Great Little Trading Sixpence Play Shop L4701 User manual

1
Sixpence Play Shop
L4701
09/07/2019
V1
easy - medium - hard
Assembly Difculty
two-person job
A few important pointers before you start:
• Please read the instructions right through before you start, and check
that all the components have been included in the pack; we nd
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
• Make sure you have the right tools.Allen keys are provided if required,
but screw drivers and other tools are not. You’ll nd details of the tools
you need at the beginning of the instructions.
• Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
Thank you for shopping with GLTC, we hope you enjoy
having this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you’ll sail
through the whole process. But if it all feels a bit too much
like hard work, then we do have an assembly company we
can recommend: the Flatpack Construction Company offers a
nationwide service and can be contacted on 0843 289 4951 or
www.atpackconstruction.co.uk.

2
Safety Warnings:
• Warning: Not suitable for children under 3 years due to small parts
which may become detached an present a choking hazard.
• Adult assembly required.
• Unassembled product contains small parts which may present a
choking hazard.
• Caution, some children may require assistance from an adult when
manoeuvring the product.
• To avoid possible injury from tipping, do not allow children to climb on
the product.
• Children should be kept away from the product during assembly to
avoid any possible risk of injury.
• Assemble and use on a at and level surface.
• DO NOT use power tools in the assembly of this product as there is a
risk of over-tightening and consequently splitting of the wood.
• This product is heavy, so we recommend that you build it where you
are planning to use it.
• Check all xtures and ttings regularly and tighten as necessary.
• Please retain these instructions for future reference.
Customer Service:
• If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
• We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
• Wipe clean using a soft damp cloth followed by a dry cloth.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
• Do NOT expose the item to extremes of heat and humidity.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [e-mail]
Thank you

3
Component Check List
M
1x Pair of Curtains
A B
C D
E F
G H
1x Counter1x Base Panel
1x Bottom Shelf
1x Large Blackboard Panel1x Headboard
K L
1x Right Side Door
1x Middle Shelf
1x Left Side Panel 1x Right Side Panel
I J
1x Canopy1x Short Blackboard Panel
1x Left Side Door

4
Component Check List
#1 #2
4x Wheels2x Pole Cradles
#3 #4
#5 #6
#7
12x Cam Locks12x Cam Dowels
10x Screws
32mmL
30x Screws
12mmL
Phillips Head Screwdriver
You will need (not supplied)
2x Screws
24mmL
Hardware for Step 1:
6x #3 Cam Dowels
1x #1 Pole Cradles
1x #5 12mmL Screws
STEP 1:
Lie panel A down with drill holes facing up and insert 6x cam dowels (#3) and
secure 1x pole cradle (#1) using x1 12mmL screw (#5) as shown above.
#3 #3
#3
#3 #3
#3
#3
#1
#5
#1
A
Small Phillips Head Screwdriver
You will need (not supplied)

5
STEP 3:
Attach the 4x wheels (#2) to the base panel (C) using the 4x 12mmL screws
(#5) per wheel.
Hardware for Step 3:
16x #5 12mmL Screws
4x #2 Wheels
STEP 2:
Lie panel B down with drill holes facing up and insert 6x cam dowels (#3) and
secure 1x pole cradle (#1) using x1 12mmL screw (#5) as shown above.
B
#3
#3
#3
#3
#3
#3
#1
#5
#3
Hardware for Step 2:
6x #3 Cam Dowels
1x #1 Pole Cradles
1x #5 12mmL Screws
C
#1
#2
#2
#2
#2
#5 x4
#5 x4
#5 x4
#5 x4

6
STEP 4:
Attach the counter (D) to side panel (A) using 2x cam locks (#4).Turn cam
locks clockwise to lock.
Hardware for Step 4:
2x #4 Cam Locks
STEP 5:
With the help of a second person attach the middle shelf (E) to side panel (A)
using 2x 32mmL screws (#6).
Hardware for Step 5:
2x #6 32mmL Screws
A#4
#4
#4
D
A
E
#6
#6
The help of a second
person may make this
step easier.

7
STEP 7:
Attach the Base Panel (C) to side panel (A) using 2x cam locks (#4).Turn cam
locks clockwise to lock.
STEP 6:
Attach the bottom shelf (F) to side panel (A) using 2x 32mmL screws (#6).
Hardware for Step 6:
2x #6 32mmL Screws
A
#6
#6
F
Hardware for Step 7:
2x #4 Cam Locks

8
STEP 8:
Attach head board (G) to side panel A using using 2x cam lock (#4).Turn cam
lock clockwise to lock.
STEP 9:
With the help of a second person. Carefully turn the structure on its side, as
shown above.
Slide the large blackboard panel (H) into the groove on the underside of panel
D and the inside of panel F.
Secure panel H to panel F using 2x screws (#6).
G
Hardware for Step 8:
2x #4 Cam Locks
#4 #4
#4
Hardware for Step 9:
2x #6 32mmL Screws
A

9
STEP 11:
Fit the canopy (J) into place on the holes inside side panel A.
STEP 10:
Slide the short blackboard panel (I) into the groove on the top side of panel C
and the inside of panel F
J
A

10
STEP 12:
Insert 2x cam locks (#4) into panels C, D and G.The arrows on the cam locks should
point towards the hole on the top edge.
STEP 13:
Carefully position panel B over the partial assembled unit. Carefully ensure all of the
cam dowels t into the right holes. Turn the cam locks clockwise to lock on panels C,
D and G.To secure the cam locks underneath panel D, you will need to use a short
philips screw driver.
#4
#4
#4
#4
#4
#4
Hardware for Step 12:
6x #4 Cam Locks
B
G
D
C
Use short Philips Screw
driver when securing cam
locks under panel D.
The help of a second
person may make this
step easier.
G
D
C

11
Hardware for Step 14:
4x #6 32mmL Screws
1x #7 24mmL Screws
STEP 14:
Secure shelves (E and F) to panel B using 4x 32mmL screws (#6). Secure the
poles of the canopy (J) to panel A using 1x 24mmL screw (#7).
STEP 15:
Attach the right hand door (K) to side panel (A) using 6x 12mmL screws (#5).
#7
#6
#6 #6
#6
K
#5 x3
#5 x3
Hardware for Step 15:
6x #5 12mmL Screws
A
B
When the door is correctly
attached the magnetic plate
should be at the Top of the
panel as shown

12
STEP 16:
Attach the left hand door (L) to side panel (B) using 6x 12mmL screws (#5).
Secure the poles of the canopy (J) to panel B using 1x 24mmL screw (#7).
STEP 17:
Take the curtains (M) and slot the pole into the two pole cradles (#1) on the
internal faces of panels A and B.
Hardware for Step 16:
6x #5 12mmL Screws
1x #7 24mmL Screws
#5 x3
#5 x3
#7
M
L
A
B
A
J#1
B

13
Copyright© 2019 G.L.T.C. Ltd. All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
The assembly is now complete.