6:
Slot panel H into the grooves on the internal faces of B and G.
STEP 8:
Attach assembled counter section to panel D using
2x barrel nuts and bolts. Now attach the counter
section to panel G using 2x screws.
STEP 5:
Attach the other end panel (G) to panel A using 3x barrel nuts and bolts.
Ensure dowels on panel F slot into the slots on panel G.
STEP 7:
Attach panel J to panel I using 2x screws as shown.
#1
#2
#1 #1
#2
#2
H
I
J
#1 #1
#2 #2
#3
#3
#3
#3
Hardware for Step 5:
3x #1 barrel nut bolts
3x #2 barrel nuts
Hardware for Step 8:
2x #1 barrel nut bolts
2x #2 barrel nuts
2x #3 21mmL screws
G
F
A
BG
G
D

6
Copyright© 2019 G.L.T.C. Ltd. All rights reserved.
Great LittleTrading Company and GLTC are registered trade marks of G.L.T.C. Limited.
The assembly is now complete.